- USR-TC - mailman.xmission.com

(usr-tc) Modem OID
by Blake Fithen 24 Aug '00

24 Aug '00

Hello, does anyone know of an OID to get the number of modems active on an individual Hiper DSP card? TIA, blake - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 6

(usr-tc) Cisco 7206 for sale
by Denis Newkirk 24 Aug '00

24 Aug '00

I still have the USR TC Chassis about to be shut down (sold business). I also have a Cisco 7206 for immediate sale as well as two 1601s with T1 WIC Cards. Please reply direct if anyone is interested. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) HARC upgrade
by Scot Desort 24 Aug '00

24 Aug '00

I'm preparing to upgrade my HARC from 4.1.59 to the 5.0 code. In the release notes, it states that I may have to do an interim upgrade, depending on the flash memory in my HARC. It says to do a sh mem on the HARC to see if I have 8meg or 16 meg. But when I do a sh mem, I get this: Total System Memory Resources: 118418 KB Free Memory: 95516 KB Code Size: 3815 KB Initialized Data Size: 646 KB Uninitialized Data Size: 3844 KB Stack Size: 512 KB So, where does it show the flash memory size? Is it implied at 8 megs (3815 + 646 + 3844)? Anybody know? -- Scot - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 12

Re: (usr-tc) problem with packet filter and radius
by Mr DOL 23 Aug '00

23 Aug '00

Did you remove dun/tcp from customer pc then reinstall it? At 02:25 PM 8/23/2000 -0700, you wrote: >I am using a U.S. Robotics Total Control with NETServer Card V.34/ISDN >with Frame Relay V3.3.28. For authentication, I use a RADIUS server, >Livingston RADIUS 2.1 1999/6/23. > >On my Total Control, I have the following filter: > >ct1> show filter filter1 >- IP rules - > 1 permit 0.0.0.0/0 192.150.81.179/32 tcp > 2 permit 192.150.81.179/32 0.0.0.0/0 tcp > 3 deny 0.0.0.0/0 0.0.0.0/0 ip > >I have the following entry in the users file: > >perks4u Password="xxx" > Framed-Protocol = PPP, > Framed-Filter-Id = "filter1", > Framed-Netmask = 255.255.255.255 > User-Service-Type = Framed-User > >When I try to dial in as this user, I get connected, then immediately >disconnected. The following appears in the syslog: > >Aug 23 13:15:05 ct1 acct 02000160 dialnet: port S9 perks4u >succeeded dest 206.43.246.26 >Aug 23 13:15:06 ct1 remote_connect: Packet filter does not >exist. User perks4u disconnected. > >If anyone can shed some light as to why the NAS is claiming that the >filter doesn't exist when it clearly does, that would be appreciated. > >_.,+=~`^"-.,_.,+=~`^"-*.,_.,+=~'`^"-.,_.,+=~`^"-.,_.,+=~`^"- >Jesse Schachter .,. Systems Administrator >The Protosource Network .,. Main Number: (888) 643-8558 ><JSchachter(a)PSNW.COM> .,. Fax: (559) 490-8630 >_.,+=~`^"-.,_.,+=~`^"-.,_.,+=~`^"-.,_.,+*=~`^"-.,_.,+=%~`^"- > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) problem with packet filter and radius
by Scott Trautman 23 Aug '00

23 Aug '00

You're not matching the filtername. You need both filter1.in filter1.out ...even if one of them is blank. It's looking for filter1.in, your filtername is only filter1 SMT Scott M. Trautman 800-482-4638 Global Dialog Internet 608-240-4638,4637fax 2810 Crossroads, STE LL2 scott(a)gdinet.com Madison WI 53718 http://www.gdinet.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) problem with packet filter and radius
by Jesse Schachter 23 Aug '00

23 Aug '00

I am using a U.S. Robotics Total Control with NETServer Card V.34/ISDN with Frame Relay V3.3.28. For authentication, I use a RADIUS server, Livingston RADIUS 2.1 1999/6/23. On my Total Control, I have the following filter: ct1> show filter filter1 - IP rules - 1 permit 0.0.0.0/0 192.150.81.179/32 tcp 2 permit 192.150.81.179/32 0.0.0.0/0 tcp 3 deny 0.0.0.0/0 0.0.0.0/0 ip I have the following entry in the users file: perks4u Password="xxx" Framed-Protocol = PPP, Framed-Filter-Id = "filter1", Framed-Netmask = 255.255.255.255 User-Service-Type = Framed-User When I try to dial in as this user, I get connected, then immediately disconnected. The following appears in the syslog: Aug 23 13:15:05 ct1 acct 02000160 dialnet: port S9 perks4u succeeded dest 206.43.246.26 Aug 23 13:15:06 ct1 remote_connect: Packet filter does not exist. User perks4u disconnected. If anyone can shed some light as to why the NAS is claiming that the filter doesn't exist when it clearly does, that would be appreciated. _.,+=~`^"-.,_.,+=~`^"-*.,_.,+=~'`^"-.,_.,+=~`^"-.,_.,+=~`^"- Jesse Schachter .,. Systems Administrator The Protosource Network .,. Main Number: (888) 643-8558 <JSchachter(a)PSNW.COM> .,. Fax: (559) 490-8630 _.,+=~`^"-.,_.,+=~`^"-.,_.,+=~`^"-.,_.,+*=~`^"-.,_.,+=%~`^"- - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) 3COM VSA Format
by Thomas C Kinnen 22 Aug '00

22 Aug '00

Anyone have a URL to a document on the VSA format used by 3COM? I've tried searching the 3COM site but have had no lock. -- Thomas C Kinnen - <tkinnen(a)lucentradius.com> <kinnen(a)lucent.com> [RADIUS Engineer] - LUCENT Technologies INS "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Comments on latest codes
by Verreault, John 22 Aug '00

22 Aug '00

I have heard of a few cases where the ARC reboots or seems to freeze with 5.0.9. It just happened to me once since I flashed the code (about 10 days ago) It seems to happen on loaded chassis' (10 DSPs) Has any one else experienced this ??? JOhn Verreault AEI Internet -----Original Message----- From: mmm3(a)cornell.edu [mailto:mmm3@cornell.edu] Sent: Tuesday, August 22, 2000 9:18 AM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) Comments on latest codes I'm running this on my test chassis and it appears to be fairly stable, except for the fact that my ARC spontaneously reboots on a random basis. I'm not sure if this is because of the new code or if I need to reflash the card. I was advised by 3Com to reflash and will probably do that at some point as I'd like to upgrade my production pool soon... >Before attempting to upgrade our USR chassis I thought it may be wise to ask >the list of their thoughts first. Is anyone running the following software >releases? If so, any input on stability or any known problems would be >greatly appreciated. > >NMC 7.1.8 >ARC 5.0.9 >DSP 2.1.9 > >-Cheryl >Network Administrator >SEI Communications Data and Network Services ********************************************************* Michelle M. Mogil Network and Computing Systems 735 Rhodes Hall, Cornell University, Ithaca, NY 14853 vox: (607) 255-0516, fax: (607) 255-8521 email: mmm3(a)cornell.edu ********************************************** - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Strange IP hopping in DUN
by Carl Jagerski 19 Aug '00

19 Aug '00

Hi Everyone, Got a strange one. First for me. We had a lot of customers dialing into Total Control Chassis and everything was OK. Also, have customers dialing into Ascend MAX 6068 Boxes and everything is OK with them too. Rescently we changed some lines around and the customers that were in the TC units are now dialing into the Ascend units. Abount 10% to 20% of the former TC box users are now having the strangest problem I've ever seen. Our Customer's DUN is setup with server assigned IP address and static DNS addresses. When they dial into the Ascend boxes now, it changes the IP address to static and assigns the first DNS number to it. Also, it moves the second DNS number to the first DNS slot and deletes the second. What's up with that ! When we correct it on the customer's machine, it changes right back when they dial in again. Has anyone seen this before? I am so confused right now I don't know which way to turn. TIA Carl Jagerski Network Administrator, Forward Communications carll(a)forcomm.net 724-378-4490 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) SNMP Trap processing software--
by Scott Trautman 19 Aug '00

19 Aug '00

Hi, Alarm Server is really starting to annoy the crud out of me. The latest ARC code creates spurious traps. I'm looking around at download.com and finding plenty of SNMP POLLING software, not much that's listing for SNMP Traps, which is what Alarm Server is SENDING. Something with enough flexability to import the MIB/dictionary would be great. Know of anything? Somebody better come up with something or I swear I'm opening up VB6 and then there'll be trouble! SMT Scott M. Trautman 800-482-4638 Global Dialog Internet 608-240-4638,4637fax 2810 Crossroads, STE LL2 scott(a)gdinet.com Madison WI 53718 <http://www.gdinet.com/> - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1