- USR-TC - mailman.xmission.com

(usr-tc) Bind 2 ISDN chammels
by Steve Cobb 08 Jun '00

08 Jun '00

OK guys, I have a little more information now than I did. We are trying to use a virtual ISP for some of our pops but we want to offer 128k ISDN. I am told by the virtual ISP that they only offer 64K ISDN. They are apparently using Lucent Portmaster access servers which I don't have access to. I know this is a USR list but I was hoping someone had an idea. Is there an ISDN router out there that will take 2 separate accounts, i.e. two different usernames with two different 64K channels, and bind them to each other to make a single 128k channel? Thanks for your help guys!! Steve - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 9

RE: (usr-tc) IP Pool
by Blake Fithen 05 Jun '00

05 Jun '00

li ip pools del ip pool add ip pool ? blake > -----Original Message----- > From: Kenneth Nye [mailto:ken@surfnetusa.com] > Sent: Monday, June 05, 2000 1:07 PM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) IP Pool > > > Could someone refresh my memory with the command line > commands to view..and > change the ip pools? > > Thanks > Ken > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) TCS 4.0 on TotalService
by Stainforth, Matthew 05 Jun '00

05 Jun '00

sorry, I had a mailserver decide to crap the bed and resend a bunch of emails. This is one I previously sent a few weeks ago. And the "she" is Michelle Catalano, referred to down further in the thread. Matthew Stainforth || Technical Services Manager || BrunNet Inc. > -----Original Message----- > From: Ved [mailto:ved@iyka.com] > Sent: Thursday, June 01, 2000 11:32 PM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) TCS 4.0 on TotalService > > > ---- Original Message ----- > From: "Stainforth, Matthew" <MatthewS(a)staff.brunnet.net> > To: <usr-tc(a)lists.xmission.com> > Sent: Thursday, May 25, 2000 12:32 PM > Subject: RE: (usr-tc) TCS 4.0 on TotalService > > > > > > I refuse to get a contract as long as she is still employed > by 3Com. My > var > She ?? Who she? > > -V > > > provides all the support I need, and Westcon has some > competitive service > > offerings. > > > > Matthew Stainforth || Technical Services Manager || BrunNet Inc. > > > > > > > -----Original Message----- > > > From: Denis Newkirk [mailto:dnewkirk@early.com] > > > Sent: Thursday, May 25, 2000 2:28 PM > > > To: usr-tc(a)lists.xmission.com > > > Subject: Re: (usr-tc) TCS 4.0 on TotalService > > > > > > > > > I, for one, have lost all respect for 3COM and their > rip-off service > > > contracts. Besides dealing with Michelle's attitude, I have > > > had to fight > > > for access for the code ever since my last renewal. > > > > > > Now... once again, being paid up until sometime in the 7th > > > month of this > > > year, and with new code out, I see I have to once again beg > > > for the access > > > I've paid for. > > > > > > > > > > > > At 11:43 AM 5/25/00 -0400, you wrote: > > > >It looks like TCS 4.0 is in the process of being released. I > > > >happened to check the TotalService site this morning and found > > > >updates for the HiperARC, HiperDSP, 16 Meg NMC, and TCM for > > > >Windows, HP and Solaris (still no Linux). The link for the new > > > >HiperARC Manager software is broken or the file isn't > out there yet. > > > > > > > >Since I still have older equipment (quads and dual-T1), > I probably > > > >won't be upgrading right away. The compatibility matrix > had not yet > > > >been updated. > > > > > > > >So, who wants to be first? > > > > > > > >Wayne Barber > > > >Coastal Telco Services > > > > > > > >- > > > > To unsubscribe to usr-tc, send an email to > "majordomo(a)xmission.com" > > > > with "unsubscribe usr-tc" in the body of the message. > > > > For information on digests or retrieving files and old > > > messages send > > > > "help" to the same address. Do not use quotes in your message. > > > > > > > > > - > > > To unsubscribe to usr-tc, send an email to > "majordomo(a)xmission.com" > > > with "unsubscribe usr-tc" in the body of the message. > > > For information on digests or retrieving files and old > messages send > > > "help" to the same address. Do not use quotes in your message. > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old > messages send > > "help" to the same address. Do not use quotes in your message. > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) IP Pool
by Kenneth Nye 05 Jun '00

05 Jun '00

Could someone refresh my memory with the command line commands to view..and change the ip pools? Thanks Ken - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Binding 2 ISDN channels
by Steve Cobb 05 Jun '00

05 Jun '00

Anyone know how to bind two 64k ISDN channels to one 128k connection? Some of the "virtual ISP's" will only offer 64k connections in my area and I need to be able to offer 128k to customers. I'm using RadiusNT to authenticate and can offer customers two separate accounts with different userids but I need to bind them to one. Thanks for the help. Steve Cobb - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) tcs 4.0 snmp trap weirdity
by Mike Andrews 05 Jun '00

05 Jun '00

Every time someone screws up their password dialing in, I'm getting an SNMP trap. I can't find the setting to disable it. My first guess was "disable snmp authentication traps", but that's for failed SNMP queries (wrong community name), not failed Radius logins. Anyone else find where this is buried yet? (This didn't happen on beta code from what I can remember.) Mike Andrews (MA12) * mandrews(a)dcr.net * http://www.bit0.com/ VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet services for Frankfort, Lawrenceburg, Owenton, Shelbyville www.fark.com: If it's not news, it's Fark. (Or something like that.) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) WTB: 2- USR Hiper DSP's
by ISP-NetworkHardware.com 02 Jun '00

02 Jun '00

Looking to buy now. If you have them please email me. Steve Rivera (VP) - w-732-833-2111 / c-732-433-5890 24Hr ICQ# 75229638 Email Page 7324335890(a)page.nextel.com (start message with YOUR email address) Worldwide Provider of Network Hardware Since 1981. http://www.wrca.net or http://www.ISP-NetworkHardware.com Cisco, Ascend,USR,Adtran, Kentrox,Livingston, Microcom,Computone,BayNetworks, Verilink,IBM,Motorola,UDS,Codex,ATT/Paradyne,Hayes,Racal,GDC,Telebit,MultiTech, Sync/Tylink,Wellfleet,,Black Box,Micom & More - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) TCM - "Delete Database Error"
by Kevin Benton 02 Jun '00

02 Jun '00

Can anyone offer suggestions on how I can resolve an issue on my Win95 computer which I have uninstalled TCM, deleted c:\usrsuite, then reinstalled and I still have chassis in my chassis list which I can not modify or delete? I've looked in registry for the community names, the chassis names, the IP addresses, etc. and I just can't find where in the world TCM is getting its data from. I've also looked in the ini files and still couldn't locate the information. Kevin Benton E-Mail: s1kevin(a)tims.net Web: http://users.sota-oh.com/~s1kevin/ Unsolicited advertisements processing fee: $50 subject to change without notice - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) And you thought you were frustrated with 3COM
by Tim Brown 01 Jun '00

01 Jun '00

I have 8 Ascend Max 4xxx units in place in multiple POPs and they work great. You may hear moans and groans about their menu interface, but you can telnet to the box and manage everything--users, routing, modems, T1's. I have three POP's each with a single MAX 4xxx--2 PRI's or CT1's plugged in for dial-up, one fract T1 plugged in for Frame Relay backhaul to our main POP--no seperate router, hub, etc.--you can set them up like a "POP in a box". I think the quality of the V.90 code has already been mentioned--it's very good. If I were opening a new POP tommorrow, I'd install an Ascend Max 4xxx (I think I just saw a post with a few used ones fully configured for $6500). Just my $0.02. Tim Brown SumterNet, Inc. -----Original Message----- From: Mike Andrews <mandrews(a)bit0.com> To: usr-tc(a)lists.xmission.com <usr-tc(a)lists.xmission.com> Date: Thursday, June 01, 2000 4:21 PM Subject: Re: (usr-tc) And you thought you were frustrated with 3COM >On Thu, 1 Jun 2000, Jeff Mcadams wrote: > >> >I *was* considering picking up some Ascend gear to compliment my 3COM >> >stuff, but I am seriously reconsidering that. So, what's left - Ci$co? >> >Are they the only company that provides the kind of support ISP's need? >> >> Yeah, pretty much...but their modems suck swamp water through a straw. >> I've always said I'd love to have 3Com's modems, with Cisco's routing >> capabilities. Ah, what I wouldn't give for a new version of the AS5100. > >That would be really slick. Gimme the ability to put modems running Quad >code (or maybe very very recent DSP code) in our Cisco 7206VXR. Mmmmm. >:) > >I've not heard much good about Cisco's v.90 code. I've got some Rockwell >SoftK56 modems at home (for testing) that won't even connect *at all* to >some local Cisco numbers. They'll talk to 3Com and Ascend most of the >time. > >Ascend's probably a very close second to 3Com in v.90 reliability, or >maybe slightly ahead now (they work better with Motorola SM56 modems >relative to TCS 3.6, that's about all I know)... but managing an Ascend >is an absolute nightmare... not just those awful menus, but they have >some, uh, "unique" ideas about how SNMP and Radius should work that just >blew my mind last time I had the misfortune of working with one... > >I personally don't really need tech support from the vendor... I've got >this mailing list, and I've got the knowhow to tear into it and figure it >out (or reverse engineer it) myself. I'm not afraid to read a few RFC's >here and there. As long as I can get hardware fixed, and get updated >software easily I'm good to go. (Something 3Com is a bit lacking on -- >like Jeff, I can't download TCS 4.0 even though I was in the beta! >Fortunately the released code seems to be the same as the last release >candidate... but it's not like Cisco where I can just jump on CCO and get >the latest bugfix when I run into a problem.) > > >Mike Andrews (MA12) * mandrews(a)dcr.net * http://www.bit0.com/ >VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY >Internet services for Frankfort, Lawrenceburg, Owenton, Shelbyville >www.fark.com: If it's not news, it's Fark. (Or something like that.) > > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) TCS 4.0 on TotalService
by Stainforth, Matthew 01 Jun '00

01 Jun '00

I refuse to get a contract as long as she is still employed by 3Com. My var provides all the support I need, and Westcon has some competitive service offerings. Matthew Stainforth || Technical Services Manager || BrunNet Inc. > -----Original Message----- > From: Denis Newkirk [mailto:dnewkirk@early.com] > Sent: Thursday, May 25, 2000 2:28 PM > To: usr-tc(a)lists.xmission.com > Subject: Re: (usr-tc) TCS 4.0 on TotalService > > > I, for one, have lost all respect for 3COM and their rip-off service > contracts. Besides dealing with Michelle's attitude, I have > had to fight > for access for the code ever since my last renewal. > > Now... once again, being paid up until sometime in the 7th > month of this > year, and with new code out, I see I have to once again beg > for the access > I've paid for. > > > > At 11:43 AM 5/25/00 -0400, you wrote: > >It looks like TCS 4.0 is in the process of being released. I > >happened to check the TotalService site this morning and found > >updates for the HiperARC, HiperDSP, 16 Meg NMC, and TCM for > >Windows, HP and Solaris (still no Linux). The link for the new > >HiperARC Manager software is broken or the file isn't out there yet. > > > >Since I still have older equipment (quads and dual-T1), I probably > >won't be upgrading right away. The compatibility matrix had not yet > >been updated. > > > >So, who wants to be first? > > > >Wayne Barber > >Coastal Telco Services > > > >- > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old > messages send > > "help" to the same address. Do not use quotes in your message. > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1