- USR-TC - mailman.xmission.com

RE: [USR-TC] 3COM RAS 1000 software needed
by Adam Barnhill 28 Apr '04

28 Apr '04

Source-t.com Solunet.com Or buy directly from UTSTAR -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Arpad Toth Sent: Tuesday, April 27, 2004 4:32 AM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] 3COM RAS 1000 software needed Hello, my name is Arpad Toth and I am working in an ISP in Serbia and Montenegro (http://www.tippnet.co.yu/us/index.tts) Recently we have purchased a 3Com Total Controll Chasis with 2 HiPer DSP- E1/PRI cards and a Network Management Card (among others). We have found a "Software Matrix" on support.utstar.com and realised that the cards have old software versions (2.0.51 for the HiPer DSP, and 6.1.17 for the NMC). Can anybody sugess me a way to purchase newer versions? I think that would be 3.7.4 for the HiPer DSP, and 7.1.8 for the NMC. Thank You in advance! _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: [USR-TC] TCM Error on E1 DSP ?
by Adam Barnhill 28 Apr '04

28 Apr '04

This is particularly true when using TCM 8.2.96 with any TCS version below 4.5 -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Joel - Fox Computers Sent: Tuesday, April 27, 2004 9:04 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] TCM Error on E1 DSP ? Had not even checked software versions on it yet. I'll give that a look. Thanks! -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Tuesday, April 27, 2004 7:43 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] TCM Error on E1 DSP ? Is the code running on the NMC within the same release version as total control manager? I've had issues pulling up chassis's or certain things when running at different version levels. Todd ----- Original Message ----- From: "Joel - Fox Computers" <jfox(a)foxcomputers.com> To: <usr-tc(a)mailman.xmission.com> Sent: Monday, April 26, 2004 11:13 AM Subject: [USR-TC] TCM Error on E1 DSP ? > > Having a problem. Trying to help someone out configuring a chassis, and I can't access a 30 channel DSP (E1 version) with my TCM. > > Here's the error: > > I click the lights at the top of the card. Click Configure->Programmed Settings, and get an error message that says "Error Opening Device Description File". > > Anyone have any suggestion, or the correct file I need to make it work? > > Thanks, > > Joel > > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: [USR-TC] TCM Error on E1 DSP ?
by Joel - Fox Computers 27 Apr '04

27 Apr '04

Had not even checked software versions on it yet. I'll give that a look. Thanks! -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Tuesday, April 27, 2004 7:43 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] TCM Error on E1 DSP ? Is the code running on the NMC within the same release version as total control manager? I've had issues pulling up chassis's or certain things when running at different version levels. Todd ----- Original Message ----- From: "Joel - Fox Computers" <jfox(a)foxcomputers.com> To: <usr-tc(a)mailman.xmission.com> Sent: Monday, April 26, 2004 11:13 AM Subject: [USR-TC] TCM Error on E1 DSP ? > > Having a problem. Trying to help someone out configuring a chassis, and I can't access a 30 channel DSP (E1 version) with my TCM. > > Here's the error: > > I click the lights at the top of the card. Click Configure->Programmed Settings, and get an error message that says "Error Opening Device Description File". > > Anyone have any suggestion, or the correct file I need to make it work? > > Thanks, > > Joel > > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

TCM Error on E1 DSP ?
by Joel - Fox Computers 27 Apr '04

27 Apr '04

Having a problem. Trying to help someone out configuring a chassis, and I can't access a 30 channel DSP (E1 version) with my TCM. Here's the error: I click the lights at the top of the card. Click Configure->Programmed Settings, and get an error message that says "Error Opening Device Description File". Anyone have any suggestion, or the correct file I need to make it work? Thanks, Joel

2 1

3COM RAS 1000 software needed
by Arpad Toth 27 Apr '04

27 Apr '04

Hello, my name is Arpad Toth and I am working in an ISP in Serbia and Montenegro (http://www.tippnet.co.yu/us/index.tts) Recently we have purchased a 3Com Total Controll Chasis with 2 HiPer DSP- E1/PRI cards and a Network Management Card (among others). We have found a "Software Matrix" on support.utstar.com and realised that the cards have old software versions (2.0.51 for the HiPer DSP, and 6.1.17 for the NMC). Can anybody sugess me a way to purchase newer versions? I think that would be 3.7.4 for the HiPer DSP, and 7.1.8 for the NMC. Thank You in advance!

1 0

Total Control Manager
by Greg Coffey 26 Apr '04

26 Apr '04

I have been out of the loop for a while regarding the old USR/3Com/ whatever its called today but need to obtain a copy of the Manager software to configure the chassis. I've looked on the 3Com site and searched the web to no avail. I don't know how many copies of that I once had but can't come up with one now. I'd appreciate if someone could point me to a site that has it. Doesn't have to be the latest, greatest, just something that I can look at a couple of DSP's. Thanks. Greg

1 0

Looking for qty 1 Hiper NMC
by Russell Newberry 26 Apr '04

26 Apr '04

Anybody have one of these at a decent price? Thanks, Russell Newberry ==================== Maxis Technologies, Inc 433 W. Wilshire Blvd. Ste 2B Oklahoma City, OK 73116 Voice: 1-800-79-MAXIS Int'l: 1-405-842-3331 FAX: 1-405-841-7882 find us on the web at www.maxistech.net email to: russell(a)maxistech.net AOL IM "RUSSELLatMAXIS"

1 0

RE: [USR-TC] V.90 Modem Code stability
by Joel - Fox Computers 26 Apr '04

26 Apr '04

I'm sure I've heard that there are problems with newer modems and older DSP code. I've had good luck, and would recommend, 3.5.105 or 3.5.109. - Joel -----Original Message----- From: John R. Aynesworth [mailto:jra@hcsinc.com] Sent: Monday, April 26, 2004 10:57 AM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] V.90 Modem Code stability Does anyone have any opinions on the stability of the Total Control's V.90/V.92 code, meaning how well it maintains connections? We're using what I think is older V.90 code (2.1.9), and I've noticed that dialin customers with windows-base softmodems, especially older Rockwell HCF or Lucent LT Winmodems, seem to have more than their share of disconnects. Often, updating the client side modem software improves the situation. I'm wondering if updating the HiPer DSP code on our side would help or hinder. John R. Aynesworth Alexssa/Hnet 303 N. Main St. West Bend, WI 53095 voice: (262) 338-3742 fax: (262) 338-3387 email: jra(a)hnet.net

1 0

V.90 Modem Code stability
by John R. Aynesworth 26 Apr '04

26 Apr '04

Does anyone have any opinions on the stability of the Total Control's V.90/V.92 code, meaning how well it maintains connections? We're using what I think is older V.90 code (2.1.9), and I've noticed that dialin customers with windows-base softmodems, especially older Rockwell HCF or Lucent LT Winmodems, seem to have more than their share of disconnects. Often, updating the client side modem software improves the situation. I'm wondering if updating the HiPer DSP code on our side would help or hinder. John R. Aynesworth Alexssa/Hnet 303 N. Main St. West Bend, WI 53095 voice: (262) 338-3742 fax: (262) 338-3387 email: jra(a)hnet.net

1 0

Re: USR-TC Digest, Vol 14, Issue 4
by mdatiq＠agni.com 23 Apr '04

23 Apr '04

dear Sir, i forget password for my total control-1000 . i do not accseess my tc.why i m recovery tc. why i m accseess my tc. plz quickly response . atiq Quoting usr-tc-request(a)mailman.xmission.com: > Send USR-TC mailing list submissions to > usr-tc(a)mailman.xmission.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr- tc > or, via email, send a message with subject or body 'help' to > usr-tc-request(a)mailman.xmission.com > > You can reach the person managing the list at > usr-tc-owner(a)mailman.xmission.com > > When replying, please edit your Subject line so it is more > specific > than "Re: Contents of USR-TC digest..." > > > Today's Topics: > > 1. Re: Where do I set the NMC console password? (Todd > Bertolozzi) > 2. Sample Conifguration (Mike Adkins) > 3. Dial-Out - no "CONNECT xxx" messages?!? (Greg Ansley) > 4. Re: Dial-Out - no "CONNECT xxx" messages?!? (Todd > Bertolozzi) > 5. WTB: Quad Modem 4 port Fan out cables. (Stephen Rivera - > WRCA.Net) > 6. Anybody interested in TC100 Router (Stephen Rivera - > WRCA.Net) > > > ------------------------------------------------------------------ ---- > > Message: 1 > Date: Thu, 15 Apr 2004 13:41:21 -0400 > From: "Todd Bertolozzi" <berto(a)core.com> > Subject: Re: [USR-TC] Where do I set the NMC console password? > To: "Discussion relating to the 3Com/US Robotics Total Control > modemsystems." <usr-tc(a)mailman.xmission.com> > Message-ID: <008b01c42310$e0218ac0$fa0210ac@slowpoke> > Content-Type: text/plain; charset="iso-8859-1" > > The community string is the password. There's a menu option > entitled password screen enable/disable that allows you to > password protect via the community string the console port. > > Todd > ----- Original Message ----- > From: Adam Barnhill > To: 'Discussion relating to the 3Com/US Robotics Total > Controlmodemsystems.' > Sent: Thursday, April 15, 2004 1:00 PM > Subject: [USR-TC] Where do I set the NMC console password? > > > Is this the RW community I set? > > Where do I configure the Console password for the NMC? > > > > > > ------------------------------------------------------------------ ------------ > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc >

1 0