- USR-TC - mailman.xmission.com

(usr-tc) Intermittent Login Failures
by Jeremy Shaffner 19 Aug '00

19 Aug '00

Hello, We recently started having problems where every other login attempt (or so) fails and we get the following error on the console: Facility "User Manager", Level "CRITICAL":: Unable to allocate memory: ES_NO_DYNMEM add handle A reboot clears it up. We currently have 10 DSP's in it, but we aren't any where near capacity when it happens. Any suggestions? -- --- Jeremy Shaffner System & Network Administrator JORSM Internet jer(a)jorsm.com http://www.jorsm.com/~jer/pgp.key - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) Total Control Chassis
by admin＠bluewaterarea.com 18 Aug '00

18 Aug '00

I have been following this list for some time, and have had great luck with my equipment. I currently have a Total Control Chassis that has performed well for me, but I have found another solution to providing remote access to my customers, so I must sell my equipment. I have one Total Control Chassis with 1 HipArc, 1 TCM, 1 Power Supply, and 4 Hiper DSP's. If anyone would be interested in purchasing some slightly used but reliable equipment, please contact me personally and I can send you the full specs on my equipment. -- Jeff Jarchow BWA Internet http://www.bwai.net/ admin(a)bwai.net 800-453-4377 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) techs on the list
by Jeff Mcadams 17 Aug '00

17 Aug '00

Heya... I need to back off of a previous post a bit...I have confirmed that Mike Wronski, Krish, and the others are still on the list (apparently through a list exploder at 3Com, not directly), so things aren't as bad as I had feared were possible. :) Anyway...wanted to let the list know that the techs are still around and hearing us (and willing to help if something comes up)...since the list has been fairly quiet of any significant technical issues we just haven't seen much of them. :) Which is rather a good thing in some ways. Of course, my issues with support contracts still stand (particularly since they aren't issues with the techie folks :), and I'd *still* like to hear something from 3Com about what, if anything, they're doing to help resolve the support contract issue. :) -- Jeff McAdams Email: jeffm(a)iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Configuring Static IP Addresses through 2 HiperARCs
by Mike Storjohann 17 Aug '00

17 Aug '00

Does anyone know if there is a way to give a user a static IP address when he connects to a TotalControl with 2 HiperARCs? The issue is that the router that connects the 2 ARCs to the outside world does not know which ARC to send data destined to the static IP address that is assigned. Why? Well the same hunt group that the user dials into is assigned to all HiperDSPs in the chassis and there are 5 DSPs routed through each ARC. So there is no guarantee which ARC the user will be routed through. I hope you got all that! Can you add the same static IP address in each ARC and have it use RIP to add a route in the connecting router? If so, will only the one that is in use by the user have an active RIP session? If you have any ideas at all, please let me know. Thanks. Mike Storjohann Internet Services Administrator HunTel.net® mstorjohann(a)huntel.net <mailto:mstorjohann@huntel.net>

2 1

(usr-tc) WTB: USR/3Com Hiper ARC/DSP
by Steve Rivera -www.wrca.net 16 Aug '00

16 Aug '00

WR Communication Consultants (WRCA) is looking to buy: 3- USR Hiper DSP w/ nic (NEW/OPEN BOX) 5- US Robotics/3Com Hiper Access Router Cards w/ nics. Memory configuration and age of card helpful. Please email off-list. I have the following available: EdgeServer w/ nic Hiper NMC Hiper DSP QTY- Quad Digitals. $250ea or BO Steve Rivera (VP) - w-732-833-2111 / c-732-433-5890 24Hr www.isp-networkhardware.com ICQ# 75229638 Email: srivera(a)wrca.net Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. Cisco, Ascend,USR,Adtran, Kentrox,Livingston, Microcom,Computone,Verilink, IBM,Motorola,UDS,Codex,ATT,Paradyne,Hayes,Racal,GDC,Telebit,MultiTech, Sync/Tylink,Wellfleet,,Black Box,Micom, APC Batteries & More - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 4

RE: (usr-tc) Lost password on Netserver. (fwd)
by mike＠otherland.dyndns.org 16 Aug '00

16 Aug '00

If your talking TC Netserver its dip 5. ---------- Forwarded message ---------- Date: Tue, 15 Aug 2000 17:04:28 -0700 From: albert <emmanuel(a)mwt.net> Reply-To: usr-tc(a)lists.xmission.com To: usr-tc(a)lists.xmission.com Subject: RE: (usr-tc) Lost password on Netserver. what are we talking about here?? a netserver 16 ? if so it is 4..to clear,.. a > -----Original Message----- > From: owner-usr-tc(a)lists.xmission.com > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Veda Narayan > Sent: Tuesday, August 15, 2000 1:51 PM > To: usr-tc(a)lists.xmission.com; albert > Subject: RE: (usr-tc) Lost password on Netserver. > > > Quoting albert <emmanuel(a)mwt.net>: > > > dip 4 down power up.,... > > No its dip 5 down not dip 4 > > -V > > > > > -----Original Message----- > > > From: owner-usr-tc(a)lists.xmission.com > > > [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jaye Mathisen > > > Sent: Monday, August 14, 2000 4:21 PM > > > To: usr-tc(a)lists.xmission.com > > > Subject: (usr-tc) Lost password on Netserver. > > > > > > > > > > > > > > > I'm taking over some maint. because of the departure of the previous > > > person. One of the netservers has a password that I can't figger' > > out. > > > > > > Isn't there a dip switch that wipes everything out? Or how do I > > recover > > > this password? > > > > > > > > > - > > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > > with "unsubscribe usr-tc" in the body of the message. > > > For information on digests or retrieving files and old messages send > > > "help" to the same address. Do not use quotes in your message. > > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > > > =========== > > -V > > ========== > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Lost password on Netserver.
by Jaye Mathisen 15 Aug '00

15 Aug '00

I'm taking over some maint. because of the departure of the previous person. One of the netservers has a password that I can't figger' out. Isn't there a dip switch that wipes everything out? Or how do I recover this password? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 3

(usr-tc) PRI card problem?
by Lists 15 Aug '00

15 Aug '00

Further to my last e-mail, now I'm getting this from the PRI card: <PH_ERROR> ph_frame__post_xmit: datagram: frame t/p: 8/0030:001e48ec, status >0x04< Anyone know if this is a fried PRI card, a fried chassis, some other fried card, fried code, fried config, or something else? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Anybody need a EdgeServer Card?
by Steve Rivera -www.wrca.net 15 Aug '00

15 Aug '00

WR Communication Associates (WRCA) has the following card available to ship immediately. Cards are guaranteed working upon delivery. 1- USR EdgeServer Card w/ SCSI-2 NIC Part# 69-001160-01 R:5 Part# 69-001410-00 R:2 If you have an interest please contact me off list. I AM IN THE MARKET FOR: Hiper ARC's, DSP's, Quad Analog/Digitals. Please email/Call if you have any available. Steve Rivera (VP) - w-732-833-2111 / c-732-433-5890 24Hr www.isp-networkhardware.com ICQ# 75229638 Email: srivera(a)wrca.net Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. Cisco, Ascend,USR,Adtran, Kentrox,Livingston, Microcom,Computone,Verilink, IBM,Motorola,UDS,Codex,ATT,Paradyne,Hayes,Racal,GDC,Telebit,MultiTech, Sync/Tylink,Wellfleet,,Black Box,Micom, APC Batteries & More - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Resource pools
by Lists 15 Aug '00

15 Aug '00

Hi All, What's the best way to setup a dual PRI card with two different dialup numbers? In this case, I have one span on one directory number, and another on another number. Each number needs to route to a specific pool of modems. Seems innocent enough. I've configured up the PRI card as follows: Reserved Pool to Inbound Phone Number Mapping Pool ID Inbound Phone Number Pool Type ------- -------------------------- --------- 1 11111111 Analog 2 22222222 Analog 3 ? None (where the appropriate numbers have been substituted) Modem mappings as follows: Quad B-Channel Modem/ I-Modem Reserved Pool Assignments ID Slot/ Pool_ID ID Slot/ Pool_ID ID Slot/ Pool_ID ID Slot/Pool_ID Chan Chan Chan Chan 1 1/1 0 17 5/1 1 33 9/1 2 49 13/1 2 2 1/2 0 18 5/2 1 34 9/2 2 50 13/2 2 3 1/3 0 19 5/3 1 35 9/3 2 51 13/3 2 4 1/4 0 20 5/4 1 36 9/4 2 52 13/4 2 5 2/1 0 21 6/1 1 37 10/1 2 53 14/1 2 6 2/2 0 22 6/2 1 38 10/2 2 54 14/2 2 7 2/3 0 23 6/3 1 39 10/3 2 55 14/3 2 8 2/4 0 24 6/4 1 40 10/4 2 56 14/4 2 9 3/1 1 25 7/1 1 41 11/1 2 57 15/1 0 10 3/2 1 26 7/2 1 42 11/2 2 58 15/2 0 11 3/3 1 27 7/3 1 43 11/3 2 59 15/3 0 12 3/4 1 28 7/4 1 44 11/4 2 60 15/4 0 13 4/1 1 29 8/1 2 45 12/1 2 61 16/1 0 14 4/2 1 30 8/2 2 46 12/2 2 62 16/2 0 15 4/3 1 31 8/3 2 47 12/3 2 63 16/3 0 16 4/4 1 32 8/4 2 48 12/4 2 64 16/4 0 When I place a call to the first number, I get (PRI debug): uccu_get_new_uccb: attach uccb to head of list. tcid: 0x8 ucid: 0x00000008 uccu_get_new_uccb: ALLOC tcid: 0x8 ucid: 0x00000008, allocated = 1, dsl_id=0 sfn:ucc_null,evt:20-SETUP_IND,tcid:0x8,ucid:0x00000008 ucc_setup_in_call: tcid: 0x8, CRV: 22 (0x16) DNIS nums:4 cl type override nums:0 ucc_setup_in_call: ANI (calling_phnum) >362347174<, len = 9, err = 0x32d84 uccidm_search_DNIS_reserved_pool: len_called_num = 8: stripped inbound phone >64719200<, len = 8 uccidm_search_DNIS_reserved_pool: local stripped DNIS >64719200<, len = 8 ucc_route_to_DNIS_reserved_pool: activated: reserved pool ID/type: [1/1], DNIS: >64719200< ds0_res_call_type: dsl: 0, intid: 0, ds0: 8, bct: 73, err: 0 verdict: 1 uccidm_reserve_ds0: SUCCESS: call_type: ANALOG, span=0, ds0=9, in_flag=1 ucc_route_to_DNIS_reserved_pool: no anlg mdm available in pool 1... trying I-mdm UCCM_BUILD_TODEV_NSF_IE: compand code used = 0 (0=A-law,1=U-law,2=country) GetDS0SlotMapByte: mdm_id=11 span=0 ds0=9 octet=3 bitmap=0 GetDS0SlotMapByte: mdm_id=11 span=0 ds0=9 octet=2 bitmap=0 GetDS0SlotMapByte: mdm_id=11 span=0 ds0=9 octet=1 bitmap=1 GetDS0SlotMapByte: mdm_id=11 span=0 ds0=9 octet=0 bitmap=0 ucc_route_to_DNIS_reserved_pool,send usr_X_setup_con_req to dev ucc_route_to_DNIS_reserved_pool:tcid:0x8,ucid:0x00000008,sp:0,b:9,tts:3,dt:4,s/c:3/4,hdl:3 <PH_ERROR> ph_frame__post_xmit: datagram: frame t/p: 8/0030:001e48ec, status >0x04< NOTE:uccpbus_disconnected func called, hdl:3,status:155 NOTE:uccpbus_closed_cb func called, hdl:3,status:0 NOTE:uccpbus_opened_cb func called, hdl:3,status:0 As best I can tell, it's getting the DNIS OK, and mapping it to the right pool, but just not finding any modems in the pool. The modems are defined to the PRI as Quad-I-modems, and are active in the NETserver. All modems are set for PRItdm as the interface type. This chassis has two NETservers - one for each dialup number. PRI card is at 3.1.5, Netserver at 3.8.1. This must be simple, surely? I'm obviously missing something - anyone know what? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0