- USR-TC - mailman.xmission.com

qr051009
by teddy＠peugeot504.net 17 Mar '04

17 Mar '04

Dear All, Does Anyone have this modem version 5.10.9 qr051009.nac ? pls send me, TIA Rgds, -ts-

1 0

RE: [USR-TC] Hiper Arc Code 5.3.3
by Joel - Fox Computers 17 Mar '04

17 Mar '04

Get an older version of HARM. v. 1.1.8 works with it because it doesn't check version at startup. Now, you will find some features that either aren't there (are newer than HARM 1.1.8) or don't work (were changed after 1.1.8). But you can get into it, and I know some things, like setting up filters, setting up RADIUS, etc. do work because I've used them. - Joel ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ FYI for everyone: Still have some loaded V.92 Racks available for sale. Give me a call if interested and make me an offer! 712-792-8990 Thanks! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -----Original Message----- From: Kris McElroy [mailto:kris.mcelroy@duracom.net] Sent: Wednesday, March 17, 2004 1:00 PM To: Usr-Tc(a)Mailman.Xmission.Com Subject: [USR-TC] Hiper Arc Code 5.3.3 I have Hiper Arc Code 5.3.3 on a Hiper Arc. I am trying to access it via HARM 2.2.6 and it says "Your Router is running 5.3.3. HARM 5.2 works with ARC 5.2* How Can I manage this Hiper Arc with HARM? Thanks, Kris McElroy _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

Code versions
by Jamie Orzechowski 17 Mar '04

17 Mar '04

Hello ... I have DSP Code 3.5.109, 3.5.105 and 3.5.103 ... I am assuming that 3.5.109 is the newest because of the higher version number?

2 1

USR TC1000 errors to worry about?
by Gerald 15 Mar '04

15 Mar '04

CHASSIS - X.X.X.2 Environmental Stats out of Range DSP - DSP card on chassis X.X.X.2 has 1 unavailable lines DSP - DSP card on chassis X.X.X.2 has 2 unavailable lines DSP - DSP card on chassis X.X.X.2 has 3 unavailable lines CHASSIS - X.X.X.4 Environmental Stats out of Range DSP - DSP card on chassis X.X.X.4 has 1 unavailable lines DSP - DSP card on chassis X.X.X.4 has 2 unavailable lines The DSP errors have been screaming for a while. I would love to know how to properly troubleshoot them and shut them up. One of the Chassis has been complaining about Env stats for a while but performing services fine. Now another is griping about the same thing. All of the fans appear to be spinning and while the co-loc room that houses these is warmer than I would like, they are still well within normal operating temperatures. Any suggestions for these errors coming through my Total Controls? I have a spare ready to throw in production if need be, but all services are performing normally at the moment. I'm pretty comfortable with the TCs we have, but I know they can be finicky. Let me know if there is more information that would help others help me troubleshoot this. Thanks for help and suggestions in advance. Gerald

2 2

Enable v.92 via CEM
by Malcolm Kynoch 12 Mar '04

12 Mar '04

Hi, Still digging through CEM, how do I enable/config v.92 features on the DSPs via the CEM. Regards, Malcolm

1 0

WTB: MultiSpan & ARC(56bit encrypt) WTS: E1&T1 bundles
by Stephen Rivera - WRCA.Net 08 Mar '04

08 Mar '04

Have an immediate need for... 2- Access Router Card Set Ethernet 56-Bit Encryption PN#3CR59504690 7- 96 port MultiSpan Card set PN#3C0504222-00 WTS: TC1000 with dual power Hiper NMC 2- Hiper ARC 14- Hiper DSP E1/PRI $9000.00 TC1000 with dual power Hiper NMC 2- Hiper ARC 14- Hiper DSP T1/PRI $950.00 ********************************************************************* Steve Rivera IM: srivera711 (877)WRCANET x102 for more product info got www.wrca.net Providing Hardware Solutions Since 1981.

1 0

disconnect codes
by Wayne Tucker 06 Mar '04

06 Mar '04

I'm trying to troubleshoot a connection problem using the information in syslog - I try to use TCM only as a last resort ;) - but I don't know how to interpret the reason code that I am receiving from the unit. I tried looking it up in the modem and DS0 MIBs, but the codes in there don't seem to fit the other calls I am seeing. Is there a document somewhere that defines these codes? At 15:47:15, Facility "Auth Facility", Level "COMMON":: call disconnected on slot:2/mod:20 id: 18023056 user: xxxx duration: 2340secs reason: 2 Thanks, Wayne -- Wayne A. Tucker Sr. Network Engineer, Aspiring Guru wtucker(a)donobi.com DONOBI, Inc. <http://www.donobi.com/> +1-360-473-1169 "The Internet Solutions Company"

2 1

WTB: TC1000 MultiSpan, 333NMC, ARC
by Stephen Rivera - WRCA.Net 02 Mar '04

02 Mar '04

please send me an email if you have any of this hardware available Total Control 1000 DSP Multispan 96-Port T1 Card Set UTStarcom 3C05404222-00 2 Total Control 1000 Network Management Card Set 333 MHz UTStarcom 3C0504218-00 2 Total Control 1000 Access Router Card Set Ethernet 56-Bit Encryption UTStarcom 3CR59504690-00 ********************************************************************* Steve Rivera IM: srivera711 (877)WRCANET x102 for more product info got www.wrca.net Providing Hardware Solutions Since 1981.

1 0

Want to Buy: Qty 2 Hiper NMC NIC/NAC set
by Russell Newberry 02 Mar '04

02 Mar '04

Need to buy TODAY: Qty 2 Total Control Hiper NMC NIC/NAC sets I can pay today. I need these shipped overnight. Thanks, Russell Newberry ==================== Maxis Technologies, Inc 433 W. Wilshire Blvd. Ste 2B Oklahoma City, OK 73116 Voice: 1-800-79-MAXIS Int'l: 1-405-842-3331 FAX: 1-405-841-7882 find us on the web at www.maxistech.net email to: russell(a)maxistech.net AOL IM "RUSSELLatMAXIS"

1 0

WTS: v92 TC1000 bundles 336port
by Stephen Rivera - WRCA.Net 02 Mar '04

02 Mar '04

Have 5 in stock. All v92... TC1000 chassis with dual 130A power Hiper NMC 2- Hiper ARC 14- Hiper DSP $950.00 Hiper DSP $175ea Hiper ARC $125ea ********************************************************************* Steve Rivera IM: srivera711 (877)WRCANET x102 for more product info got www.wrca.net Providing Hardware Solutions Since 1981.

1 0