- USR-TC - mailman.xmission.com

RE: [USR-TC] Error Trying to change Switch Type in TCM
by Joel - Fox Computers 29 May '03

29 May '03

Didn't see if anyone else helped on this, but I thought I'd share my thoughts - This has happened to me before. One thing may be if you are trying to change a bunch of DSP's all at once. Do fewer at a time or even one at a time and you may not get the error. Another thing - if I remember correctly this happened once or twice when the firmware between the cards was incompatible, for example 3.5.109 on the DSP's and 6.x on an old 486 NMC (just an example, don't know for sure if these were the versions) Hope this helps, thanks, Joel -----Original Message----- From: Cindy Smith [mailto:cindyo@ktc.com] Sent: Wednesday, May 28, 2003 10:08 AM To: USR-TC(a)mailman.xmission.com Subject: [USR-TC] Error Trying to change Switch Type in TCM Hi, I am using Total Control Manager Windows Version 8.2.6 When every I try to change the Switch type on a HiperDSP card using TCM Windows, I get a Generic Error concerning the Switch Type OID. Does anyone know a work around for this. I am trying to change the switch type to DMS 100 Thanks in Advance, --Cindy -- ----------------------------- Cindy Smith KTC iNet 896-1111 SysAdmin ----------------------------- _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

Packet Filter
by alex 29 May '03

29 May '03

I have created a filter for some users to allow them access only one website and two dns servers. When this user logs in radius assigns interface this filter (filter_access is on). But ARC sends some errors to syslog. When this happens packets from/to user are still filtered but why errors occure? (This filter is on two arcs, on one v5.1.102 it works perfectly, but on this arc it doesn't). ARC ios V4.1.59. P.S. I copied filter from another arc but still I'm getting this errors. I tried to write this filter in windows (with \r\n and in linux, with only \r), uploaded this filter first in binary and then in ascii (tftp). Always the same result. verify filter <filtername> - shows no errors. Can anybody help? May 19 00:07:40 arc.ip.addr At 15:42:48, Facility "Auth Facility", Level "COMMON":: A call is established, call id 18612240, on interface slot:2/mod:29 May 19 00:07:40 arc.ip.addr At 15:42:48, Facility "Call Initiation Process", Level "COMMON":: CIP: Detected PPP frame, state 1, line 388, File ../../src/cip_xmt_rx.c May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "Auth Facility", Level "COMMON":: Port slot:2/mod:29 successful RADIUS authentication for user: some-username May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "MPIP", Level "COMMON":: MPIP Link registration failed, because the client state is OFF May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "Filter Manager Process", Level "COMMON":: FM: No RADIUS rules available for user_handle=58e007, status=554d650c May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: INPUT=== #filter^M IP:^M ^M 001 AND src-addr = 0.0.0.0/0;^M 002 AND dst-addr = x.x.x.x/32;^M 003 ACCEPT udp-dst-port = 53;^M 004 AND src-addr = 0.0.0.0/0;^M 005 AND dst-addr = y.y.y.y/32;^M 006 ACCEPT udp-dst-port = 53;^M 007 AND src-addr = 0.0.0.0/0;^M 008 AND dst-addr = z.z.z.z/32;^M 009 ACCEPT tcp-dst-port = 80;^M 010 DENY;^M May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 1 (text was '^M') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 2 (text was '^M') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 3 (text was '^M') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 4 (text was '=') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: ERRRRRRORRR May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: =============================================================================== May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: HiPerARC Filter Rules #filter IP: May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: line 4: syntax error near or at "AND" May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: INPUT=== #filter^M IP:^M ^M 001 AND src-addr = x.x.x.x/32;^M 002 AND dst-addr = 0.0.0.0/0;^M 003 AND udp-src-port = 53;^M 004 ACCEPT udp-dst-port > 1023;^M 005 AND src-addr = y.y.y.y/32;^M 006 AND dst-addr = 0.0.0.0/0;^M 007 AND udp-src-port = 53;^M 008 ACCEPT udp-dst-port > 1023;^M 009 AND src-addr = z.z.z.z/32;^M 010 AND dst-addr = 0.0.0.0/0;^M 011 AND tcp-src-port = 80;^M 012 ACCEPT tcp-dst-port > 1023;^M 013 DENY;^M May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 1 (text was '^M') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 2 (text was '^M') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 3 (text was '^M') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 4 (text was '=') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: ERRRRRRORRR May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: =============================================================================== May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: HiPerARC Filter Rules #filter IP: May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: line 4: syntax error near or at "AND" May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "Auth Facility", Level "VERBOSE":: User some-username successfully connected to the PPP process for call id 18612240 on interface slot:2/mod:29 May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "Auth Facility", Level "COMMON":: Port slot:2/mod:29 user some-username session connected, call id 18612240, protocol: PPP - ip address: client.ip.addr May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "User Manager", Level "COMMON":: arc.ip.addr ACCT START: user name: some-username - session: 18612240 - port 1541 - authenticated: RADIUS - type: FRAMED - protocol: PPP - ip address: client.ip.addr May 19 00:07:40 arc.ip.addr At 15:42:48, Facility "Auth Facility", Level "COMMON":: A call is established, call id 18612240, on interface slot:2/mod:29 May 19 00:07:40 arc.ip.addr At 15:42:48, Facility "Call Initiation Process", Level "COMMON":: CIP: Detected PPP frame, state 1, line 388, File ../../src/cip_xmt_rx.c May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "Auth Facility", Level "COMMON":: Port slot:2/mod:29 successful RADIUS authentication for user: some-username May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "MPIP", Level "COMMON":: MPIP Link registration failed, because the client state is OFF May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "Filter Manager Process", Level "COMMON":: FM: No RADIUS rules available for user_handle=58e007, status=554d650c May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: INPUT=== #filter^M IP:^M ^M 001 AND src-addr = 0.0.0.0/0;^M 002 AND dst-addr = x.x.x.x/32;^M 003 ACCEPT udp-dst-port = 53;^M 004 AND src-addr = 0.0.0.0/0;^M 005 AND dst-addr = y.y.y.y/32;^M 006 ACCEPT udp-dst-port = 53;^M 007 AND src-addr = 0.0.0.0/0;^M 008 AND dst-addr = z.z.z.z/32;^M 009 ACCEPT tcp-dst-port = 80;^M 010 DENY;^M May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 1 (text was '^M') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 2 (text was '^M') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 3 (text was '^M') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 4 (text was '=') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: ERRRRRRORRR May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: =============================================================================== May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: HiPerARC Filter Rules #filter IP: May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: line 4: syntax error near or at "AND" May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: INPUT=== #filter^M IP:^M ^M 001 AND src-addr = x.x.x.x/32;^M 002 AND dst-addr = 0.0.0.0/0;^M 003 AND udp-src-port = 53;^M 004 ACCEPT udp-dst-port > 1023;^M 005 AND src-addr = y.y.y.y/32;^M 006 AND dst-addr = 0.0.0.0/0;^M 007 AND udp-src-port = 53;^M 008 ACCEPT udp-dst-port > 1023;^M 009 AND src-addr = z.z.z.z/32;^M 010 AND dst-addr = 0.0.0.0/0;^M 011 AND tcp-src-port = 80;^M 012 ACCEPT tcp-dst-port > 1023;^M 013 DENY;^M May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 1 (text was '^M') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 2 (text was '^M') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 3 (text was '^M') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: invalid token near line 4 (text was '=') May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: ERRRRRRORRR May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: =============================================================================== May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: HiPerARC Filter Rules #filter IP: May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "SBUS", Level "UNUSUAL":: line 4: syntax error near or at "AND" May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "Auth Facility", Level "VERBOSE":: User some-username successfully connected to the PPP process for call id 18612240 on interface slot:2/mod:29 May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "Auth Facility", Level "COMMON":: Port slot:2/mod:29 user some-username session connected, call id 18612240, protocol: PPP - ip address: client.ip.addr May 19 00:07:41 arc.ip.addr At 15:42:49, Facility "User Manager", Level "COMMON":: arc.ip.addr ACCT START: user name: some-username - session: 18612240 - port 1541 - authenticated: RADIUS - type: FRAMED - protocol: PPP - ip address: client.ip.addr

1 0

Callback?
by alex 28 May '03

28 May '03

What do TC (ARC 5.1.102 and/or 4.1.59) need to support callback service? I mean radius configuration, dsp - modems config. and arc configuration. (I know that E1 must support incoming and outgoing calls).

1 0

Weekly Hiper Blow-OUT Posting
by sky1 28 May '03

28 May '03

Still have fully loaded Hiper chassis in stock!!! $2750.00 each Configured as follows: (14) Hiper DSP T-1 card sets (2) Hiper ARC 128Mb Version card sets (1) Hiper NMC (2) 130 Amp AC power supplies (1) Blue Labeled chassis w/ integrated fan assembly I also have a few more Hiper NMC's that I am parting out. Have around 10-15 of them I'd sell for $450.00 each Hiper DSP cards T-1 Version $175.00 each Hiper ARC sets 128Mb Version $100.00 each If anyone needs a spare chassis or 50 let me know!! Thanks for your time, Shannan Young SouthWest Data Technology, Inc. 972-739-7010 972-739-7013 (Fax) sky1(a)airmail.net www.swdt.com

1 0

Error Trying to change Switch Type in TCM
by Cindy Smith 28 May '03

28 May '03

Hi, I am using Total Control Manager Windows Version 8.2.6 When every I try to change the Switch type on a HiperDSP card using TCM Windows, I get a Generic Error concerning the Switch Type OID. Does anyone know a work around for this. I am trying to change the switch type to DMS 100 Thanks in Advance, --Cindy -- ----------------------------- Cindy Smith KTC iNet 896-1111 SysAdmin -----------------------------

1 0

*** CORE DUMP *** - Memory Error
by Teddy Setiady 27 May '03

27 May '03

Hi All, I Plan reflash firmware My Hiper DSP from E1-PRI to E1-R2 with file hr020109.dmf via console, but what happen with this: Begin download now. **B000000063f694 **B000000063f694 Programming Flash ... 0;Download successful: File=hdmsys.dmf !!----------> SDL2 for the PPC403 <------------!! __ Enter Download Trigger __ Flash Image Has Valid CRC, Loading Image.... Diagnostic Power-Up Failure Manufacturing Info -> 1AAA13M0 Mode/Env -> 1/0 Fault Code -> 0-8-26-1 Expected Data -> f005400c Received Data -> f000000c Text Message -> Address Equals Data Test Failure Info Message -> Second read failed. Hard error indicated. > pQ = f01bc9f8 pQ->sender_id = 5 pQ->reader_id = 5 Buffer Owner = 2 proc_id = 0 *** CORE DUMP *** At 00:00:09 01/01/96 Total Uptime: 00:00:13 S/W Rev. 2.1.9.0 built 04/21/00 16:47:44 Memory Error / Other Task = DST BEAR C6DC3438 BESR 00000000 BR0 FC580502 BR1 0C1C4202 BR2 08584202 BR3 1078C200 BR4 04594387 BR5 00594101 BR6 04590A0E BR7 00590A0E DCCR 80008000 DEAR 00080001 ESR 00000000 EVPR 80000000 EXIER 00800009 EXISR 00000002 ICCR 80008001 IOCR 0000C001 MSR 00001200 PVR 00000020 PIT 00013207 SRR0 8000C254 SRR1 00001200 SRR2 8001DF54 SRR3 00009200 TBHI 00000000 TBLO 333F26F1 TCR FC400000 TSR 0C000000 LR 8001DF7C ** Stack Trace ** 80005468 8001DF78 80016488 800EE8AC 800ED048 8004ED3C 8004EB94 pQ = f01bc9f8 pQ->sender_id = 5 pQ->reader_id = 5 Buffer Owner = 2 proc_id = 0 any idea with this? TIA, Regards, -ts-

1 0

static ip assignement
by usr-tc＠adeli.fr 27 May '03

27 May '03

i use freeradius with a new (!) tc but when i assign Framed-IP-Address = 195.167.230.23 without + hiper say to me that this adress overlap! (if i put + after .. it work but the adresse is not static!) does anyone have an idea to do this? Lionel Drevon ldrevon(a)adeli.fr Adeli http://www.adeli.fr 618 Av. Gal de Gaulle Tel 04 78 66 11 85 69760 Limonest Fax 04 78 66 04 33

3 8

Fw: Firmware Problem
by Byca 23 May '03

23 May '03

----- Original Message ----- From: Byca To: usr-tc(a)mailman.xmission.com Sent: Thursday, May 22, 2003 6:11 PM Subject: Firmware Problem Hi, I have a Hiper DSP E1/T1 with hardware version 0.49 and Firmware version 2.0.19, and my telco provider only brings E1/R2 lines, i thought that i need a firmware upgrade, but i can't download the file, because i don't have the contract number, please somebody can help me with the file. Regards Byca

1 0

RE: [USR-TC] Console no workee beyond "Loading Kernal ..... OK" (solution)
by Joel - Fox Computers 22 May '03

22 May '03

LOL... that's funny... Honestly, I agree with your points on Shannan. I've bought more hardware from him than most of you might imagine, and he's been great to work with. It doesn't take much effort to find a shmuck when you do anything on the Internet, but pretty much everyone on this list has been great to work with, whether buying something from them, selling something to them, or just getting help with a problem. Thanks to everyone. Joel Fox (the guy who will NOT hack your rack) :-) -----Original Message----- From: Scott Trautman [mailto:scott@gdinet.com] Sent: Thursday, May 22, 2003 4:32 PM To: 'usr-tc(a)mailman.xmission.com' Subject: [USR-TC] Console no workee beyond "Loading Kernal ..... OK" (solution) Hey there folks, Well, it's been solved here before, but since I wasted a day of my time (& Shannan's @ Southwest Data Tech's too), thought I might just post it for ya'll to put in that 3Com headache folder you have like I do. "New" (to me...) HiperARC cards, console is fine, but only through the initial post & gets only to the 2nd line, which is Kernal loading ......... OK ...then sits and does nothing. Now mind you, the card DOES work, but lacking an ability to get into it and set an IP address is a problem. Flip DIP SWITCH 5 ON And this will go away and it'll but just fine for you. Someone somewhere knows why, not I, not super caring, either, I was able to do me lil' setup script and drive away happy. Another helpful reminder: Be sure to change password/delete adm account if you don't use it/use an alternate. Default I think is still no password. Joel Fox will find you and make consulting work for himself otherwise. (kidding kidding kidding!) Since the cards you get now...may not be brand new, that sheet o' paper in the box saying this thing isn't there anymore. Two lil' duh's for you.... Have a fine Memorial Day weekend. SMT PS: Shannan @ Southwest Data is a gem of a fellow. What incredible customer service. He overnighted me a 2nd card set & was extremely available and helpful. Buy some stuff from him, he deserves the business! (ahem...not that anyone doesn't, I was just super duper pleased). Boy if you don't have backup ARC's/DSP's, hanging around, this is the time to buy them. Scott Trautman President/Owner www.gdinet.com Global Dialog Internet 608-240-4638,7fax 2049 Skaalen Road scott(a)gdinet.com Stoughton WI 53589 Internet Service across Southern Wisconsin

1 0

[USR-TC] Console no workee beyond "Loading Kernal ..... OK" (solution)
by Scott Trautman 22 May '03

22 May '03

Hey there folks, Well, it's been solved here before, but since I wasted a day of my time (& Shannan's @ Southwest Data Tech's too), thought I might just post it for ya'll to put in that 3Com headache folder you have like I do. "New" (to me...) HiperARC cards, console is fine, but only through the initial post & gets only to the 2nd line, which is Kernal loading ......... OK ...then sits and does nothing. Now mind you, the card DOES work, but lacking an ability to get into it and set an IP address is a problem. Flip DIP SWITCH 5 ON And this will go away and it'll but just fine for you. Someone somewhere knows why, not I, not super caring, either, I was able to do me lil' setup script and drive away happy. Another helpful reminder: Be sure to change password/delete adm account if you don't use it/use an alternate. Default I think is still no password. Joel Fox will find you and make consulting work for himself otherwise. (kidding kidding kidding!) Since the cards you get now...may not be brand new, that sheet o' paper in the box saying this thing isn't there anymore. Two lil' duh's for you.... Have a fine Memorial Day weekend. SMT PS: Shannan @ Southwest Data is a gem of a fellow. What incredible customer service. He overnighted me a 2nd card set & was extremely available and helpful. Buy some stuff from him, he deserves the business! (ahem...not that anyone doesn't, I was just super duper pleased). Boy if you don't have backup ARC's/DSP's, hanging around, this is the time to buy them. Scott Trautman President/Owner www.gdinet.com Global Dialog Internet 608-240-4638,7fax 2049 Skaalen Road scott(a)gdinet.com Stoughton WI 53589 Internet Service across Southern Wisconsin

1 0