- USR-TC - mailman.xmission.com

(usr-tc) Arc 4.x version?
by Charles Sprickman 30 Apr '01

30 Apr '01

Hi, I'm sitting at: System Version: V4.2.32 Built on Aug 16 1999 at 17:19:37 First, is this the same as "4.2.32-1" on the totalservice site? I'm not looking for any additional features other than ospf. Am I best where I'm at or should I go with 4.2.73? I found the release notes on 4.2.73, and don't see any issues resolved, just a list of still-outstanding issues... Thanks, Charles | Charles Sprickman | Internet Channel | INCH System Administration Team | (212)243-5200 | spork(a)inch.com | access(a)inch.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) Gateway ends "Stupid" policies...
by Jeff Mcadams 26 Apr '01

26 Apr '01

Gee, Gateway figured out that customer satisfaction really *is* important, maybe there's hope for 3Com/CommWorks' stupid support contract policies as well! http://dailynews.yahoo.com/h/cn/20010426/tc/gateway_ends_quot_stupid_quot_p… -- Jeff McAdams Email: jeffm(a)iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Hiper Arc booting into Debug mode???
by Timothy C. Bohen 26 Apr '01

26 Apr '01

I just picked up a couple used Hiper Arcs, they look to be almost brand new but they both do the same thing. They boot into a debug mode and show up in TCM as question marks on the chassis. I can talk to them via the console port but all I have are like 5 commands. And even if I do a soft reboot from the console they just come back up in the debug mode?? Thanks in advance. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 1

RE: (usr-tc) IPIP Tunneling
by Brian Becker 26 Apr '01

26 Apr '01

Each of our TC boxes is behind a Cisco 1700 router. Could we possible do the IPIP tunnel from the Cisco then? Thanks, Brian Brian Becker President, Poplar Bluff Internet, Inc. (www.semo.net) Home of TotallyFabricated.com Software: Total Scrutinizer (www.TotalScrutinizer.com) - Tech Support Just Got Easier! WebGabber (www.WebGabber.com) - html-based Chat Software -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Jeff Mcadams Sent: Thursday, April 26, 2001 12:16 PM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) IPIP Tunneling Also sprach Brian Becker >I was at ISPCon this spring and asked CommWorks if the TC box did IPIP >tunneling and was told by several (non-sales people) that it did. I >can't find any documentation on it, can someone lend a helping hand? Hrmm...I think maybe you were misunderstood. :/ Unless this is something new since 5.0.9 since I don't have any Arcs running anything newer (Say "NO!" to software extortion! ;). The Arcs to L2TP, PPTP, and VTP, but not IPIP that I'm aware of. -- Jeff McAdams Email: jeffm(a)iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) IPIP Tunneling
by Brian Becker 26 Apr '01

26 Apr '01

I was at ISPCon this spring and asked CommWorks if the TC box did IPIP tunneling and was told by several (non-sales people) that it did. I can't find any documentation on it, can someone lend a helping hand? Brian Brian Becker President, Poplar Bluff Internet, Inc. (www.semo.net) Home of TotallyFabricated.com Software: Total Scrutinizer (www.TotalScrutinizer.com) - Tech Support Just Got Easier! WebGabber (www.WebGabber.com) - html-based Chat Software - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Bridged or routed connections?
by Mark Thornton 26 Apr '01

26 Apr '01

I have run into a problem in my network that appears to be caused by my DSL router having the connections appear as bridged instead of routed. It is causing a throughput bottleneck of 50 to 70%. This is causing me to analyze my entire network configuration. Do the connections to a TCH on the HiperArc appear as routed connections, or as bridged connections? Mark Thornton San Marcos Internet, Inc. 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 3

(usr-tc) Netserver oddities
by Phil Moss 26 Apr '01

26 Apr '01

Hi all, I've currently got a netserevr that's showing some oddities. I can log into our system through the netserver with ISDN but when I try with a normal analogue modem it doesn't work. Testing with a FreeBSD box I get the following message; "*** Host Is Currently Unavailable ***" when using a normal username and no password is asked for. If I try using the !root manager username/password I get into the netserver the same as if I telneted in. As we've only got two of these beasts I don't really know that much about them. Any help is appreciated. Phil -- ------------------------------------------------------------------------ Philip Moss email: pmoss(a)clara.net Systems Administrator phone: 020 7903 3015 ClaraNET UK - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

Re:(usr-tc) commworks lists
by hjqlopez＠runbox.com 26 Apr '01

26 Apr '01

> Hi, > > Does anyone know what the deal is with the ras(a)support.csocsg.com list? > > I found archives, but they don't go back too far, and majordomo over there > only knows of the following lists, which don't seem to include ras or > anything related... > > >>>> lists > Majordomo(a)support.csocsg.net serves the following lists: > > adelphia > agns_voip > att3comops > cdma40beta > cw5k > edgeserver26 > iwfbeta > mciw_voip > tcs43 > telefonica_voip > test > uunet-escalation > voipsupport > vpp_beta > > Thanks, > > Charles > Hello, I think that the following message from ras(a)support.csocsg.net can help you: " To voip(a)support.csocsg.net, cdma(a)support.csocsg.net, cable(a)support.csocsg.net, ras(a)support.csocsg.net, dsl(a)support.csocsg.net, Bill_Kapsalis(a)3com.com From Lance_Laureys(a)3com.com Date Thu, 15 Feb 2001 10:39:22 -0600 Reply-To ras(a)elroy.csocsg.net Sender owner-ras(a)support.csocsg.net Dear Totalservice Mail List users, The following mail lists have been moved to a new server: voip cdma cable dsl ras In the past you email listname(a)totalservice.3com.com. This has now changed to listname(a)support.csocsg.net. Example: voip(a)totalservice.3com.com is now voip(a)support.csocsg.net Previous archives were purged and the new archives can be found at https://support.csocsg.3com.com/majordomo/archive/listname Any questions you may have, please feel free to notify me. Lance Laureys _________________________________________________ To unsubscribe from ras send a message to: majordomo(a)elroy.csocsg.net with the word 'unsubscribe ras' in the body of the message. Do not put anything as the subject." Regards, Humberto Quintana IPTotal ----------------------------------------------- Runbox Mail Manager - www.runbox.no Gratis epost-tjeneste - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 8

RE: (usr-tc) DUN 718 and 720 errors
by Mark E. Levy 25 Apr '01

25 Apr '01

> Seems I'm rebooting DSP cards quite frequently. I've been > standing next to > chassis and watched a DSP card just reboot all on its own. > Of coarse no > calls can come in unless I go to TCM and do a Hdwr reset manually. I > rebooted the ARC 3 days ago, (Monday), hoping that would repair dico > problems. What software/heardware revs are your DSPs at? How many cards in the chassis & how many power supplies? I have 4 DSPs and two 70-amp PS. I can't remember the last time I had to reboot any card in my TC, except for software upgrades. --------------------------------------------------------------------- Mark E. Levy, President FSInet, Inc. 800-827-6085 x202 847-753-6832 fax www.fsi.net mark(a)fsi.net --------------------------------------------------------------------- - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) IP assignment questions
by Mark E. Levy 24 Apr '01

24 Apr '01

> At 09:46 PM 4/24/01 -0500, Mark E. Levy wrote: > >> 1. I have a chassis with a current address pool of 96 > >> addresses. The /24 > >> the pool is taking from has no more available addresses. I > >> want to swap it > >> out for a 200 address pool from another /24. How do I do this? > > > >Create a new pool using the new address block. Delete the > existing block. It > >won't actually delete, because some of the addresses will be > in use. As soon > >as the last user using the 'old' addresses logs off, the pool will be > >deleted. > > > >> 2. I have a dedicated ISDN user that needs 60 routable > >> addresses for his > >> LAN. Preferably, the assigned /26 would be from a seperate > >> /24 than the one > >> his static dial-up IP is from. What do I need to set up on > >> the ARC so it > >> routes his /26 through the static IP? Would it be easier to > >> just make his > >> static IP the initial address in the /26 with a > 255.255.255.192 mask? > > > >Nothing on the ARC, just set up the radius entry thusly: > > > >user Auth-Type = System > > User-Service-Type = Framed-User, > > Framed-Protocol = PPP, > > Framed-Address = xxx.xxx.xxx.xxx, <== first > address of static > >block > > Framed-Netmask = 255.255.255.192, > > Framed-Routing = None, > > Framed-Compression = Van-Jacobsen-TCP-IP, > > Framed-MTU = 1518, > > Session-Timeout = 28800 > > I'd still need to set up a route in my Cisco to the lead > address, correct? > Or, would the ARC "announce" the block? If you have routing turned on (RIP or OSPF) the ARC should advertise the route. I'd make sure that your Cisco 'sees' it with 'show ip route xxx.xxx.xxx.xxx' or 'show ip route rip/OSPF'. --------------------------------------------------------------------- Mark E. Levy, President FSInet, Inc. 800-827-6085 x202 847-753-6832 fax www.fsi.net mark(a)fsi.net --------------------------------------------------------------------- - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0