- USR-TC - mailman.xmission.com

(usr-tc) problem
by Valantine Nchemty Nyenty 30 Jun '00

30 Jun '00

Hi all We have noticed that the Ip address of the TC is propagated to Windows 98 PCs on our network as a default roon. This sometimes prevents some of our customers from connecting to the Internet. When we perform a ping to any computer in the internet, it says : response from the TC IP address , destination unreachable. What can I do to solve this problem? hanks in advance Valantine Nchemty Nyenty - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) cause code 31 and lost carrier problems
by Valantine Nchemty Nyenty 30 Jun '00

30 Jun '00

Hi all, we are an ISp and we have a Total control 1000 multiservice platform. we have 6 Quad V.34 Quad Analogue/ Digital modems. We have some clients who can connect to our terminal server but get disconnected after 35 seconds. What coul dwe do to completely eliminate this problem? We suggest the PTT lines are not quite good but we face situations where customers are disconnected due to loss carrier. We modified the carrier loss detect delay to 250. this reduced the problem. we would like to completely solve this problem. What could we do to solve these problems completely. Thanks in advance. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 1

(usr-tc) Dialout with Quad Digital Modem cards
by Lou Bernstein 30 Jun '00

30 Jun '00

Hey All, I need some help in dialing out of a Quad Digital Modem card using the analog NIC's serial port. When I try this, the modem dials and the remote modem answers the call and starts handshake. After the completion of the handshake, the connection is then dropped within seconds. I tested this to several different server modems as well as a USR sportster. The Quad card software version is 5.10.9 and the Analog NIC is 1.1.0. I have tried this with several different Quad cards with the same results. If I Telnet to the Quad card and dial it connects and works fine. Any help would be appreciated. Lou Bernstein - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) AO/DI supported?
by Walt Gnann 29 Jun '00

29 Jun '00

I have a customer that wants to have a 24/7 ISDN connection but doesn't want to pay for a dedicated ISDN line to us (gee, I guess all customers want that ;) The ISDN router he's using supports AO/DI where the D-Channel stays active and brings up the B channels automatically for incoming data. Is this something supported by the TC box, telco providing the ISDN, or both? Anything need to be configured/set on the TC to support these connections? Any other considerations in providing this type of service? Thanks, Walt ----------------------------------------------- Walter N. Gnann ISLC, Tech Support http://www.islc.net 843.770.1000 ----------------------------------------------- - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Dialout with Quad Digital Modem cards
by Lou Bernstein 29 Jun '00

29 Jun '00

Hey All, I need some help in dialing out of a Quad Digital Modem card using the analog NIC's serial port. When I try this, the modem dials and the remote modem answers the call and starts handshake. After the completion of the handshake, the connection is then dropped within seconds. I tested this to several different server modems as well as a USR sportster. The Quad card software version is 5.10.9 and the Analog NIC is 1.1.0. I have tried this with several different Quad cards with the same results. If I Telnet to the Quad card and dial it connects and works fine. Any help would be appreciated. Lou Bernstein - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Password on a quad modem hub
by Greg Long 28 Jun '00

28 Jun '00

If there is no telnet access at all then how come I can get a login screen when I access the IP for the NETServer Card through a telnet client? It announces itself as a U.S. Robotics Total Control NETServer (tm) and has a login prompt. Thanks, Greg Long Network Administrator Coastlink 801-532-6212 ext 32 greg(a)coastlink.com http://www.coastlink.com > -----Original Message----- > From: owner-usr-tc(a)lists.xmission.com > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of David Hamilton > Sent: Wednesday, June 28, 2000 11:57 AM > To: usr-tc(a)lists.xmission.com > Subject: RE: (usr-tc) Password on a quad modem hub > > > The ip pools are handled by the ARC card. You can use the > proprietary 3com > cable to access this card. There might be a password > associated with this > access though. Depends on how the card was setup. The same > thing is true > for the nmc. The only way to access the nmc is through the > cable. There is > no telnet access at all. (We have requested this from 3com > several times). > > If the ARC has a password on the rs232 interface, then as far > as I know, > your screwed. There might be a default account associated > with the arcs > though. If it hasn't been removed (it should have been > because it is a > security risk) then you might try that. I think the username > is adm. I'm > not sure what the password is. > > If these things don't work then you might have to blow out > the config on the > arc and set it up again. Since your administering the system > you should > know all the needed values (ip pools, gateway, etc). > > > > -----Original Message----- > > From: owner-usr-tc(a)lists.xmission.com > > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Greg Long > > Sent: Wednesday, June 28, 2000 1:43 PM > > To: usr-tc(a)lists.xmission.com > > Subject: RE: (usr-tc) Password on a quad modem hub > > > > > > Hi Jorge! > > > > I am trying to access any and all cards. I have the USR > Management suite, > > but it isn't showing me IP pools. So I need to access > whichever card is > > handling the IP pool. I would think it's the NMC card. > You tell me. > > > > > -----Original Message----- > > > From: owner-usr-tc(a)lists.xmission.com > > > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jorge Lozano > > > Sent: Wednesday, June 28, 2000 10:36 AM > > > To: usr-tc(a)lists.xmission.com > > > Subject: Re: (usr-tc) Password on a quad modem hub > > > > > > > > > Hi Greg.. > > > I has worked a lot with quad modems... can you tell me what > > > cards are you > > > trynig to access? netserver.. NMC.. dual? > > > > > > Regards, > > > > > > Jorge Lozano > > > > > > ----- Original Message ----- > > > From: "Greg Long" <greg(a)coastlink.com> > > > To: <usr-tc(a)lists.xmission.com> > > > Sent: Tuesday, June 27, 2000 3:51 PM > > > Subject: (usr-tc) Password on a quad modem hub > > > > > > > > > > I asked this question a few weeks ago. I am hoping someone > > > knows a way > > > into > > > > a USRobotics Total Control Enterprise Hub if you don't have > > > the password > > > for > > > > the telnet access. It is a quad modem hub with dual pri's > > > and an NMC. > > > The > > > > previous admin has forgotten the password, and where he > > > says it was stored > > > > doesn't exist anymore. Someone mentioned there is a way to > > > flush the > > > memory > > > > which would restore the password to factory default but it > > > will probably > > > > flush other settings as well. Seeing as how I can't get > > > into the box to > > > see > > > > how it is setup, I'd really hate to try to figure out what > > > settings would > > > > need to change if I lost some vital info in the flush. > > > I've also heard > > > talk > > > > about hardwiring into the NMC with a crossover cable. Has > > > anyone done > > > this? > > > > Does it bypass the password used with telnetting? > > > > > > > > Thanks, > > > > Greg Long > > > > Network Administrator > > > > Coastlink > > > > 801-532-6212 ext 32 > > > > greg(a)coastlink.com > > > > http://www.coastlink.com > > > > > > > > > > > > - > > > > To unsubscribe to usr-tc, send an email to > "majordomo(a)xmission.com" > > > > with "unsubscribe usr-tc" in the body of the message. > > > > For information on digests or retrieving files and old > > > messages send > > > > "help" to the same address. Do not use quotes in your message. > > > > > > > > > - > > > To unsubscribe to usr-tc, send an email to > "majordomo(a)xmission.com" > > > with "unsubscribe usr-tc" in the body of the message. > > > For information on digests or retrieving files and old > messages send > > > "help" to the same address. Do not use quotes in your message. > > > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old > messages send > > "help" to the same address. Do not use quotes in your message. > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) Password on a quad modem hub
by Greg Long 28 Jun '00

28 Jun '00

Hi Jorge! I am trying to access any and all cards. I have the USR Management suite, but it isn't showing me IP pools. So I need to access whichever card is handling the IP pool. I would think it's the NMC card. You tell me. > -----Original Message----- > From: owner-usr-tc(a)lists.xmission.com > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jorge Lozano > Sent: Wednesday, June 28, 2000 10:36 AM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) Password on a quad modem hub > > > Hi Greg.. > I has worked a lot with quad modems... can you tell me what > cards are you > trynig to access? netserver.. NMC.. dual? > > Regards, > > Jorge Lozano > > ----- Original Message ----- > From: "Greg Long" <greg(a)coastlink.com> > To: <usr-tc(a)lists.xmission.com> > Sent: Tuesday, June 27, 2000 3:51 PM > Subject: (usr-tc) Password on a quad modem hub > > > > I asked this question a few weeks ago. I am hoping someone > knows a way > into > > a USRobotics Total Control Enterprise Hub if you don't have > the password > for > > the telnet access. It is a quad modem hub with dual pri's > and an NMC. > The > > previous admin has forgotten the password, and where he > says it was stored > > doesn't exist anymore. Someone mentioned there is a way to > flush the > memory > > which would restore the password to factory default but it > will probably > > flush other settings as well. Seeing as how I can't get > into the box to > see > > how it is setup, I'd really hate to try to figure out what > settings would > > need to change if I lost some vital info in the flush. > I've also heard > talk > > about hardwiring into the NMC with a crossover cable. Has > anyone done > this? > > Does it bypass the password used with telnetting? > > > > Thanks, > > Greg Long > > Network Administrator > > Coastlink > > 801-532-6212 ext 32 > > greg(a)coastlink.com > > http://www.coastlink.com > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old > messages send > > "help" to the same address. Do not use quotes in your message. > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) framed-netmask vs. framed-route
by Mark Thornton 28 Jun '00

28 Jun '00

I have always set up my routed connections on my TCH's by assigning the framed-address and framed-netmask from my radius server (VopRadius) and it has worked great. I am adding a Cisco router to the mix for ADSL aggregation and have been working on getting that configured. In the process of doing so I noted that on a Cisco it appears I should use the framed-route attribute in order to set up the route for the connection (ne mention of using framed-netmask). I know the Hiperarc's will automatically create a route for each connection and distribute it via rip or ospf. Is this how I have avoided needing to deal with the framed-route attribute before now? Is there any benefit to including the framed-route in the radius response to the NAS? Thanks for your assistance, Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 5

(usr-tc) Password on a quad modem hub
by Greg Long 28 Jun '00

28 Jun '00

I asked this question a few weeks ago. I am hoping someone knows a way into a USRobotics Total Control Enterprise Hub if you don't have the password for the telnet access. It is a quad modem hub with dual pri's and an NMC. The previous admin has forgotten the password, and where he says it was stored doesn't exist anymore. Someone mentioned there is a way to flush the memory which would restore the password to factory default but it will probably flush other settings as well. Seeing as how I can't get into the box to see how it is setup, I'd really hate to try to figure out what settings would need to change if I lost some vital info in the flush. I've also heard talk about hardwiring into the NMC with a crossover cable. Has anyone done this? Does it bypass the password used with telnetting? Thanks, Greg Long Network Administrator Coastlink 801-532-6212 ext 32 greg(a)coastlink.com http://www.coastlink.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) SNMP Trap host
by Steve Johnson 27 Jun '00

27 Jun '00

Hello, I've been reading through the CD that came with my hyperDSP cards, and I have not been able to find the answer to my question. We have a linux box that is a SNMP trap host. It traps any errors on equipment via SNMP and logs them on this box, and pages us etc.. How can I setup the totalcontrol gear to use a SNMP log host? Thanks for any help. -Steve - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0