- USR-TC - mailman.xmission.com

Re: (usr-tc) rebooting a nmc card with snmp
by Michael Fingerson 11 Oct '00

11 Oct '00

Does this go before the reset or after? I couldn't find any documentation on setting this to 0 in the mib. This is what I show: nmcCmdParam OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..24)) ACCESS read-write STATUS mandatory DESCRIPTION "This object contains parameters that are specific to the particular command being issued. In some cases, there will be no additional parameters required." ::= { nmcCmd 5 } nmcCmdResult OBJECT-TYPE SYNTAX INTEGER{ none(1), success(2), inProgress(3), notSupported(4), unAbleToRun(5), aborted(6), failed(7) At 07:39 PM 10/9/2000 -0400, you wrote: >Try throwing .1.3.6.1.4.1.429.1.2.4.5 i 0 (cmdParam=0) in there too. >The force oid isn't required. > > >Mike Andrews (MA12) * mandrews(a)dcr.net * http://www.bit0.com/ >VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY >Dialup/ADSL/ISDN/T1 Internet access for Frankfort KY and surrounding counties >www.fark.com: If it's not news, it's Fark. (Or something like that.) > >On Mon, 9 Oct 2000, Michael Fingerson wrote: > > > (correction to the previous submission) > > > > Does anyone know the oid's to reset a NMC card? > > > > I have tried: > > > > snmpset hostname private .1.3.6.1.4.1.429.1.2.4.4 i 2 (force) > > snmpset hostname private .1.3.6.1.4.1.429.1.2.4.3 i 6 (software reset) > > > > I have been able to reset a dsp card with: > > > > snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.5.# i 1 (force) > > snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.4.# i 4 (reset) > > > > (where # is the slot # of the card being reset) > > > > > > > > > > > > > > > > Michael Fingerson > > Network Services Engineer mjfinger(a)rconnect.com > > 416 South Broadway Rochester, MN 55904 > > (507) 536-0000 x106 http://www.rconnect.com > > RURAL CONNECTIONS - a OneMain.com company > > > > > > - > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. Michael Fingerson Network Services Engineer mjfinger(a)rconnect.com 416 South Broadway Rochester, MN 55904 (507) 536-0000 x106 http://www.rconnect.com RURAL CONNECTIONS - a OneMain.com company - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Error codes on HDSP lamps?
by Jonathan Byrne 11 Oct '00

11 Oct '00

Does anyone know if lamp patterns on a HiperDSP have error code meanings? I have a situation where a HiperDSP (2.1.9) connected to a PRI has the lpbk/d-alm lamp on red. The telco (NTT) says there is no problem with the PRI and their tests indicate the CPE is not powered up. The NTT DSU shows no alarms. I have replaced the card with another one, and see the same problem. Moved it to another slot in the chassis. Same problem. If I power-cycle the card, I see the following after the boot process: rn/fl orange lpbk/d-alm red activity lamps (from the top) 3,4,7,8 red Then after a few seconds, rn/fl and car go to green, the modem activity lamps go out, and lpbk/d-alm stays red. The previous card exihibited the same behavior, and reflashing has no effect on this. Is this pattern of lights an error code or coincidence? This would all seem to indicate the PRI, but the telco says it's not. Any thoughts? TIA, Jonathan Byrne Engineering Division Exodus Communications K.K. http://www.exodus.co.jp/ Tel: +81 3-5334-1700 Fax: +81 3-5334-1702 Direct: +81 3-5334-1756 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 7

(usr-tc) 1000 Ports or more / what code are you running
by Marshall Morgan 11 Oct '00

11 Oct '00

ALL: On a DSP chassis with 2-14 DSP Cards (PRI or CT1) and 1-2 ARCs - IP only no RIP or OSPF routing protocols - what code version(s) - newer info required. NMC: ARC: DSP: Help me out - as I don't want to "upgrade" my customers to other ISPs due to our code problems. TIA. Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) "_"command
by Harry_Wang＠3com.com 10 Oct '00

10 Oct '00

Does anyone have a list of command which begin with "_", the only one I know is "_authentication". I think all these command should be very helpful for troubleshooting. Any idea is appreciated. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) rebooting a nmc card with snmp
by Michael Fingerson 09 Oct '00

09 Oct '00

(correction to the previous submission) Does anyone know the oid's to reset a NMC card? I have tried: snmpset hostname private .1.3.6.1.4.1.429.1.2.4.4 i 2 (force) snmpset hostname private .1.3.6.1.4.1.429.1.2.4.3 i 6 (software reset) I have been able to reset a dsp card with: snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.5.# i 1 (force) snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.4.# i 4 (reset) (where # is the slot # of the card being reset) Michael Fingerson Network Services Engineer mjfinger(a)rconnect.com 416 South Broadway Rochester, MN 55904 (507) 536-0000 x106 http://www.rconnect.com RURAL CONNECTIONS - a OneMain.com company - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) rebooting NMC with snmp
by Michael Fingerson 09 Oct '00

09 Oct '00

Does anyone know the oid's to reset a NMC card? I have tried snmpset hostname private .1.3.6.1.4.1.429.1.2.4.4 i 2 (force) snmpset hostname private .1.3.6.1.4.1.429.1.2.4.3 i 6 (software reset) I have been able to reset a dsp card with snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.5.# i 1 (force) snmpset hostname private .1.3.6.1.4.1.429.1.1.7.1.1.4.$ i 4 (reset) Michael Fingerson Network Services Engineer mjfinger(a)rconnect.com 416 South Broadway Rochester, MN 55904 (507) 536-0000 x106 http://www.rconnect.com RURAL CONNECTIONS - a OneMain.com company - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) WTB: USR Hiper Cards
by Steve Rivera -www.wrca.net 09 Oct '00

09 Oct '00

WR Communication Associates (WRCA) is looking to buy the following USR hardware: HIPER DSP Modem cards w/ nics. T1 or E1 Versions acceptable. HIPER ARC w/ nics Please email or call with available pieces or packages. Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com Worldwide Provider of Network Hardware Since 1981. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 5

(usr-tc) USR MP/8I problem with EuroISDN
by Oleg Polegenko 09 Oct '00

09 Oct '00

Hello List, Does anybody of this list use USR MP/8I with EuroISDN? Does the lastest firmware (2.5.10) for MP/8I work with EuroISDN (DSS1 switching)? I can't do that. Will be grateful for any ideas. Thank you. Oleg Polegenko ISP S-NET Ltd phone: +380 5366 24095 mailto: oleg(a)s-net.net.ua http://www.s-net.net.ua - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) WTB: USR Hiper Cards
by Steve Monkhouse 08 Oct '00

08 Oct '00

Yeah Ive bought from Steve before, he's very professional.. and we had no problems.. ( And if he gets some E1 DSP's in, Ill be back for them too ! ) :-) Steve Monkhouse - Network Engineer --------------------------------------------------------------------- EtherTech Computer Services Ph : +61-3-9768-2665 Fx : +61-3-9768-2664 http://www.ethertech.com.au -----Original Message----- From: Dan Irvin [SMTP:dirvin@123.net] Sent: Monday, 9 October 2000 02:55 To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) WTB: USR Hiper Cards Has anyone done business with this outfit? What price did you agree on? Did things go smoothly? Thanks -Dan David DenHollander wrote: > I have new Hiper DSP sets how many you need and what are you paying? > > At 02:38 PM 10/6/00 -0400, you wrote: > >WR Communication Associates (WRCA) is looking to buy the following USR > >hardware: > > > >HIPER DSP Modem cards w/ nics. > >T1 or E1 Versions acceptable. > > > >HIPER ARC w/ nics > > > >Please email or call with available pieces or packages. > > > >Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr > >(www.isp-networkhardware.com) > >Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com > >Worldwide Provider of Network Hardware Since 1981. > > > > > > > > > > > > > > > > > > > >Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr > >(www.isp-networkhardware.com) > >Email: srivera(a)wrca.net - Mobile Email: srivera711(a)hotmail.com > > > >Worldwide Provider of Network Hardware Since 1981. > > > > > > > > > > > > > > > > > > > > > > > > > > > >- > > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > > with "unsubscribe usr-tc" in the body of the message. > > For information on digests or retrieving files and old messages send > > "help" to the same address. Do not use quotes in your message. > > > > David DenHollander > > (403)254-1100 Main > (403)201-2815 Fax > > List your equipment for free > http://www.adoptable.com/ > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) The connection for call id 219549253, on if slot:14/mod:23 was dr opped for user - after successful RADIUS authentication
by Scott Trautman 05 Oct '00

05 Oct '00

Hi, I seem to have seen this before, can't recall for the life of me what this ended up meaning. Sequence on this call: Sep 13 08:53:19 lkm-ha1 At 13:49:00, Facility "Auth Facility", Level "VERBOSE":: A call, call id = 219549253, has arrived on interface slot:14/mod:23 Sep 13 08:53:38 lkm-ha1 At 13:49:19, Facility "Auth Facility", Level "COMMON":: A call is established, call id 219549253, on interface slot:14/mod:23 Sep 13 08:53:38 lkm-ha1 At 13:49:20, Facility "Auth Facility", Level "COMMON":: The connection for call id 219549253, on if slot:14/mod:23 was dropped for user UNKNOWN Doing a trace (mon ppp), I see: User Name: [Prrrrbj ] Monitoring user Prrrrbj. Decode tracing started, press ESCAPE to stop; press X for hex tracing. ....Tracing for user "Prrrrbj"; Escape to stop... Outgoing PPP Data on interface: slot:14/mod:23 PAP ACK Outgoing PPP Data on interface: slot:14/mod:23 IPCP CFG_REQ COMPR_TYPE 00 2d 0f 00 NEW_ADDRS 9c 2e b9 01 Incoming PPP Data on interface: slot:14/mod:23 LCP TERM_REQ Outgoing PPP Data on interface: slot:14/mod:23 LCP TERM_ACK It's saying to me the client is <requesting> to be terminated (suicide?) All their settings appear to be correct...definately is set to "let server assign" the IP address-- Any hints here as to what's going on? I hate to have someone rip out their dialup networking if I don't have a good reason for it. Anyone seen this before Thanks!! Scott M. Trautman 800-482-4638 Global Dialog Internet 608-240-4638,4637fax 2810 Crossroads, STE LL2 scott(a)gdinet.com Madison WI 53718 <http://www.gdinet.com/> - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 8