- USR-TC - mailman.xmission.com

(usr-tc) Secondary radius
by John Mies 11 Mar '01

11 Mar '01

Today my primary radius failed, and the ARC didn't switch over to the secondary automatically. What command setting would have been blown away and have to be re-entered? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Basic TC Question
by Brad Gass 09 Mar '01

09 Mar '01

You'll have to forgive me for being a tad new to the USR gear. I've worked with Ariel and Multitech, but this is my first exposure to any USR TC equipment. I've got a chance to buy a 48 port v.34 TC chassis (12 quad v.34 modems, NetServer PRI, Dual PRI NAC, Management Card, etc), but my question is pretty basic - Is a TC chassis configured and equipped for PRI also useable in a channelized T1 environment (non-PRI)? I know some equipment will work with either/or, and others will work with one or the other and not both. I don't have PRI available at the POP I've got in mind for this gear, and since it's super-rural, v.90 is completely worthless. That's why v.34 digital (and fully managed) is ideal. I'm also not totally sure everything I need is in this chassis, but I can deal with that later, after I pester 3Com in the morning to correct the links to all their documentation! Thanks in advance. Brad - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 8

(usr-tc) add ip defaultroute command
by Steve Johnson 05 Mar '01

05 Mar '01

I am trying to change the default route for my USR Total Control chassie. So I enter the command like this add ip deFAULTROUTE gaTEWAY 208.201.224.230 and I get this message back ERROR - Specified gateway is not on a directly connected network. Now this address is on the exact same netowork as the box. Here is what show ip network shows. SHOW IP NETWORK ip SETTINGS: Interface: eth:1 Network Address: 208.201.224.181/C Frame Type: ETHERNET_II Status: ENABLED Reconfigure Needed: FALSE Mask: 255.255.255.0 Station: 208.201.224.181 Broadcast Algorithm: IETF Max Reassembly Size: 3464 WAN Type: N/A Remote IP Address: 0.0.0.0 IP Routing Protocols: RIPV2 OSPF IP Routing Metric: 1 RIP Interface Export Metric: 0 IP RIP Routing Policies: SEND_ROUTES SPLIT_HORIZON FLASH_UPDATE SEND_COMPAT RIPV1_RECEIVE RIPV2_RECEIVE IP RIP Authentication Key: Also the current default route is this nas24>> list ip defAULTROUTE CONFIGURED DEFAULT ROUTERS Address Mask Gateway Metric State 0.0.0.0 0.0.0.0 208.201.224.1 1 ENABLED What is weird is I deleted this route once and then tried to add the same exact default route and got the same error. I am assuming that I have entered the syntax incorrectly. Can someone clue me in here =) Thanks -Steve -- Steve Johnson - linuxnut(a)sonic.net Sonic.net, Inc. System Administrator 300 B Street #100 707.522.1000 (Voice) Santa Rosa, CA 95404 707.547.2199 (Fax) http://www.sonic.net/ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Date: Mon, 5 Mar 2001 16:51:34 -0500
by Brian Becker 05 Mar '01

05 Mar '01

With ours, it usually means they attempted to do chap. SET PPP AUTHENTICATION_PREFERENCE PAP Brian Brian Becker President, Poplar Bluff Internet, Inc. (www.semo.net) Home of TotallyFabricated.com Software: Total Scrutinizer (www.TotalScrutinizer.com) - Tech Support Just Got Easier! WebGabber (www.WebGabber.com) - html-based Chat Software -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jorge Lozano Sent: Monday, March 05, 2001 3:45 PM To: usr-tc Subject: (usr-tc) Date: Mon, 5 Mar 2001 16:51:34 -0500 Hi everybody! I was looking in my hiper ARC, and when I try to view the PPP call events, I have a lot of messages like: PPP Auth Failed, PAP Mismatch. PPP link down to . PPP Auth Failed, PAP Mismatch. PPP link down to . anybody know what means this? Thkans, Jorge Lozano <jorge(a)andinet.com> NA and ISSO Andinet On Line <http://www.andinet.com> The only way to predict the future is... to create it! - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Date: Mon, 5 Mar 2001 16:51:34 -0500
by Jorge Lozano 05 Mar '01

05 Mar '01

Hi everybody! I was looking in my hiper ARC, and when I try to view the PPP call events, I have a lot of messages like: PPP Auth Failed, PAP Mismatch. PPP link down to . PPP Auth Failed, PAP Mismatch. PPP link down to . anybody know what means this? Thkans, Jorge Lozano <jorge(a)andinet.com> NA and ISSO Andinet On Line <http://www.andinet.com> The only way to predict the future is... to create it! - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Mac Problems with Open Transport 1.1.x
by Randy Cosby 05 Mar '01

05 Mar '01

Here is a note from my Mac tech. He's seeing strange problems with our older Mac users, where the first time they log on, they don't get in. After that, they're fine until they reboot. I think it's been going on for a long time, but he just got very annoyed about it last week. Our radius logs show that the user DOES authenticate successfully. --- This is true for any Macintosh (68k or PPC) running Open Transport (version 1.1.1 and 1.1.2). The first time they dial-up after every boot, they get an authentication failed error. It is successful every time after that until they restart the computer again, where it fails the first time again. This is generally only a problem on macs running System 7.5 to 7.6.1. The highest that can be installed on 68k machines is System 7.6.1. If they are running System 7.1, they need to install MacTCP, which does not have the problem. If they have System 8.1 or higher, Open Transport 1.3.1 can be installed (I believe I noticed that Open Transport 1.3.0 had the same problem as 1.1.1 and 1.1.2, but I don't have another computer to verify that), which also does not have the problem. It is a problem that exists on macs running Mac OS 8.0, because you can't install Open Transport 1.3 or higher on Mac OS 8.0, but you can update Mac OS 8.0 to 8.1, and then install Open Transport 1.3, then update to 1.3.1 to correct the problem. --- HiperARC 4.1.59-6 HiperDSP's running 2.0.60 Ideas? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Dead HiperDSPs with one Utilization LED
by Kevin Hemsley 01 Mar '01

01 Mar '01

I have two HiperDSP card sets which TCM doesn't recognize. After a reboot, one Utilization LED lights up - the 4th LED from the bottom is amber. Also the Run/Fail LED is red. These cards were operating fine as hot spares in a different chassis, but after moving to another chassis, they wouldn't boot. Moving the cards back to the original chassis results in the same problem. I have tried reloading the software via the AUX port which was successful, except the same problem is happening after the software reload. Any ideas? ---------------------------------- Kevin Hemsley Systems Engineer Microserv Computer Technologies, Inc. kev(a)ida.net KB7TYA - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) TC NetServer v34 analog """" help me pleasee"""" someone""""""""
by eric＠dol.net 28 Feb '01

28 Feb '01

I don't think this is possible. I remember a discussion on this before and the answer was that it could not be done. I had the same situation at one time where I did not have a contiguous block of ip left to assign to the netserver. My solution was to reorganize my address space so that I did have a block of addresses to give to the netserver card from which it could pull. Maybe you could use nat and not use real ip addresses for the netserver card. I never went that route but it seems like a solution you could use. eric At 11:18 AM 3/1/01 -0300, you wrote: > >Humm.. okss.. >hey thankss..... >Let me try explain what i need.. > >I need do each modem in Tcontrol have the own fixed ip. >Like >interface mod:1 ip xxx.xxx.xxx.1 >interface mod:2 ip xxx.xxx.xxx.2 >........... >.......... >......... >interface mod:16 ip xxx.xxx.xxx.16 > >Not each user have the own ip. > >My situation is, i have 100+ users in radius.. others RAS and 2 TC analog. >but dont have one continuous pool of ips to setup in this TC's .. at now in >test is working in ip pools to modems, but i need do each modem work in >specific ip.. >I hope that now my situation is more "Clear"..... >in ras i know how do thiss.., but in analog tcontrol nooo.. sometimee.. in >any place of the net, i find a guy using this TC V.34 and the modems in >fixed ips mode.. but i lost how do thiss.. > >Thanks again... > > >-----Original Message----- >From: owner-usr-tc(a)lists.xmission.com >[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Charles Sprickman >Sent: Monday, February 26, 2001 3:39 AM >To: usr-tc(a)lists.xmission.com >Subject: RE: (usr-tc) TC NetServer v34 analog > > >Hi, > >If you already have Radius up and running, just add an IP in the "users" >file: > >--- >someuser Auth-Type = System > Service-Type = Framed-User, > Framed-Protocol = PPP, > Framed-Netmask = 255.255.255.255, > Framed-IP-Address = 10.10.10.193, > Session-Timeout = 0, > Idle-Timeout = 64000 >----- > >Auth-Type = System means to pull the info from your system password file. >The rest just lets you set more paramaters... This isn't really USR/3Com >specific... > >Charles > >| Charles Sprickman | Internet Channel >| INCH System Administration Team | (212)243-5200 >| spork(a)inch.com | access(a)inch.com > >On Mon, 26 Feb 2001 list(a)angelnet.com.br wrote: > >> Heii Helloo.. >> Ho yea.. the TC is working fine i have the manual ( idowloaded from 3com >> sitee ), but in manual only speak how set fixed ips to use with the >> internal user tables ( well, if i read all manuals ok and undestand . >> heeh).. >> Now my TC is working in a pool ip modes.. without problems ( well only the >> standart problems of this TC )... >> Hamm, sorry iam using the Radius .. and yeahh i have one teminal cable .. >> Pleasee can you help me? >> >> -----Original Message----- >> From: albert [mailto:emmanuel@mwt.net] >> Sent: Monday, February 26, 2001 1:36 AM >> To: list(a)angelnet.com.br >> Subject: RE: (usr-tc) TC NetServer v34 analog >> >> >> Hello,... >> >> first may i ask if you have a set of manuals for the unit? >> and a USR consol cable? >> >> albert >> > -----Original Message----- >> > From: owner-usr-tc(a)lists.xmission.com >> > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of >> > list(a)angelnet.com.br >> > Sent: Monday, February 26, 2001 10:15 AM >> > To: usr-tc(a)xmission.com >> > Subject: (usr-tc) TC NetServer v34 analog >> > >> > >> > Hello Peoples?? >> > Well sorry if my question is out of this list, but i need some help, >and >> > 3com dont help me.. NEVER ... >> > Well i need ( if possible ) configure my Total Control Netserver >> > V.34 Analog >> > to use with fixed IP's ...... >> > Pleaseeee someone help mee... is urgentt...... >> > My ICQ 14484847 WEGA >> > >> > >> > - >> > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> > with "unsubscribe usr-tc" in the body of the message. >> > For information on digests or retrieving files and old messages send >> > "help" to the same address. Do not use quotes in your message. >> > >> >> >> - >> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> with "unsubscribe usr-tc" in the body of the message. >> For information on digests or retrieving files and old messages send >> "help" to the same address. Do not use quotes in your message. >> > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) TC NetServer v34 analog """" help me pleasee"""" someone""""""""
by eric＠dol.net 28 Feb '01

28 Feb '01

At 11:18 AM 3/1/01 -0300, you wrote: > >Humm.. okss.. >hey thankss..... >Let me try explain what i need.. > >I need do each modem in Tcontrol have the own fixed ip. >Like >interface mod:1 ip xxx.xxx.xxx.1 >interface mod:2 ip xxx.xxx.xxx.2 >........... >.......... >......... >interface mod:16 ip xxx.xxx.xxx.16 > >Not each user have the own ip. > >My situation is, i have 100+ users in radius.. others RAS and 2 TC analog. >but dont have one continuous pool of ips to setup in this TC's .. at now in >test is working in ip pools to modems, but i need do each modem work in >specific ip.. >I hope that now my situation is more "Clear"..... >in ras i know how do thiss.., but in analog tcontrol nooo.. sometimee.. in >any place of the net, i find a guy using this TC V.34 and the modems in >fixed ips mode.. but i lost how do thiss.. > >Thanks again... > > >-----Original Message----- >From: owner-usr-tc(a)lists.xmission.com >[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Charles Sprickman >Sent: Monday, February 26, 2001 3:39 AM >To: usr-tc(a)lists.xmission.com >Subject: RE: (usr-tc) TC NetServer v34 analog > > >Hi, > >If you already have Radius up and running, just add an IP in the "users" >file: > >--- >someuser Auth-Type = System > Service-Type = Framed-User, > Framed-Protocol = PPP, > Framed-Netmask = 255.255.255.255, > Framed-IP-Address = 10.10.10.193, > Session-Timeout = 0, > Idle-Timeout = 64000 >----- > >Auth-Type = System means to pull the info from your system password file. >The rest just lets you set more paramaters... This isn't really USR/3Com >specific... > >Charles > >| Charles Sprickman | Internet Channel >| INCH System Administration Team | (212)243-5200 >| spork(a)inch.com | access(a)inch.com > >On Mon, 26 Feb 2001 list(a)angelnet.com.br wrote: > >> Heii Helloo.. >> Ho yea.. the TC is working fine i have the manual ( idowloaded from 3com >> sitee ), but in manual only speak how set fixed ips to use with the >> internal user tables ( well, if i read all manuals ok and undestand . >> heeh).. >> Now my TC is working in a pool ip modes.. without problems ( well only the >> standart problems of this TC )... >> Hamm, sorry iam using the Radius .. and yeahh i have one teminal cable .. >> Pleasee can you help me? >> >> -----Original Message----- >> From: albert [mailto:emmanuel@mwt.net] >> Sent: Monday, February 26, 2001 1:36 AM >> To: list(a)angelnet.com.br >> Subject: RE: (usr-tc) TC NetServer v34 analog >> >> >> Hello,... >> >> first may i ask if you have a set of manuals for the unit? >> and a USR consol cable? >> >> albert >> > -----Original Message----- >> > From: owner-usr-tc(a)lists.xmission.com >> > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of >> > list(a)angelnet.com.br >> > Sent: Monday, February 26, 2001 10:15 AM >> > To: usr-tc(a)xmission.com >> > Subject: (usr-tc) TC NetServer v34 analog >> > >> > >> > Hello Peoples?? >> > Well sorry if my question is out of this list, but i need some help, >and >> > 3com dont help me.. NEVER ... >> > Well i need ( if possible ) configure my Total Control Netserver >> > V.34 Analog >> > to use with fixed IP's ...... >> > Pleaseeee someone help mee... is urgentt...... >> > My ICQ 14484847 WEGA >> > >> > >> > - >> > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> > with "unsubscribe usr-tc" in the body of the message. >> > For information on digests or retrieving files and old messages send >> > "help" to the same address. Do not use quotes in your message. >> > >> >> >> - >> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> with "unsubscribe usr-tc" in the body of the message. >> For information on digests or retrieving files and old messages send >> "help" to the same address. Do not use quotes in your message. >> > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) TC NetServer v34 analog """" help me pleasee"""" someone""""""""
by list＠angelnet.com.br 28 Feb '01

28 Feb '01

Humm.. okss.. hey thankss..... Let me try explain what i need.. I need do each modem in Tcontrol have the own fixed ip. Like interface mod:1 ip xxx.xxx.xxx.1 interface mod:2 ip xxx.xxx.xxx.2 ........... .......... ......... interface mod:16 ip xxx.xxx.xxx.16 Not each user have the own ip. My situation is, i have 100+ users in radius.. others RAS and 2 TC analog. but dont have one continuous pool of ips to setup in this TC's .. at now in test is working in ip pools to modems, but i need do each modem work in specific ip.. I hope that now my situation is more "Clear"..... in ras i know how do thiss.., but in analog tcontrol nooo.. sometimee.. in any place of the net, i find a guy using this TC V.34 and the modems in fixed ips mode.. but i lost how do thiss.. Thanks again... -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Charles Sprickman Sent: Monday, February 26, 2001 3:39 AM To: usr-tc(a)lists.xmission.com Subject: RE: (usr-tc) TC NetServer v34 analog Hi, If you already have Radius up and running, just add an IP in the "users" file: --- someuser Auth-Type = System Service-Type = Framed-User, Framed-Protocol = PPP, Framed-Netmask = 255.255.255.255, Framed-IP-Address = 10.10.10.193, Session-Timeout = 0, Idle-Timeout = 64000 ----- Auth-Type = System means to pull the info from your system password file. The rest just lets you set more paramaters... This isn't really USR/3Com specific... Charles | Charles Sprickman | Internet Channel | INCH System Administration Team | (212)243-5200 | spork(a)inch.com | access(a)inch.com On Mon, 26 Feb 2001 list(a)angelnet.com.br wrote: > Heii Helloo.. > Ho yea.. the TC is working fine i have the manual ( idowloaded from 3com > sitee ), but in manual only speak how set fixed ips to use with the > internal user tables ( well, if i read all manuals ok and undestand . > heeh).. > Now my TC is working in a pool ip modes.. without problems ( well only the > standart problems of this TC )... > Hamm, sorry iam using the Radius .. and yeahh i have one teminal cable .. > Pleasee can you help me? > > -----Original Message----- > From: albert [mailto:emmanuel@mwt.net] > Sent: Monday, February 26, 2001 1:36 AM > To: list(a)angelnet.com.br > Subject: RE: (usr-tc) TC NetServer v34 analog > > > Hello,... > > first may i ask if you have a set of manuals for the unit? > and a USR consol cable? > > albert > > -----Original Message----- > > From: owner-usr-tc(a)lists.xmission.com > > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of > > list(a)angelnet.com.br > > Sent: Monday, February 26, 2001 10:15 AM > > To: usr-tc(a)xmission.com > > Subject: (usr-tc) TC NetServer v34 analog > > > > > > Hello Peoples?? > > Well sorry if my question is out of this list, but i need some help, and > > 3com dont help me.. NEVER ... > > Well i need ( if possible ) configure my Total Control Netserver > > V.34 Analog > > to use with fixed IP's ...... > > Pleaseeee someone help mee... is urgentt...... > > My ICQ 14484847 WEGA > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0