- montgomery_boats - mailman.xmission.com

m 15 pin
by carlos navarro 18 Jun '19

18 Jun '19

no problem with pin at the present, except for ex ploy seal falling off both sides of pin ?

2 1

m 15 pin
by carlos navarro 18 Jun '19

18 Jun '19

hello, has anyone replaced keel pin with 3/8 x 51/2 stainless bolt while on the trailer? thank for reply.

2 1

Robin with her project
by Gerry Lempicki 18 Jun '19

18 Jun '19

Here's Robin with our M-17, first time out of the shop in 5 months. She painted the bottom, cockpit and deck after we did the repairs needed, then she rebedded every piece of hardware on the boat. On to mast and rigging! -Gerry

4 5

Sailing Adventures four volumes
by Conbert Benneck 18 Jun '19

18 Jun '19

Hi gang, My books, SAILING ADVENTURES has become four separate booksand are now available from AMAZON Books Book 1 is how you become a sailor; from the bath tub to the ocean. Book 2 talks about sailing in the States and in Germany; chartering in Sweden; being transferred to Paris and buying a boat appropriate for the Seine and French inland waters; going by inland water from Rotterdam to Paris. Finally buying a new sailboat; considerations / looking /selecting a new boat. Sailing down the English Channel; and in the Adriatic and the Med. Book 3 Sailing the New England coastal waters; fog sailing; Nor'easters; learning many new things. Book 4 Downsizing to a trailerable sailboat; learning about trailers / trailer problems; launching a boat on a ramp / considerations / problems; Sailing in the Florida Keys; Florida west coast; the Chesapeake; Lake Champlain and Moosehead Lake in Maine. As Montgomery sailors Book 4 will probably be of greatest interest for you. Connie ex M15 #400 LEPPO ex Northeast 38 RHE ex Tripp-Lentsch 29 FUN TOO ex Norwegian power boat FUN that went through 145 locks - mostly hand operated.

3 2

Re: M_Boats: Sailing Adventures four volumes
by bownez＠juno.com 18 Jun '19

18 Jun '19

Connie, So that's what you have been up to, documenting your sailing history.... Fabulous. Good work, you old salty dog..... Mr. Bones ____________________________________________________________ Drink This Before Bed, Watch Your Body Fat Melt Like Crazy Diet Insider http://thirdpartyoffers.juno.com/TGL3141/5d08d64cbb796564c42dest01vuc

1 0

Bow plate update
by Gerry Lempicki 17 Jun '19

17 Jun '19

Some of you may remember the difficulty I was having last month finding an acceptable bow plate for my early hull #23 M-17. My brother ended up bailing me out by fabricating one along the lines of the original. Check it out in the photos. It is an awesome fit and captures the fiberglass flange very well. This was a big stumbling block for me and I am grateful for his contribution. -Gerry

8 9

Re: M_Boats: Bow plate update
by bownez＠juno.com 16 Jun '19

16 Jun '19

Wow, that looks great! Your brother is a stud! Now you can use your M17 as an icebreaker! Mr. Bones ____________________________________________________________ Sad News For Meghan Markle And Prince Harry track.volutrk.com http://thirdpartyoffers.juno.com/TGL3141/5d063dfd67d7d3dfd47dbst02vuc

1 0

Covering topsides resin repairs
by John Schinnerer 07 Jun '19

07 Jun '19

What does anyone here use for "paint" on top of resin, when you've done some kind of small resin/filler repair topsides, and need to cover it? Mainly to protect the resin from UV, and, cover whatever color the resin/filler spots are with something at least vaguely matching your topside gelcoat or paint? For example holes filled when moving cleats, tracks, etc. or replacing them with ones that have different mounting hole locations. Jerry recently wrote: "I've done a bazillian repair jobs over the years... For nearly everything, polyurethane auto paint is far better than gel coat. It's WAY more UV resistant and therefore stays shinier longer and doesn't fade as much as re-sprayed gel and is much easier to apply." Anyone tried this for small stuff like I'm talking about? A can of polyurethane spray paint from local auto parts store? There are usually so many different shades available, I could probably get close to matching my faded-white-ish aged gelcoat. thanks, John -- John Schinnerer - M.A., Whole Systems Design -------------------------------------------- - Eco-Living - Whole Systems Design Services People - Place - Learning - Integration john(a)eco-living.net - 510.982.1334 http://eco-living.net http://sociocracyconsulting.com

11 23

How does one reply?
by Les Schuldt 07 Jun '19

07 Jun '19

I've been following this email list for a few months and have even posted a couple times, but when I "Reply All", my reply doesn't usually show up. Like Dave Scobie, I questioned using an aluminum compound over steel punchings, but again, never saw my post. What is the correct way to reply? Just "Reply"? Not really a Luddite, Les

2 1

Epoxy and fibreglass repair below waterline
by Jason Leckie 07 Jun '19

07 Jun '19

I have just finished doing a epoxy and fibreglass repair below the waterline were my stop pin ripped out of the side of the keel from lowering the centreboard too swiftly last summer. I believe Dave Scobie talked about a tie coat after a repair, before bottom paint but is it necessary over an epoxy repair? One more tin of paint which I would rather not have sitting on my shelf if I don't need it.

2 1