- USR-TC - mailman.xmission.com

(usr-tc) Remote POP backhaul via ISDN?
by Mark Thornton 17 May '01

17 May '01

I seem to remember that it should be possible to create a MPIP bundle between two TCHubs for the purpose of creating a temporary backhaul link. Is this true and has anyone ever done it? Mark Thornton San Marcos Internet, Inc 512-393-5300 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) FS: HD 130A Hiper Bundle, DSp, Arc, EdgeServer PRO
by ISP-NetworkHardware.com 15 May '01

15 May '01

WRCA.NET has the following in stock: $7500 High Density Chassis Dual 130A Power NMC Hiper ARC 2x Hiper DSP Hiper DSP $2500 Hiper ARC $1250 EdgeServer PRO $1500 70A Power sets $250 / $450 for pair 130A Power Sets $500each 45A Dual Power sets w/ chassis $200 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) USR Netserver 16 analog.. radius...Acct-Input-Octets and
by LIST 14 May '01

14 May '01

Please a litle question... I use the netserer 16 anolog.. and wotk fine with radius. ( iam using icradiun now ).. but netserver box not send for radius the "Acct-Input-Octets and Acct-Input-Octets" RADIUS in a accounting request packet... In this box is possible activate this?? I want do a traffic monitor for my users.. Any help, thaks.. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) WTB: USR Netserver 16's and Netserver 8's
by ISP-NetworkHardware.com 14 May '01

14 May '01

WRCA.NET is looking to buy the following USR communication hardware: Netserver 16 v34 Netserver 16 v34 Plus Netserver 8 v34 Netserver 8 v34 Plus If you have please email me off list. srivera(a)wrca.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) SNMP Trap host
by Steve Johnson 11 May '01

11 May '01

Hi, I'm trying to setup my TC1000 gear to log SNMP traps to a trap host, I assumed the command was set snmP trAP_COMMUNITY public addRESS address.to.our.host But I get this error.. CLI - Request SET SNMP TRAP_COMMUNITY failed because item is not in table What am I doing wrong? -Steve -- Steve Johnson - linuxnut(a)sonic.net Sonic.net, Inc. System Administrator 300 B Street #100 707.522.1000 (Voice) Santa Rosa, CA 95404 707.547.2199 (Fax) http://www.sonic.net/ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2

(usr-tc) Extra netserver 16's?
by albert 11 May '01

11 May '01

Hello,... If you have any extra/pulled/working USR Netserver 16 units available for sale, please give me a call. albert/brenda zegiel FARMPRIDE PRODUCTS 223 MAIN STREET GAYS MILLS, WISCONSIN, 54631 ph-1-608-735-4667 fx 735-4994 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) HiperDSP snmptraps
by Phil Moss 09 May '01

09 May '01

Hi, I'm trying to set up snmptraps on our hiperDSPs. I'm trying to trap line alarms (yellow, red, LOS) and can set these up by in tcm by selecting the span leds and fault->Trap Settings menu item. I can then recieve the traps when I pull the plug. What's not happening is the settings aren't being saved so if I reboot the card I need to reset all the traps. Thanks, Phil -- ------------------------------------------------------------------------ Philip Moss email: pmoss(a)clara.net Systems Administrator phone: 020 7903 3015 ClaraNET UK - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) Total Control Opinions
by Robbie Wilson 08 May '01

08 May '01

Thats where I got that quote from, does the number of DSP's count? How has their support been? ---- Original Message ---- From: seth.jacobs(a)onramp113.org To: usr-tc(a)lists.xmission.com, Subject: Re: (usr-tc) Total Control Opinions Date: Tue, 8 May 2001 15:39:52 -0700 >We purchased our TC1000 through Source Technologies and the price >included a >full support contract for 1 year. CommWorks (3Com) has announced >that >companies other than 3Com (e.g., Source Technologies) will be able to >provide 24x7 technical support. Perhaps the cost of support will go >down >once it's offered by multiple companies. > >Seth > >----- Original Message ----- >From: "Robbie Wilson" <rwilson(a)oasisonline.com> >To: <usr-tc(a)lists.xmission.com> >Sent: Tuesday, May 08, 2001 2:21 PM >Subject: RE: (usr-tc) Total Control Opinions > > >> I was quoted $1400 a year, does that sound right? >> >> -----Original Message----- >> From: owner-usr-tc(a)lists.xmission.com >> [mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Charles Kimes >> Sent: Tuesday, May 08, 2001 4:24 PM >> To: usr-tc(a)lists.xmission.com >> Subject: Re: (usr-tc) Total Control Opinions >> >> >> We are satisfied with ours as well...We have been using our >original TC >> purchased in 1997 as well as another in 1999 and no major >problems, using >> both Netserver and ARC. I would like to warn you in advance, >though, that >> unless you are willing to purchase an overpriced service contract, >3Com's >> software upgrade policies are totally asinine. Free for a short >period if >> you purchase the chassis, but that's it. >> >> At 01:00 PM 5/8/01 -0700, you wrote: >> >We've been satisfied with ours. We've found it to be stable. >We're >under >> a >> >support contract and have found the technical support to usually >be very >> >good to outstanding. >> > >> >I would like to see more documentation. We're considering >attending one >of >> >the multi-day training sessions. >> > >> >Seth >> > >> >----- Original Message ----- >> >From: "Robbie Wilson" <rwilson(a)oasisonline.com> >> >To: <usr-tc(a)lists.xmission.com> >> >Sent: Tuesday, May 08, 2001 12:54 PM >> >Subject: (usr-tc) Total Control Opinions >> > >> > >> > > I am currently using pm3's and due to their untimely EOL I am >> considering >> >a >> > > Total Control 1000. How do you like yours? Is it stable? Do >users >get >> >good >> > > connect rates/ have trouble connecting/disconnecting? >> > > >> > > Thanks for you time >> >> >> Charles Kimes, Administrator >> EagleNet DataCommunications, Inc. >> St. Marys, GA >> Administrator(a)eagnet.com >> www.kingsbay.net >> (912) 882-8406 >> >> >> - >> To unsubscribe to usr-tc, send an email to >"majordomo(a)xmission.com" >> with "unsubscribe usr-tc" in the body of the message. >> For information on digests or retrieving files and old messages >send >> "help" to the same address. Do not use quotes in your message. >> >> >> - >> To unsubscribe to usr-tc, send an email to >"majordomo(a)xmission.com" >> with "unsubscribe usr-tc" in the body of the message. >> For information on digests or retrieving files and old messages >send >> "help" to the same address. Do not use quotes in your message. > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) TSMON
by Kevin Hemsley 07 May '01

07 May '01

Is anyone using TSMON? We have been using TSMON for quite a while. Squashduck seems to have dried up. I am having some problems with HyperARCs and wanted to confirm the configuration options. We are running 2.2b18 which I think was the last release he put out. It isn't recognizing all the active ports. Does anyone have a config snippit they would be willing to share. I have tstype set to USRHiPerCard and I have played with different port settings, but can't seem to get it to see all the ports on my HyperARCs. I thought things were working fine. It has run so long without any babying that maybe I just haven't noticed that it wasn't working correctly. With no source to work with, it may eventually have to be replaced with something else. ---------------------------------- Kevin Hemsley Systems Engineer Microserv Computer Technologies, Inc. kev(a)ida.net KB7TYA - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 6

(usr-tc) NEW - 3Com Multi-Span96 port DSP (Available Now)
by ISP-NetworkHardware.com 07 May '01

07 May '01

I have a couple of New 3Com Multi-Span 96 DSP modem cards available. Available now, Shipping from NJ. Part Number # 3C0504222-00 Will beat any price!!! That's any price. I purchased from DOT.BOMB, Never USED. FULL FACTORY WARRANTY. Email if interested. srivera(a)wrca.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0