- montgomery_boats - mailman.xmission.com

Launching on Lake Union
by Peter Zimowsky 04 Feb '22

04 Feb '22

Hi folks: Each year I sail Lake Union, renting a boat from the Center for Wooden boats. I love those boats. However, my bucket list includes sailing my M 15 (sail 377) on the lake. Where is the best boat ramp as far as access, parking and safety. Thanks, Pete WinterSky (Zimowsky) San Juan Islander lost inland - an old salty stuck in the sagebrush outdoors writer and photographer Facebook: https://www.facebook.com/pzimowsky Twitter: @zimosoutdoors The Northwest Outdoors Journey: https://outdoorsnorthwest.home.blog/2019/03/13/the-journey-begins/ "We Can Not Control the Wind But We Can Adjust Our Sails"

1 0

1/12/22 Recommendation re: ballast quantity to purchase
by tdelacy＠wavecable.com 21 Jan '22

21 Jan '22

Gentlemen, 1. I have started the repair process of my cracked shoal keel by removing the steel punchings. 2. Dave Scoobie visited the other night and suggested I ask Jerry for the weight of ballast to purchase. a. Hull # MMP 173320981. 3. So far I have pulled out most of the steel punchings. a. Just shy of 300 lbs. b. There is a lot steel punchings that just went everywhere, not sure if was 10% of what I have removed everywhere though. c. The remainder in the keel will probably take a week or more to chase out. The solidified oxidized stuff just doesn't want to leave the boat. 4. I have the day off Friday and a local source of reclaimed range lead shot #7 to #9 that will provide me the weight I need (500 lbs is possible). a. If possible would like to purchase all the lead I need. b. No worries, if I don't hear from anyone prior to Friday, between excavating the stubborn steel ballast pockets and figuring out how to cast resin lead bricks, I'll have opportunities to purchase additional lead in the future. Thank you, Tim de Lacy -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

6 11

M15 stern light
by Jim Sadler 16 Jan '22

16 Jan '22

Any reason stern light can't be mounted low on the mast or on the cabin top? ( other than interpretation of rules). From a dist I doubt. If the position could be distinguished between mast cabin top or stern. Much easier to wire and Bristol Capt Jim SV Pelican Get Outlook for iOS<https://aka.ms/o0ukef>

4 6

M23 for Sale Navy Hull
by Josh Bloom 16 Jan '22

16 Jan '22

Can you post boat for sale on here? Please advise. If so I have one so I can buy another boat ;) Sent from my iPhone Josh Bloom Principal Bloom Commercial Real Estate “BCRE” Sales, Leasing, Tenant Representation, Development We’ve Moved – New Address below 10050 Crosstown Circle | Suite <x-apple-data-detectors://1> 600 Eden Prairie, MN 55344<x-apple-data-detectors://1> Map Directions<https://goo.gl/maps/oEMk1RdbZb4ajJuZ6> Cell or Text 651 207 3157<tel:651%20207%203157> for Josh Cell or Text 612-701-5151<tel:612-701-5151> for Tim <mailto:josh@bloomcommercial.com> View My Listings<http://www.bloomcommercial.com/index.html> josh(a)bloomcommercial.com<mailto:josh@bloomcommercial.com> www.bloomcommercial.com<file:///var/tmp/com.apple.email.maild/EMContentRepresentation/com.apple.mob…>

2 1

Re: montgomery_boats Digest, Vol 226, Issue 6
by Cap Keith 02 Jan '22

02 Jan '22

Hey all., this is just the best forum. Special thank you to John, Keith, Henry, and Dave for answering my questions about anchoring setup(s). You all provided a nice welcome, great pictures and thoughts that will help me with setting up or being confident in anchoring this fine vessel. I have been actively reading the other posts over the last few months and realize that one of the best benefits of owning a Montgomery is this forum. So, thank you, all very much. To answer a few questions that were asked of me: 1) my M17 is located in West Palm Beach, Fl. I also live in a small coastal town in Oregon, and sail in Newport Bay and offshore with my 18’ Pacaroon (Sam Rabl design). Do have ideas/plans to someday to get the Montgomery to the PNW… 2) The M17 that I own has the aluminum toe rail, (for sure. I won’t cut it). I want to keep the boat as original as possible. Anyway, thanks again. I look forward to keeping up to date with the others that post on this forum. It’s a pleasure. Keith Korporaal s/v Ginger Snap From: montgomery_boats-request(a)mailman.xmission.com <montgomery_boats-request(a)mailman.xmission.com> Date: Saturday, January 1, 2022 at 10:45 AM To: montgomery_boats(a)mailman.xmission.com <montgomery_boats(a)mailman.xmission.com> Subject: montgomery_boats Digest, Vol 226, Issue 6 Send montgomery_boats mailing list submissions to montgomery_boats(a)mailman.xmission.com To subscribe or unsubscribe via email, send a message with subject or body 'help' to montgomery_boats-request(a)mailman.xmission.com You can reach the person managing the list at montgomery_boats-owner(a)mailman.xmission.com When replying, please edit your Subject line so it is more specific than "Re: Contents of montgomery_boats digest..." Today's Topics: 1. Re: Anchoring setup on M17 (John Schinnerer) 2. Re: Anchoring setup on M17 (Henry Rodriguez) 3. Re: Anchoring setup on M17 (Keith R. Martin) 4. Re: Anchoring setup on M17 (Dave Scobie) ---------------------------------------------------------------------- Date: Fri, 31 Dec 2021 10:54:03 -0800 From: John Schinnerer <john(a)eco-living.net> Subject: M_Boats: Re: Anchoring setup on M17 To: montgomery_boats(a)mailman.xmission.com Message-ID: <2a6276ae-df6f-6fb7-3710-93fe21ee43fe(a)eco-living.net> Content-Type: text/plain; charset=windows-1252; format=flowed Congrats Keith and welcome to M17-land! My 1974 M17 has a large center-located bow cleat which is where I make fast the anchor rode. Being as old as it is, it also has the wonderful full length anodized aluminum toe rails which are very low-friction, so I have no separate chocks as the rode just slides over the toe rail. It is stopped from shifting much aft by the bow pulpit stanchion. Not sure when M17s changed from the aluminum to wood toe rails, which do you have? My anchor lives (so far anyhow) in the small starboard locker and not on the bow so no pulpit mount or bow roller etc. on mine. Keith M. has a whole customized bow roller/sprit setup, looks like Henry on "Monita" does also, you can see some of this on the MSOG photo site: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmsogphotosi… Happy new years' eve, John On 12/31/21 10:38 AM, Cap Keith wrote: > Hi all, > > I recently bought a 1980 Montgomery 17 and was trying to figure out the best way to setup the anchoring system. Not so much on types of anchors, but, more importantly how the bow is set to receive the anchor rode, there isn’t a Sampson post, or what I feel is proper or more functional chocks or bow roller (?). Can anyone provide what has worked best for them? > > Thank you! > Keith Korporaal > > > Get Outlook for iOS<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo…> > -- John Schinnerer - M.A., Whole Systems Design -------------------------------------------- - Eco-Living - Whole Systems Design Services People - Place - Learning - Integration john(a)eco-living.net - 510.982.1334 https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Feco-living.… https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fsociocracyc… ------------------------------ Date: Fri, 31 Dec 2021 14:30:08 -0600 From: Henry Rodriguez <heinzir(a)gmail.com> Subject: M_Boats: Re: Anchoring setup on M17 To: For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Message-ID: <CAMKG1hLtBg=eMBGmkuJP2WEXak_AzZhrmJM3qtqi62waupQN3A(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Hi Keith, Congratulations on your new boat. Where are you located? Here are some links to pics of my anchor rode set up and of the bowsprit I added for an anchor roller. https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmsogphotos… https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmsogphotos… Unfortunately there is a glitch in the msogphotosite program that is not allowing the thumbnail pictures in the Bowsprit post to show full size when clicked on. These mods are probably overkill for a boat as small as the M17 but they do keep me nautically occupied during our long Minnesota winters. Henry M17 Monita #310 On Fri, Dec 31, 2021 at 12:38 PM Cap Keith <orionkeith(a)msn.com> wrote: > Hi all, > > I recently bought a 1980 Montgomery 17 and was trying to figure out the > best way to setup the anchoring system. Not so much on types of anchors, > but, more importantly how the bow is set to receive the anchor rode, there > isn’t a Sampson post, or what I feel is proper or more functional chocks or > bow roller (?). Can anyone provide what has worked best for them? > > Thank you! > Keith Korporaal > > > Get Outlook for iOS<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo…> > -- Sent from Gmail Mobile ------------------------------ Date: Fri, 31 Dec 2021 14:00:40 -0800 From: "Keith R. Martin" <keith.richard.martin(a)gmail.com> Subject: M_Boats: Re: Anchoring setup on M17 To: For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Message-ID: <CAOQkDsyVT5Mvu-BUqDyvkFL-Y_vg6LDdvLdpRUG1HRsB3JNwVA(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Hello Keith, welcome to our community! I have equipped my 1982 M17 with a bow roller mounted anchor in a fashion that might be of interest to you... You can find some info on it here -> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.msogpho… Cheers Keith *Keith R. Martin* *Vancouver/Burnaby B.C.* *Serenity M17, #353* *https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.msogphotosite.com%2FScripts%2FBoats%2Fboatsdetail.php%3Fid%3D105&data=04%7C01%7C%7C0dbd548964e44d2b426b08d9cd3dbd50%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637766487342455793%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=hLO%2FOdpjq8DaMC1TcR8KMfI9fJzt2D9CxIlhiJ3cq5o%3D&reserved=0 <https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.msogpho…>* On Fri, 31 Dec 2021 at 10:38, Cap Keith <orionkeith(a)msn.com> wrote: > Hi all, > > I recently bought a 1980 Montgomery 17 and was trying to figure out the > best way to setup the anchoring system. Not so much on types of anchors, > but, more importantly how the bow is set to receive the anchor rode, there > isn’t a Sampson post, or what I feel is proper or more functional chocks or > bow roller (?). Can anyone provide what has worked best for them? > > Thank you! > Keith Korporaal > > > Get Outlook for iOS<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo…> > ------------------------------ Date: Sat, 1 Jan 2022 07:44:49 -0800 From: Dave Scobie <scoobscobie(a)gmail.com> Subject: M_Boats: Re: Anchoring setup on M17 To: For and about Montgomery Sailboats <montgomery_boats(a)mailman.xmission.com> Message-ID: <CAGjBOA54oYXzp7U+qeDqDR__Jh1H+e2e8UGEcMqV8adGyad83Q(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" My thoughts: Launch and retrieve the anchor from the cockpit. When anchor set walk rode to the bow. Store in the deep Port cockpit locker. Tie rode to the big cleat in the center of the foredeck. I assume your boat has aluminum toe rails. Run the rode over the toe rail. Chocks would nice nice but difficult to fit as you _do not_ want to remove, cut or damage the aluminum toe rails. :: Dave Scobie :: M6'8" #650 :: Baba 30 #233 DEJA VU :: SV SWALLOW - sv-swallow.com :: former owner M17 #375 SWEET PEA - m17-375.com :: former owner M15 #288 SCRED - m15namedscred.wordpress.com On Fri, Dec 31, 2021, 10:38 AM Cap Keith <orionkeith(a)msn.com> wrote: > Hi all, > > I recently bought a 1980 Montgomery 17 and was trying to figure out the > best way to setup the anchoring system. Not so much on types of anchors, > but, more importantly how the bow is set to receive the anchor rode, there > isn’t a Sampson post, or what I feel is proper or more functional chocks or > bow roller (?). Can anyone provide what has worked best for them? > > Thank you! > Keith Korporaal > > > Get Outlook for iOS<https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fo…> > ------------------------------ Subject: Digest Footer _______________________________________________ montgomery_boats mailing list -- montgomery_boats(a)mailman.xmission.com To unsubscribe send an email to montgomery_boats-leave(a)mailman.xmission.com %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s Remember, there is no privacy on the Internet! ------------------------------ End of montgomery_boats Digest, Vol 226, Issue 6 ************************************************

1 0

Chocks on my Montgomery 17s
by Bob Eeg 01 Jan '22

01 Jan '22

[cid:10398BB5-E130-41EC-A679-965B69989336] Sent from my iPad

1 0

Anchoring setup on M17
by Cap Keith 01 Jan '22

01 Jan '22

Hi all, I recently bought a 1980 Montgomery 17 and was trying to figure out the best way to setup the anchoring system. Not so much on types of anchors, but, more importantly how the bow is set to receive the anchor rode, there isn’t a Sampson post, or what I feel is proper or more functional chocks or bow roller (?). Can anyone provide what has worked best for them? Thank you! Keith Korporaal Get Outlook for iOS<https://aka.ms/o0ukef>

5 4

VHF Handheld
by brad kurlancheek 09 Dec '21

09 Dec '21

Santa gave me a Std Horizon HX-851 a few years ago. Comes with two rechargeable Li-Ion batteries, plus a third battery pack that takes a few AAA batteries. I figure that all gives me at least 30 hours of On time. I bring it along on mutli-day trips for emergencies, backup NOAA Wx, bridge openings, and if I need to hear conversation, there's always the chitchat amongst the commercial fisherman in the 60s channels. As someone else noted, the rudimentary GPS feature seems a bit unnecessary. - Brad

2 1

Handheld vhf
by Jim Sadler 06 Dec '21

06 Dec '21

What are you skippers using for handheld vhf? Merry Christmas skippers ? Capt Jim SV Pelican M 15 Get Outlook for iOS<https://aka.ms/o0ukef>

7 14

Keel surgery pics I saved
by John Schinnerer 23 Nov '21

23 Nov '21

Hi all, Re the keel surgery thread - found these in my stash of pics I've saved, often from posts on this list. Originals are too big to have been posted though so must have got them some other way. These should be small enough to post, if someone wants the full size images I can send direct to your email. Folder I saved them in is called "Jim Hymes keel surgery" and that's all I know other than what they show - portions of keel cut open and some removal of rusted steel-resin innards. HTH, John -- John Schinnerer - M.A., Whole Systems Design -------------------------------------------- - Eco-Living - Whole Systems Design Services People - Place - Learning - Integration john(a)eco-living.net - 510.982.1334 http://eco-living.net http://sociocracyconsulting.com

2 1