October 2007 - montgomery_boats - mailman.xmission.com

My British Seagull is missing!!! Stolen ser# EFNRL 22JJI
by GILASAILR＠aol.com 06 Oct '07

06 Oct '07

Missing -Stolen 1981 British Seagull outboard motor stolen from 154th Avenue and Briles in Phoenix/ Peoria, Arizona area. Model number -EFNRL 222JI This is a Model 110 with long range tank, recoil starter Long shaft. Yes it is a big ol GOOFY looking motor - but it will push the Mississippi back to Minnesota! The moter may have been sold in the Phoenix Area. Please e-mail me if you know of any information as to the whereabouts of this motor. Reward offered if recovered. Thank You, Gary Oberbeck _gilasailr(a)aol.com_ (mailto:gilasailr@aol.com) ************************************** See what's new at http://www.aol.com

1 0

Re: M_Boats: (no subject)
by Larry E Yake 06 Oct '07

06 Oct '07

Hi Arnold, I've used a CDI furler on my M17 for several years and wouldn't be without it. It adds a couple minutes work at launch and take-down is all. I leave the sail (a 150 genoa) furled around the foil, slide a custom made sleeve over it for trailering, and strap it all to the mast for trailering. The CDI furler uses it's own internal halyard, which leaves your original halyard available for hoisting a free flying drifter. Or the hanks on your drifter can be modified to use loops with wooden beads which loop around the furled headsail and ride up and down it as you raise and lower the sail. I've tried both ways and prefer to fly the drifter free. Larry On Fri, 5 Oct 2007 17:14:20 -0700 "Arnold F. Sharpe" <afsharpe(a)mac.com> writes: > > hello out in Monty Land, > I am considering a self furling head sail for my M-17. A couple of > > things come to mind: do they present any difficulties when rigging > and > derigging the boat for trailing? Presently, I sail in light winds > with > a big "Drifter", I assume however that it would not be possible to > hank > on the drifter if I had a self furling rig. Thanks in advance for > the > input. > > Regards..Arnold M-17 "Little Breeze" > > > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > >

2 1

Re: M_Boats: 08 Lake of the Woods Renndezvous!!!! Let's Go!!!
by Rmceagrella＠aol.com 05 Oct '07

05 Oct '07

In my opinion all that is required is a " Monty" spirit! R ************************************** See what's new at http://www.aol.com

1 0

Re: M_Boats: 08 Lake of the Woods Renndezvous!!!! Let's Go!!!
by Rmceagrella＠aol.com 05 Oct '07

05 Oct '07

Hey Sean, Bones, ect, The Captain and crew of Raven may be interested if it can be worked out. Rick M23 Raven. 017 ************************************** See what's new at http://www.aol.com

1 0

New Cushions??
by Scott Simpson 05 Oct '07

05 Oct '07

Frank, No, but thanks for asking. I don't know what the story is with this other M-17 that should have been delivered last month along with replacement cushions. I offered to pay the shipping charges for their delivery to me, but Bob is adamant about sending them along with this boat. I am still waiting. Scott Simpson West of One 300 3rd Street, # 903 San Francisco, CA 94107 415. 328.2668 scott(a)westofone.com www.westofone.com

2 1

Re: M_Boats: 08 Lake of the Woods Renndezvous!!!! Let's Go!!!
by Larry E Yake 05 Oct '07

05 Oct '07

Bones, This "Admiral" is taking a leave of absense for 2008. Go for it! Might even be able to join you guys. Won't know for a while, though. Larry On Fri, 5 Oct 2007 04:09:44 GMT "bownez(a)juno.com" <bownez(a)juno.com> writes: > Hello Sean And Listers, > > I will need to investigate a marina/launch area for Lake of the > Woods. There are large power boats on the lake and I know there are > marinas in Minnesota and in Ontario. The Lowisa launches out of > Kenora, on the far north side. Staying in Minnesota will save a lot > of driving time. > Of course, launching and retrieving an M15 or M17 is rather simple > compared to an M23. I know in the San Juans, a travel lift is > employed. However, at my marina, My M23 gets pulled by the > harbormaster using my trailer (on a rather steep ramp) and his > tractor. I launch each spring on my own by simply floating the boat > off the trailer. So, the question here is, given a steep launch > ramp, is a travel lift needed? I think not. Albeit, 4 wheel drive > from a tow vehicle will be required. > We can also think about Vermillion, or Leech Lake. I do know of > marinas on those lakes which slips sailboats. > If there is interest in a Monty regatta, I can certainly begin > investigating possible launch areas and looking over charts. Hate to > horn in on Larry Yake's, Todd's or Doug's "Admiral" positions! > (smile). > > Later, > > Bones > > > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > >

1 0

08 Lake of the Woods Renndezvous!!!! Let's Go!!!
by Nebwest2＠aol.com 05 Oct '07

05 Oct '07

Bones, We self launch the 23 all the time as long as the ramp is fairly steep and concrete or paved with good traction. Wouldn't try it in the dirt. We have an 11 foot tongue extension that allows us to get her back into the water without drowning the tow vehicle. Not sure about the other 23's. We'd be game for either lake. Just the idea of getting together with a bunch of other Monty crews is enough to draw us in! What time of year are we talking about? Sean ************************************** See what's new at http://www.aol.com

2 1

Re: M_Boats: 08 Lake of the Woods Renndezvous!!!! Let's Go!!!
by bownez＠juno.com 05 Oct '07

05 Oct '07

Sean, As far as time of year, would you like a lot of bugs, or, a really huge lot of big bugs? Just kidding. I'd like to do June or early July. Bones

2 1

08 Lake of the Woods Renndezvous!!!! Let's Go!!!
by Nebwest2＠aol.com 05 Oct '07

05 Oct '07

Yeah Todd!.....Montgomery National Rendezvous...now your talkin!!!! Who's goin???? Sean M23 Dauntless ************************************** See what's new at http://www.aol.com

1 0

Re: M_Boats: M-17 early deck model cockpit drain
by GILASAILR＠aol.com 05 Oct '07

05 Oct '07

Sorry to ask a 'dumb' technical question - my boat is not here at the moment. Does anyone know the size tubing used on the early model cockpit drain from the cockpit sole to the thru-hull pipe? Maybe I should go look in the MSOG technical section for repairs - I seem to remember someone replacing the pipe thru hulls............. Trailing off into the sunset -albeit a BEAUTFUL one............ GaryO 1/2 yellow 1/2 white M-17 16 days to Lake Havasu Team Geezer Racing.....Old and in the Way Arizona Sailing Squadron ************************************** See what's new at http://www.aol.com

4 3