- USR-TC - mailman.xmission.com

(usr-tc) DSP hang ups & code
by Greg owens 21 Dec '99

21 Dec '99

We are having some problems with all, but mainly one DSP card continually having a pair of modems hanging up. (Resetting the card about 3 to 4 times a week. All DSP cards are running the same code 2.0.81) I spoke with our vendor about sending this card back for repairs as the others do not hang up nearly as often. Thir solution was to tell me I need to put the 2.6.0 code in there that it had all the fixes for this. I thought that 2.0.6 was the revision that had a fix for this. I spoke with them about this and they said no the 2.6.0 code is newer than the 2.0.6 Am I nutts (insert your private joke here) but I thought the lower the revision number the newer the code. Has anyone seen any major improvements with any of these codes? And what would you suggest? Many Thanks and HAPPY HOLIDAYS Greg Owens Magnolia Internet Services http://www.magnolia-net.com

3 2

(usr-tc) ARC reboot removes static route
by Blake Fithen 21 Dec '99

21 Dec '99

Can anyone clue me in on why the ARC removes a static route definition after "save all" and a "reboot"? IOW, add ip route x.x.x.x/32 gateway x.x.x.x save all reboot *poof* - no more route. After adding the route it works fine and shows up in "li ip routes". Checked the docs, didn't say anything about it not being persistent after a reboot. thanks, blake - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Recommended ip pool size.
by Stainforth, Matthew 20 Dec '99

20 Dec '99

Same here...that's just what I've seen 3Com recommend on the list here before. > -----Original Message----- > From: Brian Elfert [SMTP:brian@citilink.com] > Sent: Monday, December 20, 1999 6:11 PM > To: 'usr-tc(a)lists.xmission.com' > Subject: RE: (usr-tc) Recommended ip pool size. > > > > On Mon, 20 Dec 1999, Stainforth, Matthew wrote: > > > > > For NetServers they recommended having a few extra addresses in the pool > due > > to leakage but I'm told the ARCs don't have this problem. If 23 trunks > are > > all you have then 23 addresses should do it. > > I've been running Netservers on 3.7.24 for 18 months or more now. I've > had the same numbers of IPs as modems, and I've never seen any leakage on > the IP pool. > > Brian > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) NOTICE: HiperDSP Hardware revision 0.55.0
by David Bachta 20 Dec '99

20 Dec '99

All, Chuck tried to sent this to the list on Friday but I don't think it was ever posted... or maybe I just missed it. If it did make it across and I missed it, I apologize for the repost. Regards, David ---------------------- Forwarded by Chuck Stace/MW/US/3Com on 12/20/99 02:30 PM --------------------------- Chuck Stace/MW/US/3Com 12/17/99 04:16 PM Sent by: Chuck Stace - Project Manager, CSPP CSO Availability Services To: usr-tc@lists.xmission.com@3COM-MWGATE cc: Subject: NOTICE: HiperDSP Hardware revision 0.55.0 Dear 3Com Customers, We have had reports of HiPer DSP failures similar to those reported today within this mailing list. We would like to inform you that we have done an investigation of this issue and will be providing a software resolution. We will be completing testing of software version 2.0.51 this weekend and hope to make it available early next week. The issue is a timing problem that manifests itself under circumstances that are present in the 0.55.0 version of hardware. HiPer DSP v2.0.51 provides resolution to this issue. The mention of software in a previous message was a version of code that was provided to a limited customer base for concurrent testing. If there are any questions or concerns regarding this announcement, please contact 3Com Technical Support toll-free at 1-800-231-8770. If you are calling from an area not handled by this number, the TotalService website has contact information for other countries and regions. Please go to the TotalService website (http://totalservice.3com.com/) and click on 'Contacting Tech Support' for more information. Chuck Stace Customer Service Product Planning Chuck_Stace(a)3com.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) MultiTeck
by Jerry Kalligonis 20 Dec '99

20 Dec '99

Has anyone had difficulties getting MuliTeck modems to connect to newer DSP code? Any tips? Thanks Jerry - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Recommended ip pool size.
by Stainforth, Matthew 20 Dec '99

20 Dec '99

For NetServers they recommended having a few extra addresses in the pool due to leakage but I'm told the ARCs don't have this problem. If 23 trunks are all you have then 23 addresses should do it. Matthew Stainforth || Technical Services Manager || BrunNet Inc. > -----Original Message----- > From: Jason P. [mailto:jjperc@petronet.net] > Sent: Monday, December 20, 1999 1:16 PM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) Recommended ip pool size. > > > We have a HiperARC chassis with PRI service. Can anyone give me a > suggestion on what the recommended ip pool size would be for one PRI > span (23 modems)? I haven't been able to find this info > anywhere in any > documentation. > > Thanks in advance. > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) Total Control Problem
by Stainforth, Matthew 20 Dec '99

20 Dec '99

for CT1 check and make sure you have the DS0->modem mapping set up correctly for PRI check your PRI Configuration and set the modem call routing method appropriately (FirstAvailable or RoundRobin would probably be simplest for you in this case). Then make sure all your modems are configured the same as one of your working modems...I use the "load from" function to make life easier. Matthew Stainforth || Technical Services Manager || BrunNet Inc. > -----Original Message----- > From: meijin(a)vvm.com [mailto:meijin@vvm.com] > Sent: Monday, December 20, 1999 11:59 AM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) Total Control Problem > > > I picked up a used Total Control unit with a total of like 48 > modems in it. > The first modem card (with 4 modems) in it will all answer > calls, but none > of the other modems will get calls. Can anyone familiar with this unit > think of something I might have missed or that I can check to > see what the > deal is? > > Thanks! > > Michael > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) S&A Server Y2K issues
by K Mitchell 20 Dec '99

20 Dec '99

Couple of questions regarding this, the box is NT4/SP5; -Are there any known issues relating to S&A Server 6.0.90 running on Access 98? -What effect would upgrading to Access 2000 have on S&A Server? Thanks, -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Total Control Problem
by meijin＠vvm.com 20 Dec '99

20 Dec '99

I picked up a used Total Control unit with a total of like 48 modems in it. The first modem card (with 4 modems) in it will all answer calls, but none of the other modems will get calls. Can anyone familiar with this unit think of something I might have missed or that I can check to see what the deal is? Thanks! Michael - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Total Control Problem
by meijin＠vvm.com 20 Dec '99

20 Dec '99

I picked up a used Total Control unit with a total of like 48 modems in it. The first modem card (with 4 modems) in it will all answer calls, but none of the other modems will get calls. Can anyone familiar with this unit think of something I might have missed or that I can check to see what the deal is? Thanks! Michael - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0