Check your Timeslots for Local/Remote Out of Service messages. It may also be that two timeslots are mapped [Timeslot Mapping and Blocking] to one Modem or something of that nature. -----Original Message----- From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Shahrooz Sharghi Sent: Tuesday, July 26, 2005 12:26 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: [USR-TC] Hiper DSP Hi all We have a tc1000 with this configuration: 1- NMC Card 2- Hiper Access router card 3- 1 E1 DSP ISDN Signaling Max users could connect to it are 29, never we don't have 30 online user together. After 29 online user they get Busy Tone. What do you think about this problem? Regards Shahrooz Sharghi
Do you have nmc chassis awareness enabled or do you have things setup manually on the arc? List chassis If you don't see the other 2 cards owned by your arc with the correct number of timeslots, etc that may be your problem. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Adam Barnhill Sent: Tuesday, July 26, 2005 2:16 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] Hiper DSP Check your Timeslots for Local/Remote Out of Service messages. It may also be that two timeslots are mapped [Timeslot Mapping and Blocking] to one Modem or something of that nature. -----Original Message----- From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Shahrooz Sharghi Sent: Tuesday, July 26, 2005 12:26 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: [USR-TC] Hiper DSP Hi all We have a tc1000 with this configuration: 1- NMC Card 2- Hiper Access router card 3- 1 E1 DSP ISDN Signaling Max users could connect to it are 29, never we don't have 30 online user together. After 29 online user they get Busy Tone. What do you think about this problem? Regards Shahrooz Sharghi
Messagehow I should check those? please send me related commands. ----- Original Message ----- From: Todd To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Sent: Tuesday, July 26, 2005 11:53 AM Subject: RE: [USR-TC] Hiper DSP Do you have nmc chassis awareness enabled or do you have things setup manually on the arc? List chassis If you don't see the other 2 cards owned by your arc with the correct number of timeslots, etc that may be your problem. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Adam Barnhill Sent: Tuesday, July 26, 2005 2:16 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] Hiper DSP Check your Timeslots for Local/Remote Out of Service messages. It may also be that two timeslots are mapped [Timeslot Mapping and Blocking] to one Modem or something of that nature. -----Original Message----- From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Shahrooz Sharghi Sent: Tuesday, July 26, 2005 12:26 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: [USR-TC] Hiper DSP Hi all We have a tc1000 with this configuration: 1- NMC Card 2- Hiper Access router card 3- 1 E1 DSP ISDN Signaling Max users could connect to it are 29, never we don't have 30 online user together. After 29 online user they get Busy Tone. What do you think about this problem? Regards Shahrooz Sharghi ------------------------------------------------------------------------------ _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
MessageWhere is nmc chassis awareness ? In TCM I can see in NMC settings: Auto config on Card Initialization = Disable We didn't set anything manually on Hiper ARC. The DSP have factory default setting. Best Regards Shahrooz Sharghi ----- Original Message ----- From: Todd To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Sent: Tuesday, July 26, 2005 11:53 AM Subject: RE: [USR-TC] Hiper DSP Do you have nmc chassis awareness enabled or do you have things setup manually on the arc? List chassis If you don't see the other 2 cards owned by your arc with the correct number of timeslots, etc that may be your problem. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Adam Barnhill Sent: Tuesday, July 26, 2005 2:16 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] Hiper DSP Check your Timeslots for Local/Remote Out of Service messages. It may also be that two timeslots are mapped [Timeslot Mapping and Blocking] to one Modem or something of that nature. -----Original Message----- From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Shahrooz Sharghi Sent: Tuesday, July 26, 2005 12:26 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: [USR-TC] Hiper DSP Hi all We have a tc1000 with this configuration: 1- NMC Card 2- Hiper Access router card 3- 1 E1 DSP ISDN Signaling Max users could connect to it are 29, never we don't have 30 online user together. After 29 online user they get Busy Tone. What do you think about this problem? Regards Shahrooz Sharghi ------------------------------------------------------------------------------ _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Copy and paste to the list what you get when you do a 'list chassis' command. For nmc settings do a 'show nmc settings' This is all done from the hiperarc. If you have more than 1 arc in the chassis you need to set things up on both arcs. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Shahrooz Sharghi Sent: Monday, August 01, 2005 11:47 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] Hiper DSP Where is nmc chassis awareness ? In TCM I can see in NMC settings: Auto config on Card Initialization = Disable We didn't set anything manually on Hiper ARC. The DSP have factory default setting. Best Regards Shahrooz Sharghi ----- Original Message ----- From: Todd <mailto:berto@core.com> To: 'Discussion relating to the <mailto:usr-tc@mailman.xmission.com> 3Com/US Robotics Total Controlmodemsystems.' Sent: Tuesday, July 26, 2005 11:53 AM Subject: RE: [USR-TC] Hiper DSP Do you have nmc chassis awareness enabled or do you have things setup manually on the arc? List chassis If you don't see the other 2 cards owned by your arc with the correct number of timeslots, etc that may be your problem. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Adam Barnhill Sent: Tuesday, July 26, 2005 2:16 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] Hiper DSP Check your Timeslots for Local/Remote Out of Service messages. It may also be that two timeslots are mapped [Timeslot Mapping and Blocking] to one Modem or something of that nature. -----Original Message----- From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Shahrooz Sharghi Sent: Tuesday, July 26, 2005 12:26 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: [USR-TC] Hiper DSP Hi all We have a tc1000 with this configuration: 1- NMC Card 2- Hiper Access router card 3- 1 E1 DSP ISDN Signaling Max users could connect to it are 29, never we don't have 30 online user together. After 29 online user they get Busy Tone. What do you think about this problem? Regards Shahrooz Sharghi _____ _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
MessageSorry for mistake in sendind wrong attached file in my previous email. HiPer>> HiPer>> SHOW NMC SETTINGS NMC SETTINGS Chassis Awareness: ENABLED Dynamic Slot Assignment: DISABLED DSA Idle Rebalancing: ENABLED SNMP Forwarding: ENABLED HiPer>> ------------------------------------------------------------------------------------------------------------- HiPer>> list chasSIS Slot Owner Description Ports Type Console 1 YES 30 Channel High Density Modem 30 DYNAMIC YES 2 YES --EMPTY-- 0 STATIC NO 3 YES --EMPTY-- 0 STATIC NO 4 YES --EMPTY-- 0 STATIC NO 5 YES --EMPTY-- 0 STATIC NO 6 YES --EMPTY-- 0 STATIC NO 7 YES --EMPTY-- 0 STATIC NO 8 YES --EMPTY-- 0 STATIC NO 9 YES --EMPTY-- 0 STATIC NO 10 YES --EMPTY-- 0 STATIC NO 11 YES --EMPTY-- 0 STATIC NO 12 YES --EMPTY-- 0 STATIC NO 13 YES --EMPTY-- 0 STATIC NO 14 YES --EMPTY-- 0 STATIC NO 15 YES --EMPTY-- 0 STATIC NO 16 YES HiPer Access Router NAC 0 DYNAMIC NO HiPer>> ---------------------------------------------------------------------------------------------------------------------------- list inteRFACES INTERFACES Interface Oper Admin Name Status Status SLOT:1/CON:1 Up Up eth:1 Up Up eth:2 Down Up internal Up Up loopback Up Up slot:1/mod:1 Up Up slot:1/mod:2 Up Up slot:1/mod:3 Up Up slot:1/mod:4 Up Up slot:1/mod:5 Up Up slot:1/mod:6 Up Up slot:1/mod:7 Up Up slot:1/mod:8 Up Up slot:1/mod:9 Up Up slot:1/mod:10 Up Up slot:1/mod:11 Up Up slot:1/mod:12 Up Up slot:1/mod:13 Up Up slot:1/mod:14 Up Up slot:1/mod:15 Up Up slot:1/mod:16 Up Up slot:1/mod:17 Up Up slot:1/mod:18 Up Up slot:1/mod:19 Up Up slot:1/mod:20 Up Up slot:1/mod:21 Up Up slot:1/mod:22 Up Up slot:1/mod:23 Up Up slot:1/mod:24 Up Up slot:1/mod:25 Up Up slot:1/mod:26 Up Up slot:1/mod:27 Up Up slot:1/mod:28 Up Up slot:1/mod:29 Up Up slot:1/mod:30 Up Up HiPer>> ----- Original Message ----- From: Todd Bertolozzi To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Sent: Monday, August 01, 2005 10:38 AM Subject: RE: [USR-TC] Hiper DSP Copy and paste to the list what you get when you do a 'list chassis' command. For nmc settings do a 'show nmc settings' This is all done from the hiperarc. If you have more than 1 arc in the chassis you need to set things up on both arcs. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Shahrooz Sharghi Sent: Monday, August 01, 2005 11:47 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] Hiper DSP Where is nmc chassis awareness ? In TCM I can see in NMC settings: Auto config on Card Initialization = Disable We didn't set anything manually on Hiper ARC. The DSP have factory default setting. Best Regards Shahrooz Sharghi ----- Original Message ----- From: Todd To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Sent: Tuesday, July 26, 2005 11:53 AM Subject: RE: [USR-TC] Hiper DSP Do you have nmc chassis awareness enabled or do you have things setup manually on the arc? List chassis If you don't see the other 2 cards owned by your arc with the correct number of timeslots, etc that may be your problem. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Adam Barnhill Sent: Tuesday, July 26, 2005 2:16 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] Hiper DSP Check your Timeslots for Local/Remote Out of Service messages. It may also be that two timeslots are mapped [Timeslot Mapping and Blocking] to one Modem or something of that nature. -----Original Message----- From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Shahrooz Sharghi Sent: Tuesday, July 26, 2005 12:26 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: [USR-TC] Hiper DSP Hi all We have a tc1000 with this configuration: 1- NMC Card 2- Hiper Access router card 3- 1 E1 DSP ISDN Signaling Max users could connect to it are 29, never we don't have 30 online user together. After 29 online user they get Busy Tone. What do you think about this problem? Regards Shahrooz Sharghi -------------------------------------------------------------------------- _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc ------------------------------------------------------------------------------ _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
MessageThere is only 1 hiper arc. Thanks ----- Original Message ----- From: Todd Bertolozzi To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Sent: Monday, August 01, 2005 10:38 AM Subject: RE: [USR-TC] Hiper DSP Copy and paste to the list what you get when you do a 'list chassis' command. For nmc settings do a 'show nmc settings' This is all done from the hiperarc. If you have more than 1 arc in the chassis you need to set things up on both arcs. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Shahrooz Sharghi Sent: Monday, August 01, 2005 11:47 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] Hiper DSP Where is nmc chassis awareness ? In TCM I can see in NMC settings: Auto config on Card Initialization = Disable We didn't set anything manually on Hiper ARC. The DSP have factory default setting. Best Regards Shahrooz Sharghi ----- Original Message ----- From: Todd To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Sent: Tuesday, July 26, 2005 11:53 AM Subject: RE: [USR-TC] Hiper DSP Do you have nmc chassis awareness enabled or do you have things setup manually on the arc? List chassis If you don't see the other 2 cards owned by your arc with the correct number of timeslots, etc that may be your problem. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Adam Barnhill Sent: Tuesday, July 26, 2005 2:16 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] Hiper DSP Check your Timeslots for Local/Remote Out of Service messages. It may also be that two timeslots are mapped [Timeslot Mapping and Blocking] to one Modem or something of that nature. -----Original Message----- From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Shahrooz Sharghi Sent: Tuesday, July 26, 2005 12:26 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: [USR-TC] Hiper DSP Hi all We have a tc1000 with this configuration: 1- NMC Card 2- Hiper Access router card 3- 1 E1 DSP ISDN Signaling Max users could connect to it are 29, never we don't have 30 online user together. After 29 online user they get Busy Tone. What do you think about this problem? Regards Shahrooz Sharghi -------------------------------------------------------------------------- _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc ------------------------------------------------------------------------------ _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
participants (4)
-
Adam Barnhill -
Shahrooz Sharghi -
Todd -
Todd Bertolozzi