- USR-TC - mailman.xmission.com

Callback on HiPer
by alex 20 Aug '03

20 Aug '03

I have chassis with HiPer ARC (5.3.3), HiPer DSP E1/PRI (3.5.13). I want to do callback on that TC. Callback is enabled on HiPer ARC (enable ppp negotiated_callback), interfaces are TWO_WAY. On radius there is user with Service-type Callback-Framed, Callback-Number xxxxxx, and all other attributes for network user. After calling this TC, callback is negotiated and TC calls me back, but my modem can't hear TC side modem. Where is problem? Can anybody help?

1 0

FS: MultiSpan Bundle
by Stephen Rivera - WRCA.Net 19 Aug '03

19 Aug '03

Chassis with Dual 130A power (New in Box Condition) 333NMC ARCII MultiSpan96 $8500.00 also have spare 4 multispan cards to sell. will consider separating bundle for individual card sales. ********************************************************************* Steve Rivera IM: srivera711 (877)WRCANET x102 for more product info got www.wrca.net WRCA , Inc. - 481 Wright Debow Rd. Jackson, NJ 08527

1 0

by SW Data 19 Aug '03

19 Aug '03

Test! Shannan Young SouthWest Data Technology, Inc. 972-739-7010 972-739-7013 (Fax) sky1(a)airmail.net www.swdt.com

1 0

What's going on with using filters?
by Scott Trautman 19 Aug '03

19 Aug '03

I just don't know what the deal with filters is - not working - not being applied - the're there - they're okay - did work -- - I have no RADIUS assignment of filters apparently - even though this has worked fine in the past: username Crypt-Password = "AFdhSOgvV6sns" Framed-Filter-Id = std I look at the interfaces, and dammit, filter_access is OFF - even though I've done set modem_groups all filter_access on ... okay fine, so now filter_access is on - great - (That maybe is a separate thing as to why filter_access would go to false on every one of my ARC's -) Then from the HiperARC console, I see: At 21:15:35, Facility "Filter Manager Process", Level "COMMON":: FM: No RADIUS rules available for user_handle=25e04f, status=554d650c And, truly, no input or output filter is applied for anyone. All the filters check out - HiPer>> list filter FILTERS Filter Name Status Protocols std.in NORMAL IP std.out NORMAL IP adult.in NORMAL IP virus.in NORMAL IP adult.out NORMAL IP virus.out NORMAL IP We're using HiperARC 5.3.3 - What the heck is going on? Anyone have any ideas on where to start? Thanks! Scott Trautman President/Owner www.gdinet.com Global Dialog Internet 608-240-4638,7fax 2049 Skaalen Road scott(a)gdinet.com Stoughton WI 53589 Internet Service across Southern Wisconsin

1 0

What is going on with filters?
by Scott Trautman 19 Aug '03

19 Aug '03

I just don't know what the deal with filters is - not working - not being applied - the're there - they're okay - did work -- - I have no RADIUS assignment of filters apparently - even though this has worked fine in the past: username Crypt-Password = "AFdhSOgvV6sns" Framed-Filter-Id = std I look at the interfaces, and dammit, filter_access is OFF - even though I've done set modem_groups all filter_access on ... okay fine, so now filter_access is on - great - (That maybe is a separate thing as to why filter_access would go to false on every one of my ARC's -) Then from the HiperARC console, I see: At 21:15:35, Facility "Filter Manager Process", Level "COMMON":: FM: No RADIUS rules available for user_handle=25e04f, status=554d650c And, truly, no input or output filter is applied for anyone. All the filters check out - HiPer>> list filter FILTERS Filter Name Status Protocols std.in NORMAL IP std.out NORMAL IP adult.in NORMAL IP virus.in NORMAL IP adult.out NORMAL IP virus.out NORMAL IP std-nowin.in NORMAL IP std-nowin.out NORMAL IP We're using HiperARC 5.3.3 - What the heck is going on? Anyone have any ideas on where to start? Thanks! SMT Scott Trautman President/Owner www.gdinet.com Global Dialog Internet 608-240-4638,7fax 2049 Skaalen Road scott(a)gdinet.com Stoughton WI 53589 Internet Service across Southern Wisconsin

2 1

HiPER DSP NAC Cards Not being Picked Up
by ISN Support Staff 18 Aug '03

18 Aug '03

Hello, I've got a Total Control HiPER system (4 HiPER DSP modem sets, 2 HiPER ARCs and the NMC) Unfortunately, neither TCM nor the list chassis command in the HiPER ARC CLI can detect the back DSP cards. The cards do seem to be working, as the front cards show up in TCM and the span lights are lit, so the front card can see the back card. Anyone got any ideas?

1 0

user connection speeds
by Vincent Jordan 18 Aug '03

18 Aug '03

Im using a 3com TC with netserver and quad digital modems. >From my desktop I am lucky if I can get 26k, but if I were to connect to another isp They use TC 1000 ( 4 t1 per card I believe ) I get 48-52k Is there an init string I can set in my rack to help or am I "sol"??

1 0

R2 and ISDN connections on 3COM
by Nyagitari Bosire 17 Aug '03

17 Aug '03

Hallos, I have an interesting problem here. Am running a dial-up set-up on a 3COM Total Control NAS, with HiperARC ver 5.0.9 and HiperDSP 3.5.13 (ISDN) and HiperDSP E1R2 ver 2.1.9. The situation is when I connect with to the ISDN line speed of 31kbps are achieved. The R2 line rings busy with as few as 5 calls terminated but can achieve connection speeds of up to 50Kbps. Anyone with an idea? Regards, Nyagitari Bosire Technical Operations

1 0

harm2206.zip
by Travis M. Best 12 Aug '03

12 Aug '03

If anyone has harm2206.zip and willing to share pleae email me direct tbest(a)ibcweb.net -- This message has been scanned for viruses and dangerous content by SunQwest MailScanner, and is believed to be clean.

1 0

Quad to DSP problem
by alex 12 Aug '03

12 Aug '03

Several days ago I have changed my analog phone lines to an E1 (was connected to Quads, now to HDSPs TCS4.5). Some users were connecting to analog TC using their mobile phones like Siemens SL45 (with internal modem). This is written in SL45's manual (for modem): Modem driver: Conforms to the V.25 command set. Speed: Conforms to ITU-T standard V.22bis (2400, 4800 and 9600 bit/s). Now my problem is that this users cant connect to digital TC. How can I set up this protocols on DSPs? Thanks, alex.

1 0