- USR-TC - mailman.xmission.com

changing RADIUS ports
by Gen Camiling 02 Sep '02

02 Sep '02

Hello there Patrick, Try these commands: set authentic xxx.xxx.xxx.xxx/1812 set accounting xxx.xxx.xxx.xxx/1813 -- Best regards, Gen ================================== Gen Camiling Chief Technical Officer International Micro Village, Inc. PHILIPPINES (63)(2) 7512130 http://www.imvi.com.ph mailto:gcamiling@imvi.com.ph ==================================

1 0

Disable Services
by Noriega, Alejandro 02 Sep '02

02 Sep '02

Hello guys, anyone know how I can disable the services which open this ports? [zim]:/home/zim> nmap -sU HiPerARC1 Starting nmap V. 2.54BETA34 ( www.insecure.org/nmap/ ) (The 1450 ports scanned but not shown below are in state: closed) Port State Service 67/udp open dhcp 68/udp open dhcpclient 69/udp open tftp 123/udp open ntp 161/udp open snmp 434/udp open mobileip-agent 500/udp open isakmp 520/udp open route 2049/udp open nfs I disable tftp, ntp and filter snmp but I have no idea how to close/disable the another ports. zim

1 0

ARC not releasing IP addresses
by MacDonald, James 30 Aug '02

30 Aug '02

Hi All, We have 1 hyperarc that seems to have a problem where it can not release IPs previously assigned properly. It sometimes does and sometimes doesn't ... eventually the arc runs out of IP addresses to assign and spews the following error: Aug 15 09:02:12 9L102PDI-H1 At 13:01:46, Facility "IP", Level "CRITICAL":: ip_fwd_get_opt: no IP address available for dynamic address assignment As you can see, the IP addresses (162 of them) are completely used up and there are only 7 users online. We don't think this is a code specific issue as we run this code on all ARCs (about 250 of them) and this is the only one getting these errors ... it may be hardware related, but in my experience these types of issues are generally code ... so, I'm at a cross-roads so to speak. Has anyone else run into this and found a workaround? BTW: we can find only 2 ways to correct the issue, rebooting or removing the IP Pools and adding them back ... we generally reboot as that is much quicker and less error prone. System Version: V5.0.83/Non-Encr 9L102PDI-H1> list ip pools IP ADDRESS POOLS Name Address Size InUse State Route Unused Priority Status 9L102-H1-POOL1 216.123.143.17/29 6 6 PUBLIC AGGREGATE 0 1 ACTIVE 9L102-H1-POOL2 216.123.140.65/27 30 30 PUBLIC AGGREGATE 0 1 ACTIVE 9L102-H1-POOL3 216.123.132.1/25 126 126 PUBLIC AGGREGATE 0 1 ACTIVE 9L102PDI-H1> list conNECTIONS CONNECTIONS Start Start IfName User Name Type DLL Date Time slot:1/mod:4 xxxxxx DIALIN PPP 14-AUG-2002 21:14:41 slot:1/mod:5 xxxxxx DIALIN PPP 15-AUG-2002 05:13:22 slot:1/mod:11 xxxxxx DIALIN PPP 15-AUG-2002 13:55:43 slot:1/mod:13 xxxxxx DIALIN PPP 15-AUG-2002 03:28:04 slot:1/mod:16 xxxxxx DIALIN PPP 15-AUG-2002 14:04:17 slot:1/mod:19 xxxxxx DIALIN PPP 15-AUG-2002 10:19:32 slot:1/mod:21 xxxxxx DIALIN PPP 15-AUG-2002 08:59:12 9L102PDI-H1> Thanks, James MacDonald, CCNP Senior Platform Manager, IP Network Operations AT&T Canada Corp. 370 King St W., 6th Floor Toronto, ON M5V1J9 Ph: 416-204-5793 Fx: 416-204-5744 Emergency: 416-204-5700 (NMC Hotline) Email: james.macdonald(a)attcanada.com

10 21

Anyone have a bad Hiper NMC?
by Joel - Fox Computers 29 Aug '02

29 Aug '02

Anyone have a bad Hiper NMC and happen to have a spare NIC for it? Email me. Thanks, Joel

1 0

bandwidth restriction per slot
by Kancha . 29 Aug '02

29 Aug '02

Hi: I'd likt to restrict bandwidth per slot. who can this be done ?? __________________________________________________ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com

1 0

RE: [USR-TC] Netserver configuration HELP.
by Fred Ebnereza 29 Aug '02

29 Aug '02

I made the cable but it didn't work. FYI it is an old TC100 (I think) -----Original Message----- From: Fred Ebnereza [mailto:febnereza@daston.com] Sent: Thursday, August 29, 2002 10:07 AM To: 'usr-tc(a)mailman.xmission.com' Subject: RE: [USR-TC] Netserver configuration HELP. thank a lot I'll test it today. Thanks again Fred -----Original Message----- From: RickL(a)solunet.com [mailto:RickL@solunet.com] Sent: Wednesday, August 28, 2002 5:04 PM To: usr-tc(a)mailman.xmission.com Subject: RE: [USR-TC] Netserver configuration HELP. Fred, You need the TC1000 Console cable (PN 3C05-8812-00). Otherwise, make one: RJ-45 to DB-9 Pinout RJ-45 DB-9 3 1 6 2 5 3 2 4 4 5 3 6 7 7 8 8 Sincerely, Rick Team Solunet -----Original Message----- From: Fred Ebnereza [mailto:febnereza@daston.com] Sent: Wednesday, August 28, 2002 4:31 PM To: 'usr-tc(a)mailman.xmission.com' Subject: [USR-TC] Netserver configuration HELP. I'm trying to configure my NetServer and NMC board in USR-TC. I don't have the console cable that comes with the device. I'm using a null-modem cable and the com port adapter I use for my Cisco router. when I run HyperTerminal with 9600,1,8,n,1,hardware I can't get connected to neither of the board but while cable is connected if I reboot the box (USR-TC) I see the login prompt on hyperterminal session for the NetServer or NMC but I can't type anything to login as !root I reset the board (switch#5) but still is the same . Any clue? please Fred _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: [USR-TC] Radius Port
by RickL＠solunet.com 29 Aug '02

29 Aug '02

Thanks for Clearing that up Tom...you should know (long-timer)!! So, not even 3.8.1 for the Netserver will allow this? (anyone?). I took some bad notes I guess. My apologies for the misinformation. Rick Team Solunet -----Original Message----- From: Thomas C Kinnen [mailto:tkinnen@lucentradius.com] Sent: Wednesday, August 28, 2002 5:24 PM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] Radius Port > Weird. That's ComOS (Livingston), and it's always supported alternate port > numbers on PM2's and Pm3's. > Only in ComOS 3.8 and above. Radius ports are hard coded in previous versions. The old USR license for ComOS was before those versions. Tom -- Thomas C Kinnen -RADIUS Engineer - LUCENT Technologies INS NavisRadius Forums: http://www.lucentradius.com/cgi-bin/dcforum/dcboard.cgi "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

RADIUS ports
by Gen Camiling 29 Aug '02

29 Aug '02

Hello there Scott, >Perhaps that's my problem. That command didn't seem >to work. It looks like the only argument it wants >besides the IP is the secret. Try this command: set authentic <ip address/UDP port> goes the same thing with accounting servers -- Best regards, Gen ================================== Gen Camiling Chief Technical Officer International Micro Village, Inc. PHILIPPINES (63)(2) 7512130 http://www.imvi.com.ph mailto:gcamiling@imvi.com.ph ==================================

2 1

RE: [USR-TC] Netserver configuration HELP.
by Fred Ebnereza 29 Aug '02

29 Aug '02

thank a lot I'll test it today. Thanks again Fred -----Original Message----- From: RickL(a)solunet.com [mailto:RickL@solunet.com] Sent: Wednesday, August 28, 2002 5:04 PM To: usr-tc(a)mailman.xmission.com Subject: RE: [USR-TC] Netserver configuration HELP. Fred, You need the TC1000 Console cable (PN 3C05-8812-00). Otherwise, make one: RJ-45 to DB-9 Pinout RJ-45 DB-9 3 1 6 2 5 3 2 4 4 5 3 6 7 7 8 8 Sincerely, Rick Team Solunet -----Original Message----- From: Fred Ebnereza [mailto:febnereza@daston.com] Sent: Wednesday, August 28, 2002 4:31 PM To: 'usr-tc(a)mailman.xmission.com' Subject: [USR-TC] Netserver configuration HELP. I'm trying to configure my NetServer and NMC board in USR-TC. I don't have the console cable that comes with the device. I'm using a null-modem cable and the com port adapter I use for my Cisco router. when I run HyperTerminal with 9600,1,8,n,1,hardware I can't get connected to neither of the board but while cable is connected if I reboot the box (USR-TC) I see the login prompt on hyperterminal session for the NetServer or NMC but I can't type anything to login as !root I reset the board (switch#5) but still is the same . Any clue? please Fred _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

RE: [USR-TC] analog/busy tone/working ok after checking dialtone
by Fred Ebnereza 29 Aug '02

29 Aug '02

Check your modems configuration if it is happening on some specific modems check their configuration if they are the same as the other switch your phone line and find out if the problem still on the same modem/s. My guess is you have some bad modems that don't reset after disconnections. Have fun -----Original Message----- From: pankaj [mailto:pankaj@worldgatein.net] Sent: Tuesday, August 27, 2002 5:51 AM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] analog/busy tone/working ok after checking dialtone Hi folks, I have nasty senerio, I have many analog lines. 3com(tc1000) Now some of them are behaving nasty. Once or twise user able to login properly in that line. Now in some lines I am geeting busy tone, evenif line is free(i.e no user loged in). Now I unplug that line from modem , and leave it in air, but still I got busy tone on that number, Than I pluged it in to phone-intrument(handset) and than also I got busy tone on that number. now i pickeup the receiver and check the dialtone.Dialtone was ok, after checking dial tone I was able to get ring on that number, and user is also able to login. The same trouble I faced in many lines in three-fine quards-modems. My telco people come and check earthing and all but seems everything ok. Any clue will help me out ?? Thanks pankaj _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

4 5