Message

Do you have nmc chassis awareness enabled or do you have things setup manually on the arc?

List chassis

If you don’t see the other 2 cards owned by your arc with the correct number of timeslots, etc that may be your problem.

Todd

-----Original Message-----
From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Adam Barnhill
Sent: Tuesday, July 26, 2005 2:16 PM
To: Discussion relating to the 3Com/US Robotics Total Control modemsystems.
Subject: RE: [USR-TC] Hiper DSP

Check your Timeslots for Local/Remote Out of Service messages. It may also be that two timeslots are mapped [Timeslot Mapping and Blocking] to one Modem or something of that nature.

-----Original Message-----
From: usr-tc-bounces+adam=semo.net@mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Shahrooz Sharghi
Sent: Tuesday, July 26, 2005 12:26 PM
To: Discussion relating to the 3Com/US Robotics Total Control modemsystems.
Subject: [USR-TC] Hiper DSP

Hi all

We have a tc1000 with this configuration:

1- NMC Card

2- Hiper Access router card

3- 1 E1 DSP ISDN Signaling

Max users could connect to it are 29, never we don't have 30 online user together.

After 29 online user they get Busy Tone. What do you think about this problem?

Regards

Shahrooz Sharghi