- USR-TC - mailman.xmission.com

(usr-tc) more netserver questions
by Brian 22 Mar '00

22 Mar '00

If you have a netserver net0 configured as say: 12.1.2.1 255.255.255.0 and in net0 routing is set for "broadcast"......is it going to try and broadcast 12.1.2.1 as the default for 12.1.2.0? The routing table shows something like: Destination Gateway Flag Met Interface VPN -------------------- ---------------- ---- --- --------- --- 12.1.2.0 /24 12.1.2.55 NLC 1 net0 0 so would it try to announce that via RIP if "broadcast" was enabled under net0? ----------------------------------------------------- Brian Feeny (BF304) signal(a)shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) Motorola-tc?
by Randy Cosby 21 Mar '00

21 Mar '00

http://news.cnet.com/news/0-1004-200-1576889.html?tag=st.ne.1002.thed.1004-2 00-1576889 Looks like we'll be Motorola customers soon... Randy Cosby InfoWest, Inc. 435-674-0165 x11 Fax: 603-462-6427 --- http://www.infowest.com http://www.devshed.com http://www.32bit.com "A ship in port is safe, but that is not what ships were built for" - Grace Hopper - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 5

RE: (usr-tc) Is 3Com going to give us the SHAFT?!
by Greg Long 21 Mar '00

21 Mar '00

Form the sound of the article, they are drop-kicking teh dial-up modem business, but they are holding on to the ISP hardware. Another article mentioned they were selling the ISP hardware part to Motorola. Of course all of this won't be known for sure for a few days still as the dust settles and the "misunderstandings" created by the journalists disappear. -Greg > -----Original Message----- > From: owner-usr-tc(a)lists.xmission.com > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Brian > Sent: Monday, March 20, 2000 3:56 PM > To: USRobotics TC Mailing List > Subject: (usr-tc) Is 3Com going to give us the SHAFT?! > > > > http://quote.bloomberg.com/fgcgi.cgi?ptitle=Technology%20News& > s1=blk&tp=ad_topright_tech&T=markets_fgcgi_content99.ht&s2=blk > &bt=ad_bottom_tech&s=510a6688fac91aaf5f87a856b > 1669493 > > It doens't sound like they are spinning it off, it sounds > like they plan > to 86 it................if that's the case.........well then we are > fscked. > > Brian > > > ----------------------------------------------------- > Brian Feeny (BF304) signal(a)shreve.net > 318-222-2638 x 109 http://www.shreve.net/~signal > Network Administrator ShreveNet Inc. (ASN 11881) > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

Re: (usr-tc) Is 3Com going to give us the SHAFT?!
by Sonny Ruiz 20 Mar '00

20 Mar '00

Some corrections: Analog modems and modem PC cards go the new company with Accton and NatSteel. NICs and combo PC cards stay with 3Com. Switch 4000, not 2000 (who cares about the number anyway?)new product (?). 3Com will OEM Copper Mountain DSLAM as Total Control 500. New logo sucks (you can see at the press box in 3Com's web site) Sonny >From: Nicolas St-Pierre <nstpierre(a)iasl.com> >Reply-To: usr-tc(a)lists.xmission.com >To: usr-tc(a)lists.xmission.com >Subject: Re: (usr-tc) Is 3Com going to give us the SHAFT?! >Date: Mon, 20 Mar 2000 18:56:59 -0500 > >3Com is shedding Netbuilder and Pathbuilder to Motorola > >Corebuilder goes to Extreme Networks. > >They are spinning off the NICs and the Modems to/with ACCTON Technologies >and >form a new company "US Robotics" (20% ownership by 3Com). > >They are selling the Mt Pleasant FAB (HiPer DSP?) to NatSteel Electronics. > >They are now reselling Copper Mountain CopperEdge 150 and 200 DSLAM? >(hopefully >a trend to put it in TC!!) > >They will be reselling F5 Labs layer 4 switches and new Corebuilder based >switch >as "Switch 2000?" > >TotalControl stays with 3Com. CDMA , Cable , Dial, SS7 and DSL is their new >target >CPE Devices for Cable and DSL will also be part of 3Com > >Looks like they're concentrating on TC and the CPE. > >o, and a new logo too! > >I got that info from the conference call. > >Greg Long wrote: > > > > Form the sound of the article, they are drop-kicking teh dial-up modem > > business, but they are holding on to the ISP hardware. Another article > > mentioned they were selling the ISP hardware part to Motorola. Of >course > > all of this won't be known for sure for a few days still as the dust >settles > > and the "misunderstandings" created by the journalists disappear. > > > > -Greg > > > > > -----Original Message----- > > > From: owner-usr-tc(a)lists.xmission.com > > > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Brian > > > Sent: Monday, March 20, 2000 3:56 PM > > > To: USRobotics TC Mailing List > > > Subject: (usr-tc) Is 3Com going to give us the SHAFT?! > > > > > > > > > > > > http://quote.bloomberg.com/fgcgi.cgi?ptitle=Technology%20News& > > > s1=blk&tp=ad_topright_tech&T=markets_fgcgi_content99.ht&s2=blk > > > &bt=ad_bottom_tech&s=510a6688fac91aaf5f87a856b > > > 1669493 > > > > > > It doens't sound like they are spinning it off, it sounds > > > like they plan > > > to 86 it................if that's the case.........well then we are > > > fscked. > > > > > > Brian > > > > > > > > > ----------------------------------------------------- > > > Brian Feeny (BF304) signal(a)shreve.net > > > 318-222-2638 x 109 http://www.shreve.net/~signal > > > Network Administrator ShreveNet Inc. (ASN 11881) > > > > > > > > > - > > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > > with "unsubscribe usr-tc" in the body of the message. > > > For information on digests or retrieving files and old messages send > > > "help" to the same address. Do not use quotes in your message. > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > >-- >Nicolas St-Pierre >Systems Engineer >Internet Access Solutions Ltd. >Tel (905) 469-4953 >Fax (905) 469-4954 > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Is 3Com going to give us the SHAFT?!
by Brian 20 Mar '00

20 Mar '00

http://quote.bloomberg.com/fgcgi.cgi?ptitle=Technology%20News&s1=blk&tp=ad_… 1669493 It doens't sound like they are spinning it off, it sounds like they plan to 86 it................if that's the case.........well then we are fscked. Brian ----------------------------------------------------- Brian Feeny (BF304) signal(a)shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881) - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Need help with ISDN Channel Bonding
by Clint R. Sparks 20 Mar '00

20 Mar '00

I need some help with an ISDN BRI setup we are trying to do. We are trying to hookup a Cisco 1604R ISDN BRI Router to the Hiper DSP Total Control, Ameritech filled the order for BRI two B channels and 1 D Channel and we can manage to hook one B channel no problem but when we try to bond or multilink the two B channels together it will hookup the second channel for approximately two or three seconds and then it dies and about one second later the first B channel that had been hooked up dies. We are running Hiper DSP code 2.0.51 on the particular Hiper DSP card it is on and Hiper ARC code 4.1.59-6. 3 Com looked at our setup on the Total Control and said it look right, Cisco looked at the 1604R and said it looked right. And Ameritech said the B channels are setup right. Now we are lost, something is not right so someone is wrong and we cannot figure what it is. Does anyone have any ideas or know if there is something the Telco has to do to allow two B channels to bond on a BRI setup? Ameritech says they do not that it is all done at each equipment end which I know but we are searching for anything at this point. Any help would be appreciated. Thank you, Clint R. Sparks ComQuest Internet Services csparks(a)cqc.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) Wholesale DSL ?
by jeff.binkley＠asacomp.com 20 Mar '00

20 Mar '00

Is anyone aware of wholesale DSL providers that also provide Internet service like the dialup whoesalers ? Thanks, Jeff Binkley ASA Network Computing - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 8

(usr-tc) hung modems return
by K Mitchell 19 Mar '00

19 Mar '00

After about 3 months of problem-free operation, I'm getting hung modem pairs again on one of my DSPs. DSPs are 0.49.0 running 2.0.81, ARC 4.2.32. I guess it's time to look at upgrading. Exactly what is the newest DSP PRI code, and how stable is it? Thanks, -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000/886-2500 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 4

(usr-tc) hung modems
by Dick 19 Mar '00

19 Mar '00

I am pasting my versions as extracted from the TCM. I am at a loss for why sets of modems hang and the card requires a reboot every few days. We have 2 such racks, both with the same versions of the code and they both do this now. (one more than the other). And it seems, but could just be perception, that it is only associated with a few cards/lines. On the rack shown below it is card 1 and card 5, for sure, that do this. I know I have seen this problem talked about. Has anyone seen if this is a line level problem from the telco or something? Both of these units are within a city block of the telco switch. Can I add attenuation on the line with some type of resistance or set it in the unit itself? If I could test things without the telco getting involved everything would go much smoother. 3Com 17-Slot Chassis with PB clocking 1 3COM High-Density 24 Channel NAC B158CSZA 1OQ 0.49.0 8192 2048 0000000000000000 2.0.19 2 3COM High-Density 24 Channel NAC B168CVPA 1OQ 0.49.0 8192 2048 0000000000000000 2.0.19 3 3COM High-Density 24 Channel NAC BCI7C8M4 1OQ 0.49.0 8192 2048 0000000000000000 2.0.19 4 3COM High-Density 24 Channel NAC BC97B9Z4 1OQ 0.49.0 8192 2048 0000000000000000 2.0.19 5 3COM High-Density 24 Channel NAC B249S10G 1OQ 0.53.0 8192 2048 0000000000000000 2.0.19 6 3COM High-Density 24 Channel NAC BC87B123 1OQ 0.49.0 8192 2048 0000000000000000 2.0.19 7 3COM High-Density 24 Channel NAC B229Q4AG 1OQ 0.53.0 8192 2048 0000000000000000 2.0.19 8 3COM High-Density 24 Channel NAC B789BLGM 1OQ 0.54.0 8192 2048 0000000000000000 2.0.19 16 3COM HiPer ARC NAC B478PF8Y 20C 19.0.0 65536 8192 0000000000010000 4.2.32 17 3COM Network Management Card with clock B4F8Q4Y6 1U600000 6.0 16384 8192 0000000000000000 6.1.17 1 3COM T1/E1 HDM NIC 0 0 0000000000000000 2 3COM T1/E1 HDM NIC 0 0 0000000000000000 3 3COM T1/E1 HDM NIC 0 0 0000000000000000 4 3COM T1/E1 HDM NIC 0 0 0000000000000000 5 3COM T1/E1 HDM NIC 0 0 0000000000000000 6 3COM T1/E1 HDM NIC 0 0 0000000000000000 7 3COM T1/E1 HDM NIC 0 0 0000000000000000 8 3COM T1/E1 HDM NIC 0 0 0000000000000000 16 3COM Dual 10/100 Ethernet NIC - PCI based 0 0 0000000000000000 17 3COM Ethernet NIC 0 0 0000000000000000 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) FYI...keep your eyes open...
by Jeff Mcadams 17 Mar '00

17 Mar '00

http://news.cnet.com/news/0-1004-200-1574706.html?tag=st.ne.1002.bgif?st.ne… Just an FYI of what might be coming up. I see the possibilities presented here as overall a good thing. Maybe part of this will be to quit trying to make CSO a profitable business unit. :) -- Jeff McAdams Email: jeffm(a)iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0