- USR-TC - mailman.xmission.com

3Com 333NMC/ARC/MultiSpan Bundle
by Stephen Rivera - WRCA.Net 16 Nov '04

16 Nov '04

Just into stock today, checking to see if anyone is interested. Mint Condition- TC1000 Chassis with Dual 130A power 333NMC (3C0504218-00) ARC (3C0504693-00) MultiSpan 96 (3C0504222-00) $3500.00 Qty of the Hiper DSP's at $50ea Qty of the Hiper ARC at $75 333NMC set $1250 336 Port v92 Hiper bundles- EMAIL ME, We'll work a price. my new url for TC1000 gear, http://tc1000-nmc-dsp-arc.com/ Steve Rivera WR Consultant Associates, Inc. Dir: 732-833-2111 x102 IM: srivera711 www.wrca.net Providing Network Hardware Since 1981.

1 0

Lost Total Control Software.
by RKML Mail List 11 Nov '04

11 Nov '04

Hello all, I was wondering if anyone can help me. I am in need of the following files as the HD that I had the files stored on went dead and is unretrievable. The files are - v92.exe (V.92 upgrade code) - HD305109.ZIP - HD30512.ZIP - NE0503110.ZIP - NE050303.ZIP - HARM2206.ZIP - HM080603.ZIP - TCM080206.ZIP Thanks in advance if anyone can help me out. Rudy K.

1 0

Accounting message
by Sherwin T 10 Nov '04

10 Nov '04

Hi! Does anyone knows how to disable the Accounting ON message? --------------------------------------------------------------------- Source-IP Src-Port Destination-IP Dest-Port Id Packet-Type --------------------------------------------------------------------- 192.168.39.152 1646 210.2.230.5 1646 45 Accounting-Request --------------------------------------------------------------------- Time Stamp : 11-NOV-2004 07:03:55 --------------------------------------------------------------------- Acct-Status-Type : 7 Acct-Delay-Time : 157500 Acct-Session-Id : This is an Accounting ON message NAS-IP-Address : 192.168.39.152 thanks, sherwin

1 0

D-Channel Down on HiperDSP Multispan (on second/third spans)
by S H A N 02 Nov '04

02 Nov '04

hi, i am experiencing the following problem. - in a HiperDSP Multispan nic when i use the first span the d-channel comes up nicely and i am able to connect and surf... but whenever, i try to swing the same line from first span to second/thrid span on the nic the nac always have a d-channel alarm.. and gives me fast busy tone on dialin. any suggestions/ideas would be more then welcome. rgds,

2 2

Acceptable SNR
by Sherwin T 02 Nov '04

02 Nov '04

Hi! Does anyone knows the acceptable SNR for dialup? or could you help me to interpret this log under analog statistics: slot chan | Receive Level | Transmit Level | SNR | Near Echo Level | Far Echo level 09001 | 183 | 126 | 454 | 0 | 270 Thanks, Sherwin

1 0

can't ping IP from HyperARC
by Lewis Bergman 29 Oct '04

29 Oct '04

I am going to throw this out here to see if anyone has seen this before and what the wise might think is a cause. First the symptom: User connectswith no difficulty. Connection established, user gets host errors. User cannot ping, bring up web pages, nada. Look up user's ip using list ip networks and find user's ip. Look at backbone router and the route is present for that IP. Ping from backbone router results in timeout. List ip routes on HyperARC shows route to ip as local and the same slot/mod as list ip networks. List ip routes on other HyperARC shows route as RIP with the correct router cards ip. Do a ping from the HyperARC that the modem is assigned to (local) and get timeout. Do a traceroute and get an UNKNOWN 0 response from the HyperARC Verified that this can happen on either HyperArc, on any card, at any time, with different users, any ip pool. Here is the confusing part. Rebooting the backbone router (flushing the route table) solves the problem for a few hours to a couple of days. This points to some kind of router problem or at least a routing protocol problem. The reason I am confused is that the route is *in* the backbone router. The route is in all the HyperARC's, the HyperARC's know what interface the IP is assigned to, at least by all the tables. But it is the HyperARC that can't ping. So how can it be a backbone router problem? a tcpdump on the backbone router shows the RIP requests comming in and the RIP responses going out. I haven't set up OSPF before and it has been a long time since I used static (although I can't see how that would be difficult). I am willing to abandon RIP and go either back to static or to OSPF if there is any thought this might help resolve the situation. And, as an important note, the backbone router software version, HyperARC version, and DSP version have all been unchanged since well before this problem occurred. And lastly, PLEASE HELP!! OK, I am sounding needy and not just a little whiney. I have worked this problem for about 4 days and can't seem to get my mind wrapped around it. Any ideas, questions, comments are very welcome. -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 325-691-3301 800-299-6962

2 1

RE: [USR-TC] Software Update
by Kirti S. Bajwa 26 Oct '04

26 Oct '04

Try: http://www.goesp.com/downloads/Documents/TotalControl/ Kirti -----Original Message----- From: Chris Stone [mailto:cstone@axint.net] Sent: Monday, October 25, 2004 3:47 PM To: 'Discussion relating to the 3Com/US Robotics Total Control modemsystems.' Subject: RE: [USR-TC] Software Update I have a couple of chassis that I'd like to get updated and synced software installed on. How does one go about getting the software these days. Does it require a $1,000+ service contract with someone to gain access to the code downloads? -----Original Message----- From: usr-tc-bounces+cstone=axint.net(a)mailman.xmission.com [mailto:usr-tc-bounces+cstone=axint.net@mailman.xmission.com] On Behalf Of Kirti S. Bajwa Sent: Saturday, October 23, 2004 6:59 AM To: 'Discussion relating to the 3Com/US Robotics Total Control modemsystems.' Subject: RE: [USR-TC] Software Update Todd: Thank you for your response. I went ahead and downloaded the software for each HiPer card, unzipped and then installed it. It worked. Kirti -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Friday, October 22, 2004 2:40 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] Software Update Sounds like you don't have the software in the default sdl directory. So TCM is giving you that error b/c it can't find the code. Click on the box to enter a new directory path or put the files in the 3com sdl directory. Todd ----- Original Message ----- From: "Kirti S. Bajwa" <kbajwa(a)tib.com> To: "'Discussion relating to the 3Com/US Robotics Total Control modemsystems.'" <usr-tc(a)mailman.xmission.com> Sent: Thursday, October 21, 2004 3:43 PM Subject: [USR-TC] Software Update > Hello: > > About an year ago, I purchased two 3Com (each with 1-HiPer NMC, 2-Hiper ARC > & 10-Hiper DSP). I was planning to set them up for a friend. I downloaded > and installed software (On some of the components): > > HiPer NMC: 8.6.3 > HiPer ARC: 5.3.110 > HiPer DSP: 3.5.12 > > After about 1+ year of inactivity, I decided to setup 3Com. I noticed that > some of the HiPer DSP has old software intalled on them. Using TCM, I > decided to update the software and get the following errors: > > HiPer NMC: Error: No .nac file > Uncheck the slot or enter a new file name > > Hiper ARC: Error: (Same) > HiPer DSP: Error: (Same) > > I noticed that on the Software Download screen Slot colum show cards > correctly. NAC/DMF File, SDL File & Status columns are blank. > > As I said, last year I had done Software Updates but now I can not. Can > somebody help me by showing the light? > > Kirti > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

(no subject)
by Dev 26 Oct '04

26 Oct '04

Hello all, I currently have a TC1000 setup to allow a connection and routes it right to a Linux sever ip that is running a specific applicaiton. I needed to know if I can the TC1000 be set to turn off unsolicited messages being sent? ---------- UMPA Brian C. Doyle Director, Internet Services United Merchant Processing Association <http://www.umpa-us.com>http://www.umpa-us.com 1-800-555-9665 ext 212

2 2

RE: [USR-TC] Software Update
by Kirti S. Bajwa 25 Oct '04

25 Oct '04

Todd: Thank you for your response. I went ahead and downloaded the software for each HiPer card, unzipped and then installed it. It worked. Kirti -----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Friday, October 22, 2004 2:40 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] Software Update Sounds like you don't have the software in the default sdl directory. So TCM is giving you that error b/c it can't find the code. Click on the box to enter a new directory path or put the files in the 3com sdl directory. Todd ----- Original Message ----- From: "Kirti S. Bajwa" <kbajwa(a)tib.com> To: "'Discussion relating to the 3Com/US Robotics Total Control modemsystems.'" <usr-tc(a)mailman.xmission.com> Sent: Thursday, October 21, 2004 3:43 PM Subject: [USR-TC] Software Update > Hello: > > About an year ago, I purchased two 3Com (each with 1-HiPer NMC, 2-Hiper ARC > & 10-Hiper DSP). I was planning to set them up for a friend. I downloaded > and installed software (On some of the components): > > HiPer NMC: 8.6.3 > HiPer ARC: 5.3.110 > HiPer DSP: 3.5.12 > > After about 1+ year of inactivity, I decided to setup 3Com. I noticed that > some of the HiPer DSP has old software intalled on them. Using TCM, I > decided to update the software and get the following errors: > > HiPer NMC: Error: No .nac file > Uncheck the slot or enter a new file name > > Hiper ARC: Error: (Same) > HiPer DSP: Error: (Same) > > I noticed that on the Software Download screen Slot colum show cards > correctly. NAC/DMF File, SDL File & Status columns are blank. > > As I said, last year I had done Software Updates but now I can not. Can > somebody help me by showing the light? > > Kirti > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

RE: USR-TC Digest, Vol 20, Issue 6. Re: Help on DSP busy!
by AkinTunde Popoola 23 Oct '04

23 Oct '04

Thanks Guys, For now , I discovered a much older DSP card (ver 2.x.x) works fine on the chassis if all other DSP cards are removed. tight but still allows a few people to connect while I figure out what's wrong with the cards or I can buy some new ones. Anyone has an idea of where I can lay hands on such E1 DSP cards? 'Tunde >---------------------------------------------------------------------- > >Message: 1 >Date: Thu, 21 Oct 2004 10:12:09 -0600 >From: "Cyrus Smith" <cyrus(a)mtio.net> >Subject: Re: [USR-TC] Help on DSP busy! >To: <usr-tc(a)mailman.xmission.com> >Message-ID: <000f01c4b788$b7bdc8c0$4902a8c0@DellXPSB733r> >Content-Type: text/plain; charset="iso-8859-1" > >I don't know if this would apply to a E1 setup, our setup is a T1/D4 >standard setting did not work, the switch I am connecting to is very old, I >had to connect a cable directly to the dsp and configure via a CLI, I too >had a similar problem, the change was "Answer to Supervision Delay" I >pushed it out to "70". > >(disclaimer) I am not a telco guy, and I think my local telco knows less >than I do, I came up with this setting by trying everything. >

1 0