December 1999 - USR-TC - mailman.xmission.com

RE: (usr-tc) Recommended ip pool size.
by Stainforth, Matthew 21 Dec '99

21 Dec '99

For NetServers they recommended having a few extra addresses in the pool due to leakage but I'm told the ARCs don't have this problem. If 23 trunks are all you have then 23 addresses should do it. Matthew Stainforth || Technical Services Manager || BrunNet Inc. > -----Original Message----- > From: Jason P. [mailto:jjperc@petronet.net] > Sent: Monday, December 20, 1999 1:16 PM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) Recommended ip pool size. > > > We have a HiperARC chassis with PRI service. Can anyone give me a > suggestion on what the recommended ip pool size would be for one PRI > span (23 modems)? I haven't been able to find this info > anywhere in any > documentation. > > Thanks in advance. > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) Total Control Problem
by Stainforth, Matthew 20 Dec '99

20 Dec '99

for CT1 check and make sure you have the DS0->modem mapping set up correctly for PRI check your PRI Configuration and set the modem call routing method appropriately (FirstAvailable or RoundRobin would probably be simplest for you in this case). Then make sure all your modems are configured the same as one of your working modems...I use the "load from" function to make life easier. Matthew Stainforth || Technical Services Manager || BrunNet Inc. > -----Original Message----- > From: meijin(a)vvm.com [mailto:meijin@vvm.com] > Sent: Monday, December 20, 1999 11:59 AM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) Total Control Problem > > > I picked up a used Total Control unit with a total of like 48 > modems in it. > The first modem card (with 4 modems) in it will all answer > calls, but none > of the other modems will get calls. Can anyone familiar with this unit > think of something I might have missed or that I can check to > see what the > deal is? > > Thanks! > > Michael > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) S&A Server Y2K issues
by K Mitchell 20 Dec '99

20 Dec '99

Couple of questions regarding this, the box is NT4/SP5; -Are there any known issues relating to S&A Server 6.0.90 running on Access 98? -What effect would upgrading to Access 2000 have on S&A Server? Thanks, -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Total Control Problem
by meijin＠vvm.com 20 Dec '99

20 Dec '99

I picked up a used Total Control unit with a total of like 48 modems in it. The first modem card (with 4 modems) in it will all answer calls, but none of the other modems will get calls. Can anyone familiar with this unit think of something I might have missed or that I can check to see what the deal is? Thanks! Michael - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Total Control Problem
by meijin＠vvm.com 20 Dec '99

20 Dec '99

I picked up a used Total Control unit with a total of like 48 modems in it. The first modem card (with 4 modems) in it will all answer calls, but none of the other modems will get calls. Can anyone familiar with this unit think of something I might have missed or that I can check to see what the deal is? Thanks! Michael - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) HiperDSP Hardware revision 0.55.0
by System Administrator 18 Dec '99

18 Dec '99

Pardon the sarcasm, but I'm on my 16th hour without a break, the day (morning) before my vacation...... Receive new chassis - NMC, HARC, x2DSP's. Receive new x2 DSP's (DoublePlay). Swap out old Ascend Max 4048 with new chassis. I have two C-T1's in the chassis now, one DSP extra for when the new C-T1 gets there. Of the three DSP's, only one works reliably, the other two reboot intermittently. Since I have my handy-dandy 3Com support contract, I call the tech line. I explain the problem, the tech on call asks what software I have running. I reply 2.0.60. Tech says, "that's good, what hardware revision of DSP's do you have?" I reply 0.55.0. Tech says "Uh-oh". I get nervous.... Tech states that there have been problems with HR 0.55.0. Recommends switching to the spare card (also 0.55.0). I do that, and 5 minutes later the card reboots. Now I wait until the new cards come in. If anyone has any input into this situation, please email me personally, and cc jokerman(a)nebi.com - he's filling in for me starting tomorrow. Otherwise, make sure you test those DSP's!!!! __________________________________ Justin Ellison System Administrator InternetUSA sysadmin(a)nebi.com http://nebi.com 800-603-3502 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 7

RE: (usr-tc) Auto answer
by Terry Kennedy 18 Dec '99

18 Dec '99

Don't open this guys... -----Original Message----- From: usr-tc(a)lists.xmission.com [mailto:usr-tc@lists.xmission.com] Sent: Friday, December 17, 1999 9:28 AM To: terry(a)olypen.com Subject: (usr-tc) Auto answer http://stuart.messagemates.com/index.html Hypercool Happy New Year 2000 funny programs and animations... We attached our recent animation from this site in our mail ! Check it out !

1 0

(usr-tc) Bad HiperDSPs with Alliance Chips? (fwd)
by drernst＠kirkwood.hoosier.net 17 Dec '99

17 Dec '99

I tried to send this message on Monday, but I'm afraid that the mail address I used doesn't match the one I signed up to the list with, so it's probably awaiting approval or something. Anyway, I'm sending from what I believe is the right "From" now, so hopefully it will go through, because it seems to be affecting others too. At the very least, I hope it reaches you folks at nebi.com... David Ernst HoosierNet, Inc. PS, our new cards are supposed to be here today. But there's apparently a software fix as well... ---------- Forwarded message ---------- Date: Mon, 13 Dec 1999 18:32:48 -0500 (EST) From: David Ernst <drernst(a)bloomington.in.us> To: usr-tc(a)lists.xmission.com Subject: Bad HiperDSPs with Alliance Chips? We just tried to bring up a couple of new HiperDSP cards. Connections on them were extremely unstable (I couldn't get one to last more than 5 minutes, some were connected longer than that, but there were clearly problems). I called technical support at Source Technology, from whom we purchased the cards. Before I even finished describing the problem, they started talking about a defective batch of cards that came off the line recently. The affected cards are apparently hardware revision 0.55 and (this is key apparently) have two pairs of chips on the reverse side of the card, mounted horizontally, made by "Alliance". Our cards matched their description to a "T", and they told us to send the cards back and they would ship us a new one as soon as they could. Since these Alliance folks apparently supply ships for about 20% of the cards 3Com produces, there is a substantial demand for replacement cards. So meanwhile, we'll wait for Source Technology to come back with new cards, and try to explain to our users why the busy signals didn't go away when we thought they would. <Sigh> Anyone else heard about this? Can anyone from 3Com confirm or deny this problem? David - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Stuck Modem fix
by Brian 17 Dec '99

17 Dec '99

Does anyone know if 3Com is reasonably close to having a fix available for the DSP's that lockup in pairs? Brian ----------------------------------------------------- Brian Feeny (BF304) signal(a)shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) Stuck Modem fix
by Stainforth, Matthew 17 Dec '99

17 Dec '99

I haven't had a problem with it since I rolled out 2.0.60 on the HDSPs. Matthew Stainforth || Technical Services Manager || BrunNet Inc. > -----Original Message----- > From: Brian [mailto:signal@shreve.net] > Sent: Friday, December 17, 1999 10:16 AM > To: USRobotics TC Mailing List > Subject: (usr-tc) Stuck Modem fix > > > > Does anyone know if 3Com is reasonably close to having a fix > available for > the DSP's that lockup in pairs? > > Brian > > > ----------------------------------------------------- > Brian Feeny (BF304) signal(a)shreve.net > 318-222-2638 x 109 http://www.shreve.net/~signal > Network Administrator ShreveNet Inc. (ASN 11881) > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0