- montgomery_boats - mailman.xmission.com

Re: M_Boats: self removal from email list
by Dave Scobie 14 Oct '15

14 Oct '15

Sorry to loose you Kevin. the list is automated so to remove yourself see the last section in the link below titled 'To unsubscribe,... '- http:// <http://msog.org/listserv.cfm>msog.org <http://msog.org/listserv.cfm>/ <http://msog.org/listserv.cfm>listserv.cfm <http://msog.org/listserv.cfm> :: Dave Scobie On Oct 13, 2015 1:08 PM, "Kearns, Kevin P" <kkearns(a)pitt.edu> wrote: > Friends, I just sold my M15 (and bought a larger boat). I've loved being > on this list, but can someone (just one) remind me how to remove my name? > I can't recall how I signed up. > > Happy sailing to all of you. The M15 was perhaps the finest of all the > boats I have owned. Thank you Jerry! > > Kevin Kearns > > -----Original Message----- > From: montgomery_boats [mailto: > montgomery_boats-bounces(a)mailman.xmission.com] On Behalf Of David Gilroy > Sent: Tuesday, October 13, 2015 12:36 PM > To: For and about Montgomery Sailboats > Subject: Re: M_Boats: Backstay on a M-15 > > Will do. David > > Sent from my iPhone > > > On Oct 13, 2015, at 12:13 PM, Bert Hall <bert.hall(a)bell.net> wrote: > > > > Hi Again David,If you can find time I would still be interested in > receiving pictures, measurements etc for the backstay you have on your > M-15. My boat is now on the hard so I can start the backstay project. > Thanks RTH. > > > > -----Original Message----- From: David Gilroy > > Sent: Saturday, September 19, 2015 4:59 PM > > To: For and about Montgomery Sailboats > > Subject: Re: M_Boats: Backstay on a M-15 > > > > Bert, > > I'm working this weekend and will try again with picture tomorrow. > > David > > > > Sent from my iPhone > > > >> On Sep 19, 2015, at 12:47 AM, Bert Hall <bert.hall(a)bell.net> wrote: > >> > >> Hello David, Your e mail contained the news I wanted,though there was > no sign of the intended picture. I am especially interested to know what > the 6 inch strut at the mast head looks like and how it is fastened to the > mast. Your help will provide me with a winter project. Thanks a lot. RTH. > >> > >> -----Original Message----- From: David Gilroy > >> Sent: Friday, September 18, 2015 12:59 PM > >> To: For and about Montgomery Sailboats > >> Subject: Re: M_Boats: Backstay on a M-15 > >> > >> Hi all, > >> > >> I have a backstay on my M-15. It splits about 6’ up from the bottom and > attaches at each stern corner. At the top of the mast it attaches to a > horizontal strut that pushes it back about 6”. I’m attaching a picture. I > like having a backstay. I do not like the rest of my mainsail rig which > involves roller furling towards the mast. I’m soon going to rerig it to be > a normal main with reef points. > >> Best regards, > >> David from East Granby, CT > >> > >> > >>> On Sep 18, 2015, at 11:43 AM, Dave Scobie <scoobscobie(a)gmail.com> > wrote: > >>> > >>> Jerry is having email problems so i'm sending this for him - > >>> > >>> On Mike Mann's 15 we made running backstays with 1/8" wire ending in > >>> lines that fastened to the aft mooring cleats. Tyler guessed it > >>> right - used mostly for twin jibs, but also used occasionally for > >>> reading in the tradewinds. > >>> > >>> > >>> -- Jerry Montgomery > >>> > >>>> On Fri, Sep 4, 2015 at 10:28 AM, Tyler Backman <casioqv(a)usermail.com> > wrote: > >>>> > >>>> I don't know if anyone else can chime in on Mike Mann's setup, and > >>>> how he used it... but I was thinking perhaps he only used it for > >>>> running dual headsails in the tradewinds, in order to get forestay > >>>> tension without the mainsail up at all? > >>>> > >>>> Tyler > >>>> > >>>>> On Sep 2, 2015, at 9:04 PM, Tyler Backman <casioqv(a)usermail.com> > wrote: > >>>>> > >>>>> I remember hearing that when Mike Mann sailed his M15 to Hawaii he > >>>>> used > >>>> running backstays. This requires two rope backstays which remain on > >>>> either side of the boom and are alternately tensioned and slacked > when tacking. > >>>>> > >>>>> I think it could have some advantage in making it possible to luff > >>>>> the > >>>> main during a gust without losing headstay tension, allowing one to > >>>> reef a little later. > >>>>> > >>>>> Tyler > >>>>> Davis, CA > >>>>> M15 #157 "Defiant" > >>>>> > >>>>>> On Sep 2, 2015, at 1:58 PM, Bert Hall <bert.hall(a)bell.net> wrote: > >>>>>> > >>>>>> Hello All, Has anyone installed a back stay on a M-15 and if so, > how? > >>>> RTH. > >> > >> > > > > > >

2 1

Backstay on a M-15
by Bert Hall 14 Oct '15

14 Oct '15

Hello All, Has anyone installed a back stay on a M-15 and if so, how? RTH.

9 20

Re: M_Boats: montgomery_boats Digest, Vol 152, Issue 9
by Antonio Martinez 12 Oct '15

12 Oct '15

Interesting comment regarding cockpit draining through slot. I too have wished for a way to quiet the CB - mine bangs a bit regardless of whether up or down. Usually not an issue unless mooring is a bit 'lively' due to wind/waves or other passing craft. a On Mon, Oct 12, 2015 at 2:00 PM, < montgomery_boats-request(a)mailman.xmission.com> wrote: > Send montgomery_boats mailing list submissions to > montgomery_boats(a)mailman.xmission.com > > To subscribe or unsubscribe via the World Wide Web, visit > > https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > or, via email, send a message with subject or body 'help' to > montgomery_boats-request(a)mailman.xmission.com > > You can reach the person managing the list at > montgomery_boats-owner(a)mailman.xmission.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of montgomery_boats digest..." > > > Today's Topics: > > 1. Re: M15 Centerboard Gasket (Mark Dvorscak) > 2. Re: M15 Centerboard Gasket (GARY M HYDE) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 12 Oct 2015 10:13:43 -0700 > From: Mark Dvorscak <mdvorscak56(a)gmail.com> > To: For and about Montgomery Sailboats > <montgomery_boats(a)mailman.xmission.com> > Subject: Re: M_Boats: M15 Centerboard Gasket > Message-ID: <j4y1o9axcvxo506woqsiwgr2.1444670023622(a)email.android.com> > Content-Type: text/plain; charset=utf-8 > > The M15 cockpit drain empties into the centerboard trunk. A gasket might > slow the drain or stop it as well as trapping any grit or debris next to > the centerboard where it could cause other problems. > > Sent from my U.S. Cellular? smartphone > > casioqv(a)usermail.com wrote: > > >Has anyone installed a centerboard gasket on there M boat? I know it > should have a performance benefit, > >but I am also interested in the possibility that it would quiet down the > centerboard clunk when sleeping. > > > >I am thinking about copying this setup on a SCAMP, which simply involves > taping on dacron cloth with 3M double sided tape: > > > http://woodnmetalguy.blogspot.com/2015/01/installing-centerboard-slot-gaske… > > > >Defender sells 3" Hawk Slot strip for $3.99/foot: > > > http://www.defender.com/product3.jsp?path=-1|10918|2259972|2259998|2260009&… > > > >I was doubtful that simple two-sided tape could hold up below the > waterline, but from 3M's advertising claims, it sounds possible: > > > >The 3M 5952 tape is advertised as "strong enough to replace screws, > rivets and studs and permanently adhere one material to another" and > >"create a permanent seal against water, moisture, salt and more." > > > >I have yet to see a 3M product not live up to it's advertised > specifications, as long as the instructions are followed. > > > >Sincerely, > >Tyler > >Davis, CA > >M15 #157 Defiant > > > > ------------------------------ > > Message: 2 > Date: Mon, 12 Oct 2015 10:35:01 -0700 > From: GARY M HYDE <gmhyde1(a)mac.com> > To: For and about Montgomery Sailboats > <montgomery_boats(a)mailman.xmission.com> > Subject: Re: M_Boats: M15 Centerboard Gasket > Message-ID: <6E3916B5-EDA4-45FB-ABE3-05E9727EC9AE(a)mac.com> > Content-Type: text/plain; charset=utf-8 > > Raise the board when at anchor or docked. Then it won't clunk and saves > wear on it. > > ~~~_/)~~~ Gary > Sent from my iPhone :-) > > > On Oct 12, 2015, at 10:13 AM, Mark Dvorscak <mdvorscak56(a)gmail.com> > wrote: > > > > The M15 cockpit drain empties into the centerboard trunk. A gasket might > slow the drain or stop it as well as trapping any grit or debris next to > the centerboard where it could cause other problems. > > > > Sent from my U.S. Cellular? smartphone > > > > casioqv(a)usermail.com wrote: > > > >> Has anyone installed a centerboard gasket on there M boat? I know it > should have a performance benefit, > >> but I am also interested in the possibility that it would quiet down > the centerboard clunk when sleeping. > >> > >> I am thinking about copying this setup on a SCAMP, which simply > involves taping on dacron cloth with 3M double sided tape: > >> > http://woodnmetalguy.blogspot.com/2015/01/installing-centerboard-slot-gaske… > >> > >> Defender sells 3" Hawk Slot strip for $3.99/foot: > >> > http://www.defender.com/product3.jsp?path=-1|10918|2259972|2259998|2260009&… > >> > >> I was doubtful that simple two-sided tape could hold up below the > waterline, but from 3M's advertising claims, it sounds possible: > >> > >> The 3M 5952 tape is advertised as "strong enough to replace screws, > rivets and studs and permanently adhere one material to another" and > >> "create a permanent seal against water, moisture, salt and more." > >> > >> I have yet to see a 3M product not live up to it's advertised > specifications, as long as the instructions are followed. > >> > >> Sincerely, > >> Tyler > >> Davis, CA > >> M15 #157 Defiant > >> > > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > montgomery_boats mailing list > montgomery_boats(a)mailman.xmission.com > https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > Remember, there is no privacy on the Internet! > > > ------------------------------ > > End of montgomery_boats Digest, Vol 152, Issue 9 > ************************************************ > -- *Antonio Martinez* *Middle River Studio* 540-248-3310 (h) 540-414-4782 (c)

1 0

Re: M_Boats: M15 Centerboard Gasket
by Mark Dvorscak 12 Oct '15

12 Oct '15

The M15 cockpit drain empties into the centerboard trunk. A gasket might slow the drain or stop it as well as trapping any grit or debris next to the centerboard where it could cause other problems. Sent from my U.S. Cellular® smartphone casioqv(a)usermail.com wrote: >Has anyone installed a centerboard gasket on there M boat? I know it should have a performance benefit, >but I am also interested in the possibility that it would quiet down the centerboard clunk when sleeping. > >I am thinking about copying this setup on a SCAMP, which simply involves taping on dacron cloth with 3M double sided tape: >http://woodnmetalguy.blogspot.com/2015/01/installing-centerboard-slot-gaske… > >Defender sells 3" Hawk Slot strip for $3.99/foot: >http://www.defender.com/product3.jsp?path=-1|10918|2259972|2259998|2260009&… > >I was doubtful that simple two-sided tape could hold up below the waterline, but from 3M's advertising claims, it sounds possible: > >The 3M 5952 tape is advertised as "strong enough to replace screws, rivets and studs and permanently adhere one material to another" and >"create a permanent seal against water, moisture, salt and more." > >I have yet to see a 3M product not live up to it's advertised specifications, as long as the instructions are followed. > >Sincerely, >Tyler >Davis, CA >M15 #157 Defiant >

3 2

End of Season
by George Iemmolo 08 Oct '15

08 Oct '15

Removed sails Monday hauled boat Yesterday & power washed hull. Removed all items from boat to storage today. Get Jib and Fore stay ready to send to Sail Care for conversion to roller furling. Great season here are some Stats. Season 4/23 thru 10/7, 50 Boat touches of which 24 were Sailing outings absorbing 150 hours & driving 1535 mi. . Findmespot.com <http://l.facebook.com/l.php?u=http%3A%2F%2Ffms.ws%2FRCw0C%2F41.50390N%2F87.…> FINDMESPOT.COM George "We Can Not Control the Wind But We Can Adjust Our Sails"

3 3

Nice used M 15 available.
by Bob Eeg 05 Oct '15

05 Oct '15

I am selling a clean 1992 M_15 that has a newer Pacific Trailer, new sails and newer 3.5 Suzuki. It is the boat on the left in this photo. This boat won the Cruiser Challenge and can be delivered to the Bay Area. Please contact me off list for details. Also have another new M_15 available as well. Thanks Bob 949-489-8227 Sent from my iPad

3 7

Montgomery 15
by peter kunst 03 Oct '15

03 Oct '15

Hello My Name is Pete, I have been a member for a while. ( a few years ) and last year ( May ) aquired a 1983 Montgomery 15 # 243, I am the 3rd owner of the Boat, and absolutly Love it. I spent the beginning of the year restoring her, and spent the month of Sept (2015) Sailing her ( with my wife Kate) on Lake Pend Oreille . My Question is regarding the Bow Pulpit, I currently have the for lack of a better term have the Ballon catcher, and would like to replace it with the more modern style ( the type that is on Scred ) the question is, are the deck holes in the same location to accept the newer style ? and what does a new one cost ? and who makes them ? Best Regards,Pete M-15 #243

2 2

Montgomery 15 - pulpit
by David Grah 03 Oct '15

03 Oct '15

I managed to bend the pulpit on my 1986 Montgomery 15 this summer when I was rear-ended in heavy freeway traffic. I am in the process of getting a replacement. Railmakers.com makes them but I am planning to get a pulpit used on the Sage 17 from Sage Marine. Yours looks pretty stock to me. Pretty boat! David GrahBishop CaliforniaMontgomery 15 - Sky Message: 1 Date: Sat, 3 Oct 2015 19:44:01 +0000 From: peter kunst <peterkunstt(a)hotmail.com> To: "." <montgomery_boats(a)mailman.xmission.com> Subject: M_Boats: Montgomery 15 Message-ID: <BLU175-W27E7C92A22632C5FA3EACFBA4A0(a)phx.gbl> Content-Type: text/plain; charset="iso-8859-1" Hello My Name is Pete, I have been a member for a while. ( a few years ) and last year ( May ) aquired a 1983 Montgomery 15 # 243, I am the 3rd owner of the Boat, and absolutly Love it. I spent the beginning of the year restoring her, and spent the month of Sept (2015) Sailing her ( with my wife Kate) on Lake Pend Oreille . My Question is regarding the Bow Pulpit, I currently have the for lack of a better term have the Ballon catcher, and would like to replace it with the more modern style ( the type that is on Scred ) the question is, are the deck holes in the same location to accept the newer style ? and what does a new one cost ? and who makes them ? Best Regards,Pete M-15 #243

1 0

Re: M_Boats: New Sage
by Michael Ray Wisely 02 Oct '15

02 Oct '15

Hi All, Looks like another sweet boat Jerry and Dave. I so enjoyed my M-17 #384 Molly M. I sold her in the spring as I needed shoulder surgery and knew I wouldn't be using her for almost a year. I'll be looking into a 15 this time…Maybe I can afford a Sage? Don't know if I could do without a Jib though as I like the extra hp in light wind and I like running the jib. SF Bay also likes having multiple sail options. Such a good looking boat and I'm sure she sails great. Congratulations Jerry and Dave and company. You're gonna make a lot of future sailors very happy happy. Hoping to be back sailing something designed by JM or Hess soon. Michael Wisely On Oct 2, 2015, at 11:00 AM, montgomery_boats-request(a)mailman.xmission.com wrote: > Send montgomery_boats mailing list submissions to > montgomery_boats(a)mailman.xmission.com > > To subscribe or unsubscribe via the World Wide Web, visit > https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > or, via email, send a message with subject or body 'help' to > montgomery_boats-request(a)mailman.xmission.com > > You can reach the person managing the list at > montgomery_boats-owner(a)mailman.xmission.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of montgomery_boats digest..." > > > Today's Topics: > > 1. Re: Video of first sea trail of Sage 15 SageCat (ie, catboat > version) (GARY M HYDE) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 01 Oct 2015 14:08:53 -0700 > From: GARY M HYDE <gmhyde1(a)mac.com> > To: For and about Montgomery Sailboats > <montgomery_boats(a)mailman.xmission.com> > Subject: Re: M_Boats: Video of first sea trail of Sage 15 SageCat (ie, > catboat version) > Message-ID: <AA7668C0-BA06-46EC-B028-E1D8B929BD70(a)mac.com> > Content-Type: text/plain; charset=us-ascii > > Thx Dave. > > ~~~_/)~~~ Gary > Sent from my iPhone :-) > >> On Oct 1, 2015, at 5:03 AM, Dave Scobie <scoobscobie(a)gmail.com> wrote: >> >> Gary. >> >> We will be putting together more videos about the boat including how to rig >> it. >> >> :: Dave Scobie >>> On Sep 29, 2015 7:58 PM, "GARY M HYDE" <gmhyde1(a)mac.com> wrote: >>> >>> Very nice. Show us how to step the mast & rig it please. >>> >>> ~~~_/)~~~ Gary >>> Sent from my iPhone :-) >>> >>>> On Sep 29, 2015, at 6:10 PM, Dave Scobie <scoobscobie(a)gmail.com> wrote: >>>> >>>> The Jerry Montgomery designed Sage 15 SageCat underwent her first sea >>> trail >>>> yesterday (28 Sept. '15). Here is a link to a video of the occasion - >>>> >>>> https://youtu.be/vDT5_KqnOoI >>>> >>>> >>>> -- >>>> :: Dave Scobie >>>> :: former M15 owner - www.freewebs.com/m15-named-scred >>>> :: M17 #375 SWEET PEA - www.m17-375.webs.com >>> >>> > > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > montgomery_boats mailing list > montgomery_boats(a)mailman.xmission.com > https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > Remember, there is no privacy on the Internet! > > > ------------------------------ > > End of montgomery_boats Digest, Vol 152, Issue 2 > ************************************************

1 0

Video of first sea trail of Sage 15 SageCat (ie, catboat version)
by Dave Scobie 01 Oct '15

01 Oct '15

The Jerry Montgomery designed Sage 15 SageCat underwent her first sea trail yesterday (28 Sept. '15). Here is a link to a video of the occasion - https://youtu.be/vDT5_KqnOoI -- :: Dave Scobie :: former M15 owner - www.freewebs.com/m15-named-scred :: M17 #375 SWEET PEA - www.m17-375.webs.com

3 5