December 1999 - USR-TC - mailman.xmission.com

Re: (usr-tc) OID for HiperDSP -Reply -Reply
by Campbell Simpson 01 Dec '99

01 Dec '99

Paul You should have the usrCip MIB (1.3.6.1.4.1.429.4.10). Originally we had to do a walk of the NMC card to find the number of active sessions, but we asked our vendor for some development so that we could just perform one snmp get for the total number of active sessions on a NAS or on a DSP card. Apparently here in NZ we get slightly different software releases to others. If you don't have the MIB then have a talk to your vendor and see what they say. Campbell - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) OID for HiperDSP
by Stainforth, Matthew 01 Dec '99

01 Dec '99

Actually it's the HARC rather than the NMC.... > -----Original Message----- > From: farber(a)admin.f-tech.net [mailto:farber@admin.f-tech.net] > Sent: Tuesday, November 30, 1999 5:30 PM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) OID for HiperDSP > > > It would depend on the NMC card more than the modem type. > Since yo unever > query the quad/dsp via snmp.... only the NMC card. > > Paul Farber > Farber Technology > farber(a)admin.f-tech.net > Ph 570-628-5303 > Fax 570-628-5545 > > On Tue, 30 Nov 1999, K Mitchell wrote: > > > At 12:06 PM 11/30/99 -0300, Jose Luis Gaspoz > <josega(a)ssdfe.com.ar> wrote: > > >Does somebody know the OID to see the quantity of users > connected in a > > >HiperDSP? > > > > Using 1.3.6.1.4.1.429.4.2.1.10.0 here, but I've only got > ARC/DSPs, so I > > don't know how it will interact with the quads. > > > > > > -- > > Kirk Mitchell-General Manager mitch(a)keyconn.net > > Keystone Connect Unlock Your World > > Altoona, PA 814-941-5000 http://www.keyconn.net > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old > messages send > > "help" to the same address. Do not use quotes in your message. > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 4

(usr-tc) OID for HiperDSP -Reply
by Campbell Simpson 01 Dec '99

01 Dec '99

Jose We have HiPer DSPs and use the OID 1.3.6.1.4.1.429.4.10.36.0 on the ARC card that will return a single value for the number of active ports in a chassis. There are other OIDs around this value that will give you a per DSP card count, if you have the correct version of ARC code (4.1.50) Hope this helps Campbell - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) OID for HiperDSP -Reply
by Campbell Simpson 01 Dec '99

01 Dec '99

Jose We have HiPer DSPs and use the OID 1.3.6.1.4.1.429.4.10.36.0 on the ARC card that will return a single value for the number of active ports in a chassis. There are other OIDs around this value that will give you a per DSP card count, if you have the correct version of ARC code (4.1.50) Hope this helps Campbell - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) OID for HiperDSP
by Stainforth, Matthew 01 Dec '99

01 Dec '99

yes...but the OID mentioned previously, that is valid for the HARC, not the NMC > -----Original Message----- > From: farber(a)admin.f-tech.net [SMTP:farber@admin.f-tech.net] > Sent: Tuesday, November 30, 1999 5:59 PM > To: 'usr-tc(a)lists.xmission.com' > Subject: RE: (usr-tc) OID for HiperDSP > > depends on what you're looking for. Modem stat's are returned via the > NMC, user information via the ARC. You could get a list of users, and > count them or you could query the NMC for a modem's status (off hook, > connect speed, etc). > > > Paul Farber > Farber Technology > farber(a)admin.f-tech.net > Ph 570-628-5303 > Fax 570-628-5545 > > On Tue, 30 Nov 1999, Stainforth, Matthew wrote: > > > > > Actually it's the HARC rather than the NMC.... > > > > > -----Original Message----- > > > From: farber(a)admin.f-tech.net [mailto:farber@admin.f-tech.net] > > > Sent: Tuesday, November 30, 1999 5:30 PM > > > To: usr-tc(a)lists.xmission.com > > > Subject: Re: (usr-tc) OID for HiperDSP > > > > > > > > > It would depend on the NMC card more than the modem type. > > > Since yo unever > > > query the quad/dsp via snmp.... only the NMC card. > > > > > > Paul Farber > > > Farber Technology > > > farber(a)admin.f-tech.net > > > Ph 570-628-5303 > > > Fax 570-628-5545 > > > > > > On Tue, 30 Nov 1999, K Mitchell wrote: > > > > > > > At 12:06 PM 11/30/99 -0300, Jose Luis Gaspoz > > > <josega(a)ssdfe.com.ar> wrote: > > > > >Does somebody know the OID to see the quantity of users > > > connected in a > > > > >HiperDSP? > > > > > > > > Using 1.3.6.1.4.1.429.4.2.1.10.0 here, but I've only got > > > ARC/DSPs, so I > > > > don't know how it will interact with the quads. > > > > > > > > > > > > -- > > > > Kirk Mitchell-General Manager mitch(a)keyconn.net > > > > Keystone Connect Unlock Your World > > > > Altoona, PA 814-941-5000 http://www.keyconn.net > > > > > > > > > > > > - > > > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > > > with "unsubscribe usr-tc" in the body of the message. > > > > For information on digests or retrieving files and old > > > messages send > > > > "help" to the same address. Do not use quotes in your message. > > > > > > > > > > > > > - > > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > > with "unsubscribe usr-tc" in the body of the message. > > > For information on digests or retrieving files and old messages send > > > "help" to the same address. Do not use quotes in your message. > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) HiPer Arc improvement thoughts followup :)
by ROC Services 01 Dec '99

01 Dec '99

On Thu, 16 Sep 1999, Mike Andrews wrote: [snip] > Multilink PPP got real slow in the last DSP releases and needs work again. This seems to still be a problem. HDSP 2.0.81 / HARC 4.2.32-1 We've got a customer who uses 4 channels of ISDN. We just moved them from a Livingston PM2 which is dying rapidly to our TC box on PRI. Since the move, throughput is way down, and I did a 'mon ppp' to see if I could see any reason why. On the 'mon ppp', we get a pretty even distribution among the user's four channels on inbound traffic. However, all outbound traffic seems to go out the same channel. Could this perhaps explain something, or does 'mon ppp' display outbound multilink packets incorrectly? Remote router is a Cisco 3620 running IOS 11.2(11), which until earlier this week was performing much better connected to the PM2. Any input would be appreciated, and I'll be happy to work with anyone who wants to look into this, test code, etc. I have not tried 2.0.60, but I don't see anything about multilink in its release notes. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2