HiperDSP with E1/R2 code v3.1.7 suddenly went dead after a power cycle in a
chassis ( scheduled maintenance shutdown ). RN/FL LED is red with some amber
LED in the utilization LED, so most definitely this module is dead. Tried to do
a console download, the card accepts the download but fails on the boot-up
process. Ok now its really a hardware failure, looking to take some positive
actions in this situations, can anybody in this list tell me the meaning of this
error message/code? Or is there anybody from Commworks looking in this mailing
list provide me an answer, it will be a most welcome one. Here's the error
code:
!!----------> SDL2 for the PPC403 <------------!!
__ Enter Download Trigger __
Flash Image Has Valid CRC, Loading Image....
Diagnostic Power-Up Failure
Manufacturing Info -> 1AAA13M0
Mode/Env -> 1/0
Fault Code -> 0-8-26-1
Expected Data -> f000000c
Received Data -> 7000000c
Text Message -> Address Equals Data Test Failure
Info Message -> Second read failed. Hard error indicated.
--
Best regards,
Gen
==================================
Gen Camiling
Chief Technical Officer
International Micro Village, Inc. PHILIPPINES
(63)(2) 7512130
mailto:gcamiling@imvi.com.ph
==================================
