- USR-TC - mailman.xmission.com

(usr-tc) need TC rackmount 32 information
by albert 03 May '01

03 May '01

Hello... we need information,... software/firmware / manual, or any links you may have that you can share with us..nothing left at the USR site on them,.. this is for the older USR total control rackmount 32 sets. albert. albert/brenda zegiel FARMPRIDE PRODUCTS 223 MAIN STREET GAYS MILLS, WISCONSIN, 54631 ph-1-608-735-4667 fx 735-4994 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 1

(usr-tc) Whats a good way to get rid of old Quad equipment
by Tom Schmidt 03 May '01

03 May '01

I am looking to get rid of my older Quad modem racks. They all function fine. Anyone have suggestions on what is a good way to get rid of them?

11 13

Re: (usr-tc) without Netserver
by eric＠dol.net 03 May '01

03 May '01

That is correct. At 07:07 AM 5/3/01 -0600, you wrote: >Or the netserver card. You'll have to pull one of the quad modems to fit >the netserver or the hiper arc into the chassis, right? > >On Thu, 3 May 2001, Trade Projesom wrote: > >> So the Hiper ARC card is also necessary. >> >> Omar Perez >> Projesom Internet Ltda >> >> >> ----- Original Message ----- >> From: <eric(a)dol.net> >> To: <usr-tc(a)lists.xmission.com> >> Sent: Wednesday, May 02, 2001 6:55 PM >> Subject: Re: (usr-tc) without Netserver >> >> >> > No the netserver card is the router like the arc is the router. >> > The nmc controls the chassis but not the routing or authentication. >> > eric >> > >> > >> > >> > At 02:05 PM 5/3/01 +0500, you wrote: >> > >RE: (usr-tc) Frozen NMCsHI all, >> > > >> > >I just want to know whether NMC can do routing?. As I have received a >> chasis from my parent company in which there is 1 Dual PRI card, 15 Quad >> modem cards and NMC in 17th slot. I have been using Netserver PRI card in my >> 20 other chasis. But this time I didn't receive any Netserver card. So is it >> possible to do routing without Netserver Card? >> > > >> > >Nauman. >> > ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> >> > ><HTML><HEAD><TITLE>RE: (usr-tc) Frozen NMCs</TITLE> >> > ><META content="text/html; charset=iso-8859-1" http-equiv=Content-Type> >> > ><META content="MSHTML 5.00.2920.0" name=GENERATOR> >> > ><STYLE></STYLE> >> > ></HEAD> >> > ><BODY bgColor=#ffffff> >> > ><DIV><FONT face=Arial size=2>HI all,</FONT></DIV> >> > ><DIV> </DIV> >> > ><DIV><FONT face=Arial size=2>I just want to know whether NMC can do >> routing?. As >> > >I have received a chasis from my parent company in which there is 1 Dual >> PRI >> > >card, 15 Quad modem cards and NMC in 17th slot. I have been using >> Netserver PRI >> > >card in my 20 other chasis. But this time I didn't receive any Netserver >> card. >> > >So is it possible to do routing without Netserver Card?</FONT></DIV> >> > ><DIV> </DIV> >> > ><DIV><FONT face=Arial size=2>Nauman.</FONT></DIV></BODY></HTML> >> > > >> > >> > >> > - >> > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> > with "unsubscribe usr-tc" in the body of the message. >> > For information on digests or retrieving files and old messages send >> > "help" to the same address. Do not use quotes in your message. >> > >> >> >> - >> To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" >> with "unsubscribe usr-tc" in the body of the message. >> For information on digests or retrieving files and old messages send >> "help" to the same address. Do not use quotes in your message. >> > >----------------------------------------------- >Patrick C. Wolf SDC Internet >pwolf(a)sdc.org 722 N California Suite 4 >(505) 838-1620 Socorro, NM 87801 > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) without Netserver
by eric＠dol.net 03 May '01

03 May '01

No the netserver card is the router like the arc is the router. The nmc controls the chassis but not the routing or authentication. eric At 02:05 PM 5/3/01 +0500, you wrote: >RE: (usr-tc) Frozen NMCsHI all, > >I just want to know whether NMC can do routing?. As I have received a chasis from my parent company in which there is 1 Dual PRI card, 15 Quad modem cards and NMC in 17th slot. I have been using Netserver PRI card in my 20 other chasis. But this time I didn't receive any Netserver card. So is it possible to do routing without Netserver Card? > >Nauman. ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> ><HTML><HEAD><TITLE>RE: (usr-tc) Frozen NMCs</TITLE> ><META content="text/html; charset=iso-8859-1" http-equiv=Content-Type> ><META content="MSHTML 5.00.2920.0" name=GENERATOR> ><STYLE></STYLE> ></HEAD> ><BODY bgColor=#ffffff> ><DIV><FONT face=Arial size=2>HI all,</FONT></DIV> ><DIV> </DIV> ><DIV><FONT face=Arial size=2>I just want to know whether NMC can do routing?. As >I have received a chasis from my parent company in which there is 1 Dual PRI >card, 15 Quad modem cards and NMC in 17th slot. I have been using Netserver PRI >card in my 20 other chasis. But this time I didn't receive any Netserver card. >So is it possible to do routing without Netserver Card?</FONT></DIV> ><DIV> </DIV> ><DIV><FONT face=Arial size=2>Nauman.</FONT></DIV></BODY></HTML> > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

RE: (usr-tc) FS: USR Hiper DSP's, Hiper ARC's, Hiper Bundles, EdheServer PRO
by ISP-NetworkHardware.com 02 May '01

02 May '01

The quad bundle are full 48 port, v90. I know it s a great price but I have too many in stock right now. Doing some spring cleaning. All guaranteed. -----Original Message----- From: Laszlo Vecsey [mailto:masterone@rcn.com] Sent: Wednesday, May 02, 2001 1:23 PM To: sales(a)isp-networkhardware.com Subject: Re: (usr-tc) FS: USR Hiper DSP's, Hiper ARC's, Hiper Bundles, EdheServer PRO Question, how many quads are in each bundle, six? ----- Original Message ----- From: "ISP-NetworkHardware.com" <sales(a)isp-networkhardware.com> To: "us-tc" <usr-tc(a)lists.xmission.com> Sent: Wednesday, May 02, 2001 12:57 PM Subject: (usr-tc) FS: USR Hiper DSP's, Hiper ARC's, Hiper Bundles, EdheServer PRO > I have the following in stock. Clean,Tested and air packed. > This is a partial listing of our extensive Total Control Inventory. > If your looking for something and dont see it listed shoot me an email. > I am confident I have it :) > > 5- HIPER DSP $2500 > 5- HIPER DSP $3600 (NEW) > 5- HIPER ARC $1100 > 3- HIPER NMC $700 (NEW) > 3- HIPER Bundles $7500 > 2- EdgeSever PRO $3500 (Fully Functional NT RAS Server) > 5- Quad Digital Bundles $1500 > > Steve Rivera > 732-833-2111 x102 > sales(a)isp-networkhardware.com > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) FS: USR Hiper DSP's, Hiper ARC's, Hiper Bundles, EdheServer PRO
by ISP-NetworkHardware.com 02 May '01

02 May '01

I have the following in stock. Clean,Tested and air packed. This is a partial listing of our extensive Total Control Inventory. If your looking for something and dont see it listed shoot me an email. I am confident I have it :) 5- HIPER DSP $2500 5- HIPER DSP $3600 (NEW) 5- HIPER ARC $1100 3- HIPER NMC $700 (NEW) 3- HIPER Bundles $7500 2- EdgeSever PRO $3500 (Fully Functional NT RAS Server) 5- Quad Digital Bundles $1500 Steve Rivera 732-833-2111 x102 sales(a)isp-networkhardware.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

Re: (usr-tc) Quad Analog Modem Problems
by eric＠dol.net 01 May '01

01 May '01

Try reflashing the cards through tcm. That has helped me with some modems that seem to flake out. It could be that the card has gone bad and needs to be replaced. eric At 12:12 PM 4/30/01 +1000, you wrote: >Hi, >I am having problems with some Quad Analog modem cards that I have installed, >I cannot get them to stay active I do set modem s49 active and it all appears to work, then I save >and reset then I get whats below. >the modems report A/I/P then after a reset they go A/A/P but I cant get them A/R/P. > >Basically the modem is not active because it cannot successfully negociate with the packet bus(I >think). >after a reset my syslog reports: >Apr 28 14:05:19 dialup9.dataheart.net S49 packet bus handle opened. Handle = 26. > >After this the netserver reports the modem as active all though there is still no HDLC Framing and >the interface is still set to Unassigned instead of ptp49 as it usually is. >then 30 seconds later: >Apr 28 14:05:49 dialup9.dataheart.net S49 packet bus failed to connect! stat=-1 >Apr 28 14:05:49 dialup9.dataheart.net S49 packet bus handle closed. > >now the netserver reports it as inactive again. > >I have Quad Digital/Analog cards working fine in the same chassis but these Quad Analogs are just >not co-operating. > >any help would be appreciated, >the 3com knowledgebase has not helped me. >Thanks, >Aaron Daniels > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 5

(usr-tc) v.92 for quads update
by Jeff Mcadams 01 May '01

01 May '01

OK... My email that I sent regarding the quads and v.92/v.44 to Al and Irfan, my sales rep. and my VAR rep. This was in response to my sales rep's message about the disposition of v.92/v.44 and what trade-ups were available. I have gotten no substantive feedback regarding this issue yet. Previous messages of mine have made it to some other 3Com/CommWorks reps and were apparently forwarded to my reps with the implication that they need to keep me in line. :) Let me assure any 3Com/CommWorks folks reading this (unofficially, of course, since 3Com/CommWorks doesn't officially monitor this list anymore). If it weren't for Tom Goodman and George Ebert and their efforts, I would have quit using Total Control gear *LONG AGO*. Tom and George have gone way above and beyond the call of duty to try to keep me happy with Total Control gear, unfortunately, they've been hamstrung by 3Com/CommWorks policies regarding equipment EOL'ing, trade-ups, and support contracts. To be quite honest, I think I was rather restrained in not expressing my thought that Al Huefner should have been fired years ago for personally being the number 1 reason for customers switching from Total Control to other Access Server vendors. As I understand it, Al is personally responsible for the support contract policies and Terms and Conditions that we've all screamed and yelled about for the past 3 years. Anyway...here we go...my entry into the "Let's piss off 3Com/CommWorks" contest. :) ------------------------------------------------------------------------ Also sprach Thomas_Goodman(a)3com.com >TCS 4.5 is where CommWorks will deliver v.92. Only HiPer DSPs and >Multi-Span cards will have the v.92 support. We have a Quad rebate >program that turns each port into $25/port which is $100/card or $1,200 >on a 48 port chassis. >http://commworks.com/svprovider/products/rac2/tc1000_v92.html >http://commworks.com/svprovider/programs/total_control_eds/promos.html I find this humorous: "With a simple software upgrade to V.92/V.44" OK, So, with 2,162 total dial-in lines, you want me to spend $136,800(*) dollars to upgrade my equipment to be able to handle v.92/v.44. You call this a "simple software upgrade?" The EOL'ing of the quad modem cards is absolutely reprehensible, and I'd like to hear from Irfan or Al if they could come up with *ANY* good reasons that I shouldn't ditch my 3Com gear and go with Cisco's trade-up program and get *MUCH* better support of not-bleeding-edge-new gear. This in addition to your extortionate Terms and Conditions and pricing of support contracts to begin with. I'd like to hear some sort of response from Irfan or Al since my last messages to either of you have seem to fallen on deaf ears. (*) Based on needing to upgrade 17 chassis worth of quad modems, utilizing 5 double-play trade-ups from the promo page from above, plus another 12 double-play purchases not eligible for the double-play trade-up. This assumes a 30% discount off of the list price posted on the promo page. I don't know if we typically get 30% off list price or not, but I know that's typical for Cisco gear. I would be surprised to find that the discount on 3Com gear is any more than that. If the discount is less, then the figure looks even *worse* for 3Com. -- Jeff McAdams Email: jeffm(a)iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 ------------------------------------------------------------------------ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

8 11

(usr-tc) Frozen NMCs
by mmm3＠cornell.edu 01 May '01

01 May '01

Folks... I'm having an oddball problem that, while not service-affecting, is nevertheless extremely annoying. Every once in a while, my HiPerNMCs will "freeze" up; They'll fall off the network and I can't even get them to respond via the console port. I have to physically pull the card and let it reboot to get it back. Has anyone seen this? Anyone have a clue/cure? Thanks... ********************************************************* Michelle M. Mogil Network & Computing Systems 735 Rhodes Hall, Cornell University, Ithaca, NY 14853 vox: (607) 255-0516, fax: (607) 255-8521 email: mmm3(a)cornell.edu ********************************************** - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) DUN 718 and 720 errors
by Charles Sprickman 30 Apr '01

30 Apr '01

Hi, Running ARC version 4.2.32. Uptime on all racks is 460 days, mix of DSP and quads... In the past two weeks, we've started getting tons of "718" and "720" DUN errors on windows users ("cannot establish a dial-up networking connection" and "unable to negotiate a compatible set of network protocols" respectively). Some mac users are getting similar results but rather than an error, authentication just times out. I see this on all chassis, and even on spans from different telcos. Additionally, when they get in, I'm seeing multiple start records, eg: | channel_connected_to | slot_connected_to | username | nasidentifier | framedipaddress | actual_time | acctstatustype | acctsessionid | +----------------------+-------------------+----------+---------------+ | 19 | 14 | xxxxx | x.x.x.5 | 216.223.197.116 | 2001-04-24 12:07:42 | Start | 219286853 | | 19 | 14 | mapple | x.x.x.5 | 216.223.197.116 | 2001-04-24 12:06:31 | Start | 219286853 | Same session ID, same IP address.... Any ideas? Is there any other more active forum for this equipment? Thanks, Charles | Charles Sprickman | Internet Channel | INCH System Administration Team | (212)243-5200 | spork(a)inch.com | access(a)inch.com - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 8