There is only 1 hiper arc.
Thanks
 
----- Original Message -----
From: Todd Bertolozzi
To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.'
Sent: Monday, August 01, 2005 10:38 AM
Subject: RE: [USR-TC] Hiper DSP

Copy and paste to the list what you get when you do a 'list chassis' command.
 
For nmc settings do a 'show nmc settings'
 
This is all done from the hiperarc. If you have more than 1 arc in the chassis you need to set things up on both arcs.
 
Todd
-----Original Message-----
From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Shahrooz Sharghi
Sent: Monday, August 01, 2005 11:47 AM
To: Discussion relating to the 3Com/US Robotics Total Control modemsystems.
Subject: Re: [USR-TC] Hiper DSP

Where is nmc chassis awareness ?
In TCM I can see in NMC settings:
Auto config on Card Initialization = Disable
 
We didn't set anything manually on Hiper ARC.
The DSP have factory default setting.
 
Best Regards
Shahrooz Sharghi
 
----- Original Message -----
From: Todd
To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.'
Sent: Tuesday, July 26, 2005 11:53 AM
Subject: RE: [USR-TC] Hiper DSP

Do you have nmc chassis awareness enabled or do you have things setup manually on the arc? 

 

List chassis

 

If you don’t see the other 2 cards owned by your arc with the correct number of timeslots, etc that may be your problem.

 

Todd

 

-----Original Message-----
From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Adam Barnhill
Sent: Tuesday, July 26, 2005 2:16 PM
To: Discussion relating to the 3Com/US Robotics Total Control modemsystems.
Subject: RE: [USR-TC] Hiper DSP

 

Check your Timeslots for Local/Remote Out of Service messages. It may also be that two timeslots are mapped [Timeslot Mapping and Blocking] to one Modem or something of that nature.

-----Original Message-----
From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Shahrooz Sharghi
Sent: Tuesday, July 26, 2005 12:26 PM
To: Discussion relating to the 3Com/US Robotics Total Control modemsystems.
Subject: [USR-TC] Hiper DSP

Hi all

We have a tc1000 with this configuration:

1- NMC Card

2- Hiper Access router card

3- 1 E1 DSP ISDN Signaling

 

Max users could connect to it are 29, never we don't have 30 online user together.

After 29 online user they get Busy Tone. What do you think about this problem?

 

Regards

Shahrooz Sharghi

_______________________________________________
USR-TC mailing list
USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

_______________________________________________
USR-TC mailing list
USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc