You'll also have to make sure your router is listening to ripv2 routing
updates.
On Friday, October 01, 1999 10:05 AM, Jim Johnson [SMTP:jim@perigee.net]
wrote:
>
> set ip network ip2 routing_protocol ripv2
>
> Robb Bryn wrote:
> >
> > I've disabled IP SOURCE_ADDRESS_FILTER allready (no luck). How do I
turn
> > on
> > RIPv2 on the arc?
> >
> > Thanks
> > Robb Bryn
> >
> > > -----Original Message-----
> > > From: owner-usr-tc(a)lists.xmission.com
> > > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of
> > > Stainforth, Matthew
> > > Sent: Friday, October 01, 1999 8:25 AM
> > > To: 'usr-tc(a)lists.xmission.com'
> > > Subject: RE: (usr-tc) TCHub and routing
> > >
> > >
> > >
> > > I believe you'll also want to build static routes or have the
> > > ARC advertise
> > > the subnet using OSPF or RIPv2 if you want that subnet to be
> > > reachable from
> > > anywhere other than the ARC itself.
> > >
> > > Matthew
> > >
> > > On Friday, October 01, 1999 9:00 AM, Jim Johnson
> > > [SMTP:jim@perigee.net]
> > > wrote:
> > > >
> > > >
> > > > Make sure you:
> > > >
> > > > DISABLE IP SOURCE_ADDRESS_FILTER
> > > >
> > > > if you want the routing to actually **work** as opposed to just
> > > > **showing up** in the routing table correctly.
> > > >
> > > > -Jim
> > > >
> > > > > Robb Bryn wrote:
> > > > >
> > > > > I'm configuring my first routed subnet on the TCHub and
> > > can't quite
> > > > > figure out what I'm doing wrong.
> > > > >
> > > > > I have a Ascend P50 dialing in via ISDN with radius attributes of:
> > > > > Framed-Address = 208.150.95.241
> > > > > Framed-Route = 208.150.95.240/29 208.150.95.241 1
> > > > >
> > > > > After connecting, I can ping the ether address of the TCHub
> > > > > (208.133.28.51) from any of the subnet hosts can't ping
> > > anything past
> > > > > it. I can't ping any host on the subnet from the TCHub.
> > > Below is
> > > > > the output from the show ip network command.
> > > > >
> > > > >
> > > > > HiPer>> show ip network test-ip-I4586
> > > > >
> > > > > SHOW IP NETWORK test-ip-I4586 SETTINGS:
> > > > > Interface: slot:14/mod:2
> > > > > Network Address: 208.150.95.241/H
> > > > > Frame Type: PPP
> > > > > Status: ENABLED
> > > > > Reconfigure Needed: FALSE
> > > > > Mask: 255.255.255.255
> > > > > Station: 0.0.0.0
> > > > > Broadcast Algorithm: IETF
> > > > > Max Reassembly Size: 3464
> > > > > IP Routing Protocol: NONE
> > > > > IP Routing Metric: 1
> > > > > RIP Interface Export Metric: 0
> > > > > IP RIP Routing Policies:
> > > > > IP RIP Authentication Key:
> > > > > HiPer>>
> > > > >
> > > > >
> > > > >
> > > > > I'm pulling my hair out trying to figure out what I've
> > > done wrong. A
> > > > > kick in the right direction would be greatly appreciated.
> > > > >
> > > > >
> > > > >
> > > > > Thanks,
> > > > >
> > > > > Robb Bryn
> > > >
> > > > -
> > > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com"
> > > > with "unsubscribe usr-tc" in the body of the message.
> > > > For information on digests or retrieving files and old
> > > messages send
> > > > "help" to the same address. Do not use quotes in your message.
> > >
> > >
> > >
> > > -
> > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com"
> > > with "unsubscribe usr-tc" in the body of the message.
> > > For information on digests or retrieving files and old messages send
> > > "help" to the same address. Do not use quotes in your message.
> > >
> >
> > -
> > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com"
> > with "unsubscribe usr-tc" in the body of the message.
> > For information on digests or retrieving files and old messages send
> > "help" to the same address. Do not use quotes in your message.
>
> -
> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com"
> with "unsubscribe usr-tc" in the body of the message.
> For information on digests or retrieving files and old messages send
> "help" to the same address. Do not use quotes in your message.
-
To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com"
with "unsubscribe usr-tc" in the body of the message.
For information on digests or retrieving files and old messages send
"help" to the same address. Do not use quotes in your message.
