- USR-TC - mailman.xmission.com

RE: (usr-tc) DSP locks up in one chassis, never in our test chass is
by Scott Trautman 15 Dec '99

15 Dec '99

Nope, not used at all in fact. After 2nd lockup, I busied out all the lines to that card, still locked up on me. Yet, in the office, it's just fine. SMT -----Original Message----- From: Jeff Mcadams [mailto:jeffm@iglou.com] Sent: Wednesday, December 15, 1999 1:48 PM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) DSP locks up in one chassis, never in our test chassis Thus spake Scott Trautman >Ever seen that? Locks up within about an hour. Pulled it out of the >production chassis it was in (3 DSP's, Quad's and Dual T1, only 1 T1 on >it), put in our test chassis, no lockups half day. Other two DSP's work >just fine no problems. Any ideas of where to start on this before I >send it back to 3Com? >HiperARC's, NMC's all with latest and greatest, slots otherwise fine >with quad card before this changeover today, so don't think I have a >"problem slot". >Any questions to ask would even be helpful. How many calls does it get in the test chassis? Does it get fully loaded up there? -- Jeff McAdams Email: jeffm(a)iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) DSP locks up in one chassis, never in our test chassis
by Scott Trautman 15 Dec '99

15 Dec '99

Ever seen that? Locks up within about an hour. Pulled it out of the production chassis it was in (3 DSP's, Quad's and Dual T1, only 1 T1 on it), put in our test chassis, no lockups half day. Other two DSP's work just fine no problems. Any ideas of where to start on this before I send it back to 3Com? HiperARC's, NMC's all with latest and greatest, slots otherwise fine with quad card before this changeover today, so don't think I have a "problem slot". Any questions to ask would even be helpful. SMT Scott Trautman 608-240-4638,4637fax Global Dialog Internet www.gdinet.com 2810 Crossroads, STE LL2 Madison WI 53718 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Versa 6000 28.8 modem/diagnosis of strange modem problem
by Scott Trautman 15 Dec '99

15 Dec '99

Fellow has real problems getting on. Sometimes, no problem. No time of day or business pattern. What happens is the negotiation happens just fine, usual end of negotiation, but then just dead air. The connection is dead. Is there some timeout somewhere we're hitting on this modem negotiation? It's not hanging up the call; it's definitely negotiating. Doesn't appear to be any kind of phone line problem, or systematic problem. Will be trying a different external modem on his laptop to try that. Just wondering if anyone else had any hints or know anything about this modem in particular. SMT Scott Trautman 608-240-4638,4637fax Global Dialog Internet www.gdinet.com 2810 Crossroads, STE LL2 Madison WI 53718 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Distributed TCM ?
by Robert von Bismarck 14 Dec '99

14 Dec '99

Hello, I will be implementing a lot of HiPer-based Chassis soon, and our 3Com rep has told me about something called DTCM (for distributed TCM) which should help a lot for configuring and managing lots of TC's. Has anyone ever seen / worked with this product ? Is it any good ? What kind of Machine do I need to run it on (I know it only runs on HP-UX and Solaris-Sparc) ? Thanks for any info, Robert

3 2

RE: (usr-tc) Hello
by Stainforth, Matthew 14 Dec '99

14 Dec '99

I think everyone reached a state of nirvana with their Total Control systems > -----Original Message----- > From: Scot Desort [mailto:scot@njaccess.net] > Sent: Tuesday, December 14, 1999 11:18 AM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) Hello > > > Hello everyone -- is the list dead? Haven't seen any posts in > a while. > > Did Y2K hit early <g> > > -- > Scot Desort > Network Operations Manager > NJ Internet Access > 973-244-1110 > Tech Support > 973-303-HELP > support(a)njaccess.com > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) USR-DOCSIS list
by System Administrator 14 Dec '99

14 Dec '99

Hey guys, Wondering if anyone knew of any lists to subscribe to for 3Com's TC Two-way data over cable equipment?? __________________________________ Justin Ellison System Administrator InternetUSA sysadmin(a)nebi.com http://nebi.com 800-603-3502 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Looking to buy a Total Control
by Mike Storjohann 14 Dec '99

14 Dec '99

I am looking for a Total Control that contains the following: Â 1Â Â Â HiperARC NAC 1Â Â Â Dual V.35 + Ethernet NIC 1Â Â Â NMC NIC and NAC set 2Â Â Â HiperDSP NIC and NAC sets Â 70 Amp Power supply also. Â Please let me know off list if you have this bundle available. Â Thank you. Mike Storjohann Internet Services Administrator HunTel.net mstorjohann(a)huntel.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) FS: USR
by Steve Rivera 14 Dec '99

14 Dec '99

Since the list has been slow.... here's some breaking news :) Available this week. 5- Hiper ARC 9- Hiper DSP 5- Hiper NMC (New) Available now 8- Dual T1/E1 nic/nac sets 4- Dual PRI nic/nac sets 36- Quad Digital Modems w/ nic $150 each 10- Netserver PRI (New) 10- NMC (New) Qty- 130A - DC Power Netserver 16 Plus Netserver 16 Netserver 8 MP16 MP8 Chassis Parts Power Supplies Also have the quad cables available. .................................................... Steve Rivera - ISP-NetworkHardware.com (WRCA) sales(a)wrca.net v-732-833-2111 pgr-732-325-1092 ---WAN ACCESS SPECIALIST--- http://www.ISP-NetworkHardware.com Cisco, Ascend, Livingston, USR, Microcom, Computone, Kentrox, Adtran...and more - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Remember my post about 2nd login with same account drops immediat ely?
by Scott Trautman 14 Dec '99

14 Dec '99

Yep, MultiPPP thing. FYI for all of you bound to bang your head against it sooner or later. This fellow's first login with Pstandish was actually an NT server running a proxy (he lead me to believe it was a Win95 machine), and even though not apparently setup for MPPP, it was definately waiting for an MPPP connection, forever, so that the next machine to dial in with same name, Pstandish, got dropped because no way could it bind to that first connection. I don't/didn't know enough about MPPP to know that; is that just an NT thing, or would he have had to set that somewhere regardless of him ever bringing up a 2nd line on the NT machine. Usually MPPP just works for us and I don't find these relatively weird kinds of problems. SMT Scott Trautman 608-240-4638,4637fax Global Dialog Internet www.gdinet.com 2810 Crossroads, STE LL2 Madison WI 53718 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Hello
by Scot Desort 14 Dec '99

14 Dec '99

Hello everyone -- is the list dead? Haven't seen any posts in a while. Did Y2K hit early <g> -- Scot Desort Network Operations Manager NJ Internet Access 973-244-1110 Tech Support 973-303-HELP support(a)njaccess.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0