April 2002 - montgomery_boats - mailman.xmission.com

Re: M_Boats: Towing Redux
by Conbert H Benneck 26 Apr '02

26 Apr '02

________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/.

1 0

RE: M_Boats: cockpit drain backwash
by Shawn Boles 26 Apr '02

26 Apr '02

Yep - I just had this done. I also had one-way valves installed. Drains exit transom _above_ the water line. I kept the original drain and just put a cork in it. Results are: 1. dry cockpit when sailing. 2. Rapid draining if swamped. 3. Still have a non-grated drain (the original drain with cork removed) available to for washing out the boat and added drain capacity if needed. cheers- Shawn Boles Grey Mist (M17 #276 1978) -----Original Message----- From: Honshells [mailto:chonshell@ia4u.net] Sent: Thursday, April 25, 2002 6:52 PM To: montgomery_boats(a)mailman.xmission.com Subject: M_Boats: cockpit drain backwash That's brilliant! Now I have to know if it WOULD work on the 17! ----- Original Message ----- From: <Wcpritchett(a)aol.com> To: <montgomery_boats(a)mailman.xmission.com> Sent: Thursday, April 25, 2002 12:06 PM Subject: cockpit drain backwash I don't know if this will work on the M17 but bigger boats have the cockpit drain hoses crossed over to the opposite side. The boat has to be deep enough to locate them below the max heel angle. This keeps them from backing up when heeled. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

1 0

Re: M_Boats: Tongue Weight
by Stephen Yingst 26 Apr '02

26 Apr '02

You know, I've been pulling my Montgomery 17 "Flight" for about six years now. The boat, trailer and assorted cargotta weigh in at about 2200#. I first towed it with a Subaru Outback with a five speed; it was in this car that my wife and I got considerable experience in how to smoke a clutch at the boatramp. After 16000 miles the clutch and flywheel were toasted. I've been towing for a couple of years now with a small pickup with a 3L v6 (Mazda B3000, Ford Ranger) and it handles the weight just fine. If it were much heavier I would opt for trailer brakes, but I've had no problems to speak of (excepting the time that the boat and trailer got loose from my truck (at 45 mph)on the busy transition between two clogged freeways). >>> chonshell(a)ia4u.net 04/25/02 06:58PM >>> Thanks, Harvey: That reminds me of another question I wanted to ask. What is the consensus on towing with an automatic, rather than a standard, transmission? Seems to me, a standard would be a challenge on a slick boat ramp, however, standard transmissions are cheaper to buy, cheaper to fix and better on gas mileage. Anyone? Also, I broached the same tongue-weight question in a different way last year and remember someone saying something about adding a transmission cooler: Would anyone recommend this modification to a tow vehicle and, if so, is it an expensive ddition? --Craig ----- Original Message ----- From: "Harvey Wilson" <HarveyWilson(a)compuserve.com> To: <montgomery_boats(a)mailman.xmission.com> Sent: Thursday, April 25, 2002 8:09 PM Subject: Tongue Weight I pulled my M-17 with a Ford Aerostar 3L auto. I doubt that boat and trailer weigh more then 2500 lbs, unless it's carrying a lot of entra gear. Mine had an 8hp Evinrude, and it trailered sweet all the way from Ft. Myers, Fla. to Atlanta, Ga Harvey/Ga M-17 Stargazer #294 _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

1 0

cockpit drain
by Mark Pavuk 26 Apr '02

26 Apr '02

Is it normal to have water entering the cockpit from the drain? We sailed today and had a wonderful time - the only problem was a bit of water getting splashed up and getting our feet and the main sheet wet. I assumed self-bailing was a one way street somehow. Are we missing something? Cherri, M-15 # 322

9 13

Re: M_Boats: new M15 owner
by Harvey Hochstetter 26 Apr '02

26 Apr '02

Welcome Charles, glad you found such a "cute boat". You will find that it is not only cute, but carries with it a whole "big boat" aura. If you are looking for a place to go July 12-14, (and it's closer than Baja and Puget Sound,) come to Lake Pend Orielle, north Idaho. the NWPotters are going to be there and there will be at least one and hopefully several of the NW Montgomery owners and their boats there too. There are several in the area. Since we are fairly new to the M-15 and this group we are hoping to get to meet some new friends there. Happy Sails to You, Harvey & Deena H M-15 #348 Pelican Walla Walla, WA >>> cwfowlkes(a)imt.net 04/23/02 08:42PM >>> I was lucky to purchase a 1985 M15 with Ivory hull with Green trim last week when I was in California. It is in great shape but I am making "improvements" such as removing the bow pulpit which I did not feel I needed. As soon as the weather warms I will fill the holes; it snowed a little today in Bozeman. In the rudder I noticed a loose pin on the rod connecting the tiller to the rudder blade. To get to the pin I had to dis-assemble the rudder. This took some pounding due to corrosion between the stainless bolts and the aluminum spacers. I plan to refinish the aluminum cheeks as soon as I can find some Zinc Chromate primer in my little town. Think I will put some anti-seizing compound on the bolts when I put it back together, that is if I can remember where all the parts go! I am thinking about cutting out the well in the starboard locker to get access to that space. There were about five loose blocks of Styrofoam in this space, each about the size of a shoe box. Is this extra floatation needed? After some minor rigging changes and painting the trailer and finding some new tires I should be ready to head for the water. We DO have some lakes in Montana but they are frozen part of the year. I have trailed other boats to Puget Sound, Baja, and the Florida Keys. Am not sure what we will do with the M15 but it sure is cute! Thanks to the encouragement of several members of this group. Charless Fowlkes Bozeman, MT _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

2 1

Re: M_Boats: Mast Crutch
by Conbert H Benneck 26 Apr '02

26 Apr '02

Hi Deena and Harvey, On my M15 I had to build a new wooden aft mast support which fits into the gudgeons. The one that came with the boat was an old tired 2 x 4 that was fine for a delivery trip (Panama City, FL to Connecticut), but was much too scruffy for me to use with my lovely new toy. So, I built a new one that was made out of a nice piece of pine with a marine plywood mast holder at the top, and is varnished. - an artistic creation, if I do say so myself. It is held in the gudgeons and supports the aft end of the mast in storage and while on the road. (with winter cover; snow loads; etc.) The forward end of the mast is held by the steel tube on the trailer that also holds the winch. You don't have to worry about the weight of the mast on the gudgeons. Assume the mast weighs 30 lbs. One half the weight is carried by the forward mount; the rest by the aft mount; i.e., all the aft mount is holding is 15 lbs. (and with winter cover and snow loads, mine held a lot more) That is about what the rudder/tiller weighs. So, you really have a non-worry. Connie ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/.

2 1

Re: M_Boats: Tongue Weight
by Sandyal55＠aol.com 26 Apr '02

26 Apr '02

In a message dated 04/26/2002 3:38:22 AM !!!First Boot!!!, bobo4u(a)qwest.net writes: > Any trailer and boat combo weighing over 1500 lbs > (maybe less) should utilize trailer brakes. Idealy, the tow vehicle > should weigh twice the payload being towed. > I presume you are talking about a small boat like the 15. My old Aquarious 23 weighed 4000 lbs and Lenny's M 23 weighs 5800 lbs. Finding a vehicle with twice those weights is impossible. We use Ford trucks with the HD option (1 ton brakes and wheels and hubs). The new automatics in any pickup (even small trucks) is made to tow some modest weight. A trans cooler is a great idea to tow anything. Here in AZ, it's good to have a cooler on any automatic, even if you don't tow. I'd never tow any great distance with a front wheel drive vehicle. Those automatics are light duty and won't take the punishment. Sandy

1 0

RE: M_Boats: Mast Crutch
by Harvey Hochstetter 26 Apr '02

26 Apr '02

Giles, My M-15 came with a stainless steel tubing mast crutch that is approx 36" long and sits in the rudder gudgeons and supports the mast in a parallel attitude, (with the mast base riding on top of the winch tower.) It fits into a 9 foot high shop door with room to spare. I doubt that I could bend the crutch without really trying, it feels pretty hefty. I wonder about (1)transporting the mast with all the weight on the gudgeons, and (2) transporting with the mast half on the trailer and half on the boat. Sorry for the delay in getting back to this thread, things have been busy. Harvey & Deena H M-15 #348 PELICAN Walla Walla, WA >>> giles.morris(a)unisys.com 04/23/02 07:35AM >>> >I'm kinda skeptical about the two position crutch because moving the crutch to the >"high" position would be more work than just lifting the mast in the first place I have a metal tubing mast crutch that has two positions, and find it rather useful. The mast on the 15 is so light that it isn't so much lifting the weight as a matter of crowd control -- getting the mast into a convenient position with fewer things wrapped around it. BTW: I'm not happy with the tubing. It tends to bend, and when I get round to it I'm thinking of making something heavily influenced by a 2x4. Giles Morris Arlington VA Vancouver 25 "Dolphin" Montgomery 15 "Umiaq" Sundry small craft _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

1 0

Re: M_Boats: Tongue Weight
by Bob Olson 26 Apr '02

26 Apr '02

The towing debate ... er, discussion -- my favorite M-boat topic! Here's what I've gleaned from past discussions; If your pulling an M-15 (about 1200 lbs), you can pull it with just about anything. Someone on the list even pulls it with thier Golf GTI, auto. I bought a cheap mini truck to pull mine -- a '92 Nissan with a 5 speed, 2.4 litre engine, 2 wheel drive (indestructable). Light weight trucks with smaller engines like mine will pull more with a standard transmission. The auto transmissions are too light weight for heavy pulling. And I have yet to meet a boat ramp that I couldn't conquer. In bigger vehicles, say, 3.0 litre and above, the auto transmissions installed are heavy duty and can typically pull more than standard 5 speeds. Of course, if you have a 4WD with a low first gear, then a manual transmission will work fine and its simply a matter of preference. And last, but not least, is the all important statement about being able to stop [quickly]. Any trailer and boat combo weighing over 1500 lbs (maybe less) should utilize trailer brakes. Idealy, the tow vehicle should weigh twice the payload being towed. Is that about right? Bob Olson M-15 #296 "Piccolo" > >Thanks, Harvey: That reminds me of another question I wanted to ask. What >is the consensus on towing with an automatic, rather than a standard, >transmission? Seems to me, a standard would be a challenge on a slick boat >ramp, however, standard transmissions are cheaper to buy, cheaper to fix and >better on gas mileage. Anyone? Also, I broached the same tongue-weight >question in a different way last year and remember someone saying something >about adding a transmission cooler: Would anyone recommend this >modification to a tow vehicle and, if so, is it an expensive >ddition? --Craig > >----- Original Message ----- >From: "Harvey Wilson" <HarveyWilson(a)compuserve.com> >To: <montgomery_boats(a)mailman.xmission.com> >Sent: Thursday, April 25, 2002 8:09 PM >Subject: Tongue Weight > > >I pulled my M-17 with a Ford Aerostar 3L auto. > >I doubt that boat and trailer weigh more then 2500 lbs, unless it's >carrying a lot of entra gear. > >Mine had an 8hp Evinrude, and it trailered sweet all the way from Ft. >Myers, Fla. to Atlanta, Ga > > Harvey/Ga > >M-17 Stargazer #294 > > > >_______________________________________________ >http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats >

2 1

M17 drain problems
by Michael & Lizabeth Towers 26 Apr '02

26 Apr '02

My solution to water backing up through the cockpit drain in my '76 M17 is a short piece of hose, slightly smaller than the drain, wrapped with duct tape for a snug fit. Jam the hose into the drain so a a couple of inches sticks out. This keeps water off the cockpit sole unless you're REALLY stern heavy, and, if you forget to pull it, you'll only get a couple of inches of water standing before it starts to drain. Michael Towers M17 #226

1 0