- USR-TC - mailman.xmission.com

WTB: Hiper NMC NIC/NAC set
by Russell Newberry 14 Jun '04

14 Jun '04

Hi guys, I need a Hiper NMC set. Anyone have a spare? Thanks, Russell Newberry ==================== Maxis Technologies, Inc 433 W. Wilshire Blvd. Ste 2B Oklahoma City, OK 73116 Voice: 1-800-79-MAXIS Int'l: 1-405-842-3331 FAX: 1-405-841-7882 find us on the web at www.maxistech.net email to: russell(a)maxistech.net AOL IM "RUSSELLatMAXIS"

1 0

Anybody have alarm server working with NMC 8.6.3?
by choi 11 Jun '04

11 Jun '04

Please post below message for me. Thank you. --------------------------------------------------------------------------------------------------------------------------------------- If anybody has alarm server working with NMC 8.6.3, please send me. I have tried old version alarm server with NMC 8.6.3 but it doesn't seem to be working correctly. Please help me !! Thank you. Best Regards Ms. Choi Thai System Integration Co.Ltd. Internet Service Provider & Online Game www.asianet.in.th, www.laghaim.co.th, www.toksclub.in.th Bangkok : 2F Times Square Bldg, Sukhumvit Soi 12~14 Klongtoey, Bangkok 10110 Thailand Tel : +(662) 653-3636~9 Fax : +(662) 653-3635 Pattaya : 475/1-3, Moo 4, Sukhumvit Rd Naklua, Banglamung, Chonburi 20150 Thailand Tel : +(6638) 727-727 Fax : +(6638) 727-726 This message is intended solely for the designated recipient, may contain privileged or confidential information and may be subject to confidentiality agreement(s). Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. If you have received this message in error, please notify the sender immediately by reply e-mail and destroy the original communication.

1 0

FS: Quad Modem RS-232 cables
by Greg Coffey 11 Jun '04

11 Jun '04

I think I have about 20 of these left. Anyone interested in them? I'm also interested in knowing which of the turbo dial up companies to affiliate with. Don't have that many dial up customers at this point but have a couple asking about the "enhanced" service. We don't offer anything of that sort at this point.

2 1

USR Total Control Hub For Sale
by Edward Rempala 10 Jun '04

10 Jun '04

Any one need a total control hub. Specs 12 Digital Quad Modems Dual PRI NAC Card HiPer Access Router Card Network MGT. Card 2 45A PSU Cards All in a Standard Rack Mount Case

2 2

TC1000 with two radius
by Gastón 08 Jun '04

08 Jun '04

Hi, IÂ´d like to know if thereÂ´s a way to manage one tc1000 with two different radius servers. For example one radius for one group of clients and the other one for a differenciated service. I have to do this because my telco is demanding me that clients from one service canÂ´t be in the other one. Thanks.

1 0

Synchronous Connections via TC1000
by Dev 08 Jun '04

08 Jun '04

Currently I have a TC1000 with 14 HiperDSP cards. I would like to configure the HiperDSP cards for Synchronous Connections that will pass data to a server via a socket connection. What do I need to do to make this happen? I have the socket setup but the Synchronous configuration I do not understand? Thank you in advance ---------- UMPA Brian C. Doyle Director, Internet Services United Merchant Processing Association <http://www.umpa-us.com>http://www.umpa-us.com 1-800-555-9665 ext 212

1 0

simultaneous use - 1 chassis, two ARC's
by Lewis Bergman 08 Jun '04

08 Jun '04

I am using ICRadius with my TC1000. All reply items have Simultaneous-use = 1. I also use SNMP to ask the ARC if a user is on or not. What seems to be happening is that a user can dial in and get his first session from one ARC. A second dialer can then hit the second ARC and also be allowed in. The RADIUS server checks the ARC via SNMP and verifies that the user isn't on. Of course the user is on, just not on that ARC. Has anyone seen this and if so what did you do about this? I have double checked and all works as expected when the duplicate user hits the same ARC. -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 301 800-299-6962

4 5

Knowledge base
by Jim Sheldon 08 Jun '04

08 Jun '04

Is there a knowledge base out there for the Total Control 1000? I've been running robbed bit T's for some time now and I need to switch to ISDN PRI's. looking for a walk through or setup help. Jim Sheldon Texas Communications 979-775-6239 x340 --- [This E-mail scanned for viruses by Declude Virus]

2 1

Interface: Unassigned
by Indiver Badal 29 May '04

29 May '04

Hi, I am having problem with a Total Control box (Dual E1 PRI, Quadmodems, NetServer and NMC). It accepts call, the modem handshakes properly, then it can not connect to NetServer. Nothing appears on terminal window. I have three similar boxes working just fine and I have tries to replicate the settings from the working box but still, I can not change one of the options: When I do show s5, Command> show s5 --------------------- Current Status - Port S5 ------------------- Status: IDLE Input: 0 Parity Errors: 0 Output: 0 Framing Errors: 0 Pending: 0 Overrun Errors: 0 Active Configuration Default Configuration -------------------- --------------------- Port Type: Netwrk Netwrk (Dial In) Login Service: Telnet Telnet Device Service: Netdata@6000 Netdata@6000 Modem Stat: READY ACTIVE Databits: 8 8 Stopbits: 1 1 Parity: none none Flow Control: None None Modem Control: on on HDLC Framing: PPP in modem PPP in modem SLIP Framing: SLIP in NETServer SLIP in NETServer Remote Host: 0.0.0.0 0.0.0.0 Interface: Unassigned (PPP,Quiet,C (PPP,Quiet,Compress) Mtu: 0 1500 Async Map: L:00000000 R:00000000 00000000 -- Press Return for More -- Modem Presence: Modem is present Init Script: (None) Init When?: Never Login Prompt: welcome Autolog Name: off Idle Timeout: 15 min 0 sec Login Message: 'Welcome' Dial Group: 0 TAP type: OFF OFF It shows 'Interface: Unassigned', whereas, on the working box, it shows 'Interface: ptp5'. Please help. Regards Indiver

2 1

RE: [USR-TC] Multilink PPP Problem
by Joel - Fox Computers 28 May '04

28 May '04

I believe you need to configure MPIP if you are using more than one ARC. - Joel -----Original Message----- From: John R. Aynesworth [mailto:jra@hcsinc.com] Sent: Thursday, May 27, 2004 10:48 AM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] Multilink PPP Problem I don't have MPIP configured at all--as best I can figure, that would only be necessary if I had more than one Total Control. Am I wrong? John R. Aynesworth Alexssa/Hnet 303 N. Main St. West Bend, WI 53095 voice: (262) 338-3742 fax: (262) 338-3387 email: jra(a)hnet.net

2 1