- USR-TC - mailman.xmission.com

USR TC Dialback (Callback)
by Денис Фролов 06 Feb '04

06 Feb '04

Dear List, Does anybody here have working dialback (callback) on USR TC 1000 with NetServer PRI card and Radius authorization? If yes, how we can to set up this feature? We made all the necessary as the manual says, but we have the folloving string: Feb 6 22:38:32 tc dialnet: port S50 denis dialback requested to Radius is unable to send the dialback location to TC. Thanks in advance Denis

1 0

Programs for TC1000
by Dev 04 Feb '04

04 Feb '04

Hello all, Where can I get information about writing programs for th TC1000. I need to write a custom telnet app and install it. I have it written in c++ and need to know what I need to do to get it working on the TC1000 Thank you all in advance!

1 0

RE: [USR-TC] RE: USR-TC Digest, Vol 12, Issue 1
by Joel - Fox Computers 03 Feb '04

03 Feb '04

David, Did you buy 'em from me? Just curious. I've seen quite a few bad DSP's, like maybe 20 out of 400 or 500. Seems to be the most-common thing to fail. That's one of the reasons I warranty any equip I sell for 6-months. With these things being so cheap any more I doubt they're worth fixing, but just my opinion. I'd sooner buy a rack full of spares for a $1000 than mess around with bad ones. We've been throwing them away. - Joel -----Original Message----- From: David Covell [mailto:dcovell@vtlink.net] Sent: Tuesday, February 03, 2004 11:58 AM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] RE: USR-TC Digest, Vol 12, Issue 1 Hello, Anyone else having trouble with modem cards in 'used' V.92 USR-TC's? We have lost 3 modem cards in the unit we bought May03 from a used vendor. These have been working fine as V.92 and seem to have two designs, one likely newer than the other. Also, anyone know of a place to have these evaluated for repair and advice if that is cost effective or not. David Covell _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: [USR-TC] Internet on Hold question
by Joel - Fox Computers 03 Feb '04

03 Feb '04

My experience has been that your customers have to have the Modem-On-Hold software installed. That software has to be whatever software is provided by the mfr of their modem. Normally it's a download from the mfr's website, or it comes on the driver installation disk with the modem. Of course you have to have V.92 enabled on your DSP's - even if you have the V92 firmware on your DSP's, V.92 is disabled by default. - Joel -----Original Message----- From: Hall, Eric M. [mailto:ehall@amaxx.com] Sent: Tuesday, February 03, 2004 10:18 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: [USR-TC] Internet on Hold question I have a question for the group. Do I need to do anything on my side to get internet on hold to work ? My customers have v 92 modems and I have v.92 code on my dsp however when they connect to the internet and they get a call nothing happens. The phones never ring and the person calling tells them it just rings. Any ideas ? _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

RE: USR-TC Digest, Vol 12, Issue 1
by David Covell 03 Feb '04

03 Feb '04

Hello, Anyone else having trouble with modem cards in 'used' V.92 USR-TC's? We have lost 3 modem cards in the unit we bought May03 from a used vendor. These have been working fine as V.92 and seem to have two designs, one likely newer than the other. Also, anyone know of a place to have these evaluated for repair and advice if that is cost effective or not. David Covell

2 1

RE: [USR-TC] Internet on Hold question
by Hall, Eric M. 03 Feb '04

03 Feb '04

Good call! It was disabled. After I enable it do I need to restart the card ? -----Original Message----- From: usr-tc-bounces+ehall=amaxx.com(a)mailman.xmission.com [mailto:usr-tc-bounces+ehall=amaxx.com@mailman.xmission.com] On Behalf Of Joel - Fox Computers Sent: Tuesday, February 03, 2004 11:21 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: RE: [USR-TC] Internet on Hold question My experience has been that your customers have to have the Modem-On-Hold software installed. That software has to be whatever software is provided by the mfr of their modem. Normally it's a download from the mfr's website, or it comes on the driver installation disk with the modem. Of course you have to have V.92 enabled on your DSP's - even if you have the V92 firmware on your DSP's, V.92 is disabled by default. - Joel -----Original Message----- From: Hall, Eric M. [mailto:ehall@amaxx.com] Sent: Tuesday, February 03, 2004 10:18 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: [USR-TC] Internet on Hold question I have a question for the group. Do I need to do anything on my side to get internet on hold to work ? My customers have v 92 modems and I have v.92 code on my dsp however when they connect to the internet and they get a call nothing happens. The phones never ring and the person calling tells them it just rings. Any ideas ? _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

Internet on Hold question
by Hall, Eric M. 03 Feb '04

03 Feb '04

I have a question for the group. Do I need to do anything on my side to get internet on hold to work ? My customers have v 92 modems and I have v.92 code on my dsp however when they connect to the internet and they get a call nothing happens. The phones never ring and the person calling tells them it just rings. Any ideas ?

1 0

v92 TC1000, v90 TC1000, Analog TC1000, Hiper DSP E1/PRI
by Stephen Rivera - WRCA.Net 03 Feb '04

03 Feb '04

Available in stock. 90 day warranty. v92 Chassis dual 130A - AC or DC power Hiper NMC Hiper ARC x2 Hiper DSP (T1) x14 $1000 v90 Bundle with T1/PRI $200 v90 Bundle with E1/PRI $650 Includes: Chassis dual 70A - AC or DC power NMC v90 Hiper ARC Quad Digital Modems x12 Dual PRI Analog Bundles Chassis with Dual 130A power NMC Hiper ARC Quad Analog/Digital Modems x15 $800 Card Sets 4- EdgeServer Pro card sets...email 10- Hiper DSP E1/PRI $795 Qty -Hiper DSP T1/PRI $200 Qty - Hiper ARC (128/16) $125 Qty - Quad Digital Modems $15ea Qty - 70A pwr sets $50 5- 130A DC power sets $325 All pricing negotiable within reason. Parts and Pieces available too. If you need something TC1000 and dont see it listed please contact me. Its likely I have it. ********************************************************************* Steve Rivera IM: srivera711 (877)WRCANET x102 for more product info got www.wrca.net Providing Hardware Solutions Since 1981.

1 0

RE: [USR-TC] Complete V.92 units available
by Joel - Fox Computers 01 Feb '04

01 Feb '04

Sorry, don't have anything for E1. Thanks! Joel -----Original Message----- From: alliance.m1(a)aon.at [mailto:alliance.m1@aon.at] Sent: Friday, January 30, 2004 4:50 AM To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Subject: AW: [USR-TC] Complete V.92 units available Hello, I´m interested in 30Channel DSP´s Hiper sets (NIC+NAC). Do you have some? Thanks, GN -----Ursprüngliche Nachricht----- Von: usr-tc-bounces+peterquelle=gmx.net(a)mailman.xmission.com [mailto:usr-tc-bounces+peterquelle=gmx.net@mailman.xmission.com] Im Auftrag von Joel - Fox Computers Gesendet: Donnerstag, 29. Januar 2004 21:22 An: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Betreff: [USR-TC] Complete V.92 units available Wichtigkeit: Hoch Just in case anyone is needing anything or even a spare chassis, here's what I have: Blue-Label 3Com Chassis (2) 130 AMP AC Power Supplies (1) Hiper NMC Card Set (2) Hiper ARC Sets w/ 128 MB memory (14) Hiper DSP Cards Asking $1000/each + shipping 6-month repair or replace warranty Have several available. Let me know if you're interested. Thanks, Joel _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

3 2

Complete V.92 units available
by Joel - Fox Computers 30 Jan '04

30 Jan '04

Just in case anyone is needing anything or even a spare chassis, here's what I have: Blue-Label 3Com Chassis (2) 130 AMP AC Power Supplies (1) Hiper NMC Card Set (2) Hiper ARC Sets w/ 128 MB memory (14) Hiper DSP Cards Asking $1000/each + shipping 6-month repair or replace warranty Have several available. Let me know if you're interested. Thanks, Joel

2 1