February 2003 - USR-TC - mailman.xmission.com

Problems w/ a Total Control
by Chris Hamersly 12 Feb '03

12 Feb '03

Hello everyone. I have a US Robotics Total Control Enterprise Network Hub that is having some issues. People dialing in tend to get weird errors, like 619 and ppp errors. Also, they get disconnected after being connected for a short period of time. The only thing that helps is rebooting, but you have to do that several times for it to pick up calls. Any help yall could give would be appreciated. Thanks in advance. Chris Hamersly

2 1

FS: Tons of Hiper Equipment
by sky1 12 Feb '03

12 Feb '03

Howdy folks! It me again. Latest Hiper Equipment pricing: Fully Loaded Hiper Bundles w/: (14) Hiper DSP's (2) Hiper ARC's 128Mb version (1) Hiper NMC (2) 130 Amp AC power ---BLUE Labeled chassis with fan assembly all this for $4500.00 (6) Six month warranty.. Can flash to the Latest Code if you want it. ---Many people on this list can verify that these units are in pristine condition--- Individual Card Prices: Hiper ARC sets 128Mb version....$125.00 each Hiper DSP sets $235.00 each (minimum of 2 units at this price) Hiper NMC's $550.00 each ---Also have 130 Amp and 70 Amp AC power supplies if anyone needs them. Thanks for your time, Shannan Young SouthWest Data Technology, Inc. 972-739-7010 972-739-7013 (Fax) sky1(a)airmail.net www.swdt.com

1 0

What's the difference between ARC and HARC???
by Adam Barnhill 12 Feb '03

12 Feb '03

Ram can be swapped, but I'm pretty sure the Flash is hardwired. -- Adam Barnhill Support Engineer, TotallyFabricated.com Information Technology Engineer, Poplar Bluff Internet, Inc. / Semo.net P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114, <http://www.semo.net/> Home of TotallyFabricated.com the creators of Total Scrutinizer

1 0

What's the difference between ARC and HARC???
by Adam Barnhill 12 Feb '03

12 Feb '03

What version of code are you running on the (H)ARC? The HiperARC 128/16 version shows something like this: HiPer>> show board settinGS Product Code: 323842 Hardware Version: 1.0.2 Kernel Version: 0x0000002d Software Version: V5.1.99/Non-Encr Total System Dynamic Memory:128 MB Total System Flash Memory: 16 MB CPU Type: PPC 603ev CPU Speed(Mhz): 200 NIC Card ID: 19 NIC Card Name: Dual DEC42 10/100 Ethernet NAC Card ID: 48 NAC Card Name: HiPer Access Router NAC I'm pretty sure you have a Hiper ARC. Even if it is the 64/8 version. -- Adam Barnhill Support Engineer, TotallyFabricated.com Information Technology Engineer, Poplar Bluff Internet, Inc. / Semo.net P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114, <http://www.semo.net/> Home of TotallyFabricated.com the creators of Total Scrutinizer

2 1

DMS-100 and TC
by Adam Barnhill 12 Feb '03

12 Feb '03

>I dont do RIP/OSPF/IPX. I just use IP for dialup. >So why on commworks's site its said that for installing TCS 4.5/4.7 I need at least 128MbRAM and 16Mb flash? You are required to have a 128/16 HiperARC because the software to flash and run 4.5/4.7 is too large to put on a 64/8 HiperARC. >What about flash? >I have just 8Mb of flash. >Is it enough for upgrading to TCS4.5/4.7 ? NO. >And one more question: >What happens if I upgrade DSP cards to TCS 4.5/4.7 and dont upgrade HARC and HNMC? If you have a HiperNMC then buy a 128/16 HiperARC (from this list) for about $250 and upgrade all the cards to the same TCS version. >Will dialup (dialin) work ok? Most likely when you reboot the DSPs after updating the code, they will not come up, but even if they do, I do not believe they will function properly. Note: Once you flash the DSPs to TCS4.5 a special procedure is required to downgrade back to TCS 4.3, otherwise you could damage your DSPs. >Will my TCM see and be able to configure that DSP cards? More than likely once you update the cards past the TCS version of your HNMC, you will only see Question Marks. You will definitely not be able to program the cards without updating the HNMC to the same TCS version as the DSPs. -- Adam Barnhill Support Engineer, TotallyFabricated.com Information Technology Engineer, Poplar Bluff Internet, Inc. / Semo.net P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114, <http://www.semo.net/> Home of TotallyFabricated.com the creators of Total Scrutinizer

2 1

What can be reason for DSP reboot?
by alex 12 Feb '03

12 Feb '03

One of our DSP cards sometimes gets restarted. It sends Management Failure trap and after that Watchdog Timeout trap. What can cause that?

1 0

What's the difference between ARC and HARC???
by Adam Barnhill 11 Feb '03

11 Feb '03

Telnet to the ARC and login Type in 'list chassis' If it's a Hiper you will show one of the following: Hiper Access Router NAC or Hiper II -- Adam Barnhill Support Engineer, TotallyFabricated.com Information Technology Engineer, Poplar Bluff Internet, Inc. / Semo.net P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114, <http://www.semo.net/> Home of TotallyFabricated.com the creators of Total Scrutinizer

3 6

DMS-100 and TC
by Adam Barnhill 11 Feb '03

11 Feb '03

HARC Software v5.x.x suggest that you should have 128MB especially if you are doing any extra routing like ospf or IPX. As far as connections, you should be fine. -- Adam Barnhill Support Engineer, TotallyFabricated.com Information Technology Engineer, Poplar Bluff Internet, Inc. / Semo.net P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114, <http://www.semo.net/> Home of TotallyFabricated.com the creators of Total Scrutinizer

2 1

hiperarc.mib needed for V4.1.59 and V5.2.109
by alex 10 Feb '03

10 Feb '03

Can anybody send me HIPERARC.MIB for HARC V4.1.95 and/or V5.2.109? I need it for UCD-SNMP package of RH Linux.

1 0

TRAP: Card inserted into slot 30?
by alex 08 Feb '03

08 Feb '03

Today I got strange trap on alarm server: Card inserted into slot 30. How is it possible? I know that this chassis has only 17 slots. There are variable values of this trap: ... .iso.org.dod.internet.snmpV2.snmpModules.snmpMIB.snmpMIBObjects.snmpTrap.snmpTrapOID.0 enterprises.usr.0.1 enterprises.usr.nas.nmc.nmcTrap.nmcTrapSequenceNumber.0 288 enterprises.usr.nas.nmc.nmcStat.nmcStatEventId.0 288 enterprises.usr.nas.nmc.nmcCfg.nmcGmtime.0 1044710490 enterprises.usr.nas.chs.uchasSlot.uchasSlotTable.uchasSlotEntry.uchasSlotIndex.1 30 enterprises.usr.nas.chs.uchasSlot.uchasSlotTable.uchasSlotEntry.uchasSlotModuleType.1 enterprises.usr.nas.chs.uchasKnownTypes.uchasKnownModules.uchasSlotUnknown ...

2 2