- USR-TC - mailman.xmission.com

Re: (usr-tc) Busy out causes "number .. been disconnected"
by Kirk Mitchell 23 Feb '01

23 Feb '01

At 11:37 PM 2/22/01 -0500, drernst(a)kirkwood.hoosier.net wrote: >Running PRIs on hiperDSPs with a hiperarc, we have discovered a very very >strange thing. It seems that if we "busy out" any of the channels on >the PRI in TCM, the telco give the famous "The number you have reached, >X X X - X X X X has been disconnected" ???? I've got limited data, I >admit, because we naturally don't want this happening much. But anyone >have any thoughts about this? I'm very surprised that there's anything we >can do on our end that would make the telco give that message. Sounds like they don't have the hunting set properly. Any time you've got DSP modems busied out, the calls should roll on to the next available channel in the hunt group. Ever had busies when all of your modems weren't full? This would be another symptom of a hunting problem. -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Seperating Authentication / Accounting
by Jamie Orzechowski 21 Feb '01

21 Feb '01

Hello ... I have 2 radius servers a and b A -> Authentication B -> Accounting What I am trying to do it have each server be a backup for each other so primary authentication (A) has a backup of B primary accounting (B) has a backup of A I have configured these but what is happening is that request for accounting / authentication are being distributed among both servers ... I only want requests to be sent to the backup server if the main is down ... any ideas how to do this?

1 0

(usr-tc) Seperatating authe and acct
by Jamie Orzechowski 21 Feb '01

21 Feb '01

Hello ... I have 2 radius servers a and b A -> Authentication B -> Accounting What I am trying to do it have each server be a backup for each other so primary authentication (A) has a backup of B primary accounting (B) has a backup of A I have configured these but what is happening is that request for accounting / authentication are being distributed among both servers ... I only want requests to be sent to the backup server if the main is down ... any ideas how to do this?

1 0

(usr-tc) WTB: 70A power supply
by Brian 21 Feb '01

21 Feb '01

If anyone has a 70A power supply they are selling, I am looking for one...........say $100? Brian ----------------------------------------------- I'm buying used CISCO gear!! email me for a quote Brian Feeny e:signal@shreve.net CCNP+Voice/ATM/Security p:318.222.2638x109 CCDP f:318.221.6612 Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) MPIP
by Boian Iliev Jordanov 21 Feb '01

21 Feb '01

Dear all, Consider the following scenario - 2HiperARC on chassis with multiple HiperDSP's on them First ARC is MPIP Server and client to itself and second is client to first. Both of them running ntp. When ISDN call is terminated i mean isdn/bri and user initiated 2 sessions with MPPP, in my radius i seen something that encourage me, a user have accounted 3 sessions one of them with Framed-IP-Address set to 0.0.0.0 and originated from Second ARC (Running client MPIP) and others two with real ips and originated from First ARC. This is how i see it in my radwho. #205 user_x ISDN S6105 Tue 22:08 tch-1.Sofia.0rbitel.net 212.95.170.189 #206 user_x ISDN S2066 Tue 22:08 tch-2.Sofia.0rbitel.net 0.0.0.0 #207 user_x ISDN S1564 Tue 21:59 tch-1.Sofia.0rbitel.net 212.95.170.189 Shall i consider this as a bug ? Does anybody run in same conditions and Is this a normal ? -- Boian Iliev Jordanov SNE Orbitel - the Internet company tel. +359-2-9370723 http://www.orbitel.bg - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) New to list with 3 questions
by mark ross 18 Feb '01

18 Feb '01

Hi, Does anyone know if there is any difference between the "old style" and the "new style, with intergrated fan tray" TC 1000 chassis ? Also One of my Netserver cards reports "enhanced packet bus" when I do the "show version command" any idea what the differnence is ? Anyone have a x2 key or enabled NMC they can part with ? thanks - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

RE: (usr-tc) Power supplies
by Mark E. Levy 15 Feb '01

15 Feb '01

> Hi list, > > Is there any way to convert a DC chassis to AC? Or does > anyone have any > 70amp AC chassis for sale? Just replace the DC supplies with the AC version. The chassis are the same either way. --------------------------------------------------------------------- Mark E. Levy, President FSInet, Inc. | System Management Associates, Inc. 800-827-6085 x202 | 847-291-1550 x202 847-753-6832 fax | 847-291-3866 fax www.fsi.net | www.sysman-inc.com mark(a)fsi.net | levy(a)sysman-inc.com --------------------------------------------------------------------- - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Power supplies
by netboss＠cyberport.net 15 Feb '01

15 Feb '01

Hi list, Is there any way to convert a DC chassis to AC? Or does anyone have any 70amp AC chassis for sale? Thanks, Gary - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Radius Errors
by Kevin Hemsley 15 Feb '01

15 Feb '01

I'm getting many of these errors from one of my HiperArcs in my radius.log file. Any ideas: Mon Feb 5 06:54:56 2001: Error: Accounting: logout: login entry for NAS tc-if1 port 533 not found Mon Feb 5 07:39:31 2001: Error: Accounting: logout: login entry for NAS tc-if1 port 534 not found Mon Feb 5 07:48:19 2001: Error: Accounting: logout: login entry for NAS tc-if1 port 533 not found Mon Feb 5 08:06:42 2001: Error: Accounting: logout: login entry for NAS tc-if1 port 534 not found Mon Feb 5 08:11:34 2001: Error: Accounting: logout: login entry for NAS tc-if1 port 533 not found Mon Feb 5 08:29:21 2001: Error: Accounting: logout: login entry for NAS tc-if1 port 534 not found ---------------------------------- Kevin Hemsley Systems Engineer Microserv Computer Technologies, Inc. kev(a)ida.net KB7TYA - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) HiPer DSP MultiSpan cards
by Ronald Kushner 15 Feb '01

15 Feb '01

Had anyone out there purchased the new HiPer DSP MultiSpan cards? I'm at the point where I'm going to have to buy new hardware and the $3k savings over HiPer DSPs is attractive. Are the modems at least as good or better than HiPer DSPs? I did not anticipate purchasing more hardware due to churn and other options, but the way things are going I'm going to need to purchase more ports, so I haven't kept up with what's what. In the last three months I've watch our usage grow at an alarming rate. Purchasing a HiPer DSP bundle doesn't seem to make any sense at the way things are going. I have a chassis that running year old ARC and DSP code, any problems there too? I do have 128MB ARCs. -Ron GLISnet, Inc. 810/939.9885 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 3