if you hilight either span (ie not the whole card), select the
configuration, PRI Trunk Settings. The option is Primary Switch Type Set.
I'm not sure what the right choice would be given your telco's switch type.
Matthew Stainforth || Technical Services Manager || BrunNet Inc.
> -----Original Message-----
> From: Lou Bernstein [mailto:lbernste@nortelnetworks.com]
> Sent: Monday, June 19, 2000 4:08 PM
> To: usr-tc(a)lists.xmission.com
> Subject: RE: (usr-tc) Dual PRI CARD
>
>
> Thanks for the tips,
>
> Where would the switch type option be, I could not find it in
> the config of
> the PRI card, the software revision on the card is 4.2.1.
>
> Thanks,
>
> LOU
>
> At 02:17 PM 6/19/00 -0300, you wrote:
> >
> >also make sure you have the channel->modem assignment set up
> correctly...or
> >alternatively have it set to first available or round robin
> in which case
> >you don't need to do the channel->modem assignment. Other
> than that, all
> >you should really need to confirm is the framing, coding,
> and switch type
> >options.
> >
> >You should be able to troubleshoot with your switch people
> to see whether
> >the switch is sending the call to you or if you're getting a
> busy because
> >the switch thinks you're unable to take calls. If they see
> the call being
> >sent to you, you have a problem accepting the call either
> because there's no
> >modem available or the arc is refusing it for some reason.
> If the switch is
> >just refusing to talk to you, it is most likely a signalling
> >issue...assuming that, as mentioned before, there are no alarms.
> >
> >Matthew Stainforth || Technical Services Manager || BrunNet Inc.
> >
> >
> >> -----Original Message-----
> >> From: Jeff Mcadams [mailto:jeffm@iglou.com]
> >> Sent: Monday, June 19, 2000 2:05 PM
> >> To: usr-tc(a)lists.xmission.com
> >> Subject: Re: (usr-tc) Dual PRI CARD
> >>
> >>
> >> Also sprach Lou Bernstein
> >> >I need a little help here. I have a TC with a HIPER ARC,
> >> several HIPER
> >> >DSP cards, some Quad Digital cards and a Dual PRI-Card
> NAC. I have
> >> >been running for a long time with the HIPER DSP cards
> >> without problems.
> >> >I now need to run the Quad cards and can not seem to get
> the Dual PRI
> >> >card to work(it did work at one time). The PRI line is
> coming from a
> >> >Lucent Definity 3G switch and works fine with the Hiper DSP cards.
> >> >When I connect the PRI line to the Dual PRI card all I
> get is a busy
> >> >signal, the link does show that it is up and there are no
> alarms..
> >>
> >> Probably need to check the configs on the quads to make sure
> >> they're set
> >> up to take calls from the PRI...like line source to
> pritdm, proly some
> >> others that I'm not thinking of off the top of my
> head...line source
> >> would be the first thing I'd check...and, of course, make
> >> sure that the
> >> interfaces are active and up on the Arc so that the quads
> can get the
> >> signal to answer the call, so they in turn can signal the
> >> dual-pri card.
> >> --
> >> Jeff McAdams Email: jeffm(a)iglou.com
> >> Head Network Administrator Voice: (502) 966-3848
> >> IgLou Internet Services (800) 436-4456
> >>
> >> -
> >> To unsubscribe to usr-tc, send an email to
> "majordomo(a)xmission.com"
> >> with "unsubscribe usr-tc" in the body of the message.
> >> For information on digests or retrieving files and old
> messages send
> >> "help" to the same address. Do not use quotes in your message.
> >>
> >
> >-
> > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com"
> > with "unsubscribe usr-tc" in the body of the message.
> > For information on digests or retrieving files and old messages send
> > "help" to the same address. Do not use quotes in your message.
> >
>
> -
> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com"
> with "unsubscribe usr-tc" in the body of the message.
> For information on digests or retrieving files and old messages send
> "help" to the same address. Do not use quotes in your message.
>
-
To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com"
with "unsubscribe usr-tc" in the body of the message.
For information on digests or retrieving files and old messages send
"help" to the same address. Do not use quotes in your message.