- USR-TC - mailman.xmission.com

(usr-tc) FS: Hiper Everything, 70A and 130A power
by ISP-NetworkHardware.com 25 Jul '01

25 Jul '01

WRCA.Net, Your Source for Total Control Refurbished hardware, has the following available: Hiper DSP's $1600 (T1) Hiper DSP's $3000 (E1) Hiper ARC's $1200 Hiper NMC's $900 EdgeServer Pro's $1100 70A power sets $300, $250ea for pair 130A power sets $500, $400ea for pair Hiper Bundles 70A power $5500.00 Hiper Bundles 130A Power $6200.00 Quad Modems available...all models Netserver PRI's Dual PRI's NMC's NMC v90 enabled Fan Trays Chassis's - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Ascend-IP-Direct / Policy Routing
by Brian Becker 24 Jul '01

24 Jul '01

Ryan, The instructions from 3Com are shown below, but seem to be very unspecific in a few places. The vague part is the VPN side...here's a situation. Remote-POP-TC-Box Remote-POP-Cisco Local-Router Local-Content-Filter-R2000 Normal User gets IP Routes to Local To the world Filter User Gets IP and needs to be pushed to the tunnel IP/IP Tunnel From ------------------------------->Tunnel Terminated 10.10.10.1/255.255.255.252 10.10.10.2/255.255.255.252 So what would I need to do to get this user to be pushed thru the tunnel? The tunnel is uni-directional. Right now, we have a special pool of Ips for filtered customers and on the Cisco we policy route those Ips thru the tunnel. I would love to be able to avoid setting up a pool of Ips just for filtered users. This sounds like a possible solution but I need some more info. Thanks, Brian 3Com Info...................... Configuring Host-based IEA Routing Follow these steps: 1 . Add an IP network on an Ethernet interface through which the VPN gateway can be reached: add ip network <name> address <ip_address> interface <interface_name> For example, to add an IP network called Lancer with an IP address of 200.0.0.2 to the eth:1 LAN interface: add ip network lancer address 200.0.0.2 interface eth:1 2 . Set the routing protocol for this network: set ip network <name> routing_protocol [none | ripv1 | ripv2 | ospf] For example, to set the routing protocol to RIPv2: set ip network lancer routing_protocol ripv2 3 . Configure RIP to send routing information, but to not listen for updates. Since RIPv1 and RIPv2 are configured to send routing information by default, you only need to configure the listening action: set ip network lancer rip_policies_update no_ripv1_receive set ip network lancer rip_policies_update no_ripv2_receive 4 . Configure a user either locally or in the RADIUS server that specifies the next hop gateway. Local configuration - Create a network user. Also, use the following command specify a next hop gateway: set network user <username> ip next_hop_gateway <ip address> RADIUS configuration - Configure a framed PPP user, also defining the VPN-Neighbor (or IEA-Next-Hop-Router) attribute. (This is USR Vendor Specific attribute which has an ID of 0x9008.The value of this attribute is an IP Address.) attribute to specify the next hop gateway. 5 . Enable IEA next hop routing using this command: enable ip iea_next_hop_routing 6 . Optional. If you want to force the router card to use only the configured next hop routing interface (causing the user connection to be dropped if the gateway is unreachable), use this command: enable ip iea_force_nexthop_routing Brian Becker President, Poplar Bluff Internet, Inc. P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114 Home of http://semo.net - Southeast Missouri's Online Community http://TotallyFabricated.com Total Scrutinizer - Tech Support Just Got Easier WebGabber - All-html Web Chat Software -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com] On Behalf Of Ryan Tucker Sent: Monday, July 23, 2001 7:42 PM To: usr-tc(a)lists.xmission.com Subject: Re: (usr-tc) Ascend-IP-Direct / Policy Routing Well, it turns out to be Ascend-Client-Gateway over here on our Max's... Ascend-IP-Direct didn't do it :-) But that's not your question... take a look at IEA-Next-Hop-Router. I think this will do what you need. -rt (standards -- so many to choose from) On Monday, July 23, 2001, at 01:47 , Carl Litt wrote: > > Does anyone know if the RADIUS attribute "Ascend-IP-Direct" is > supported by the HiPerARC? If so, what versions? Both Cisco and > Nortel CVX claim to support this VSA. > > From the definitions I've seen, Ascend-IP-Direct is used in an > Access-Accept > and tells the RAS to direct this user's packets to the provided gateway > IP. We would be using this to provide transparent content filtering > to select customers based on their RADIUS/LDAP entry. > > Otherwise, is there a way to do policy routing on the ARC via RADIUS? > I've looked at filters, but they don't seem to give the ability to > redirect, only accept or reject. (I am running ARC V4.2.32). > > Thanks, > Carl Litt > Network Administrator > Execulink Internet > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. For information > on digests or retrieving files and old messages send "help" to the > same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) FS: 3COM Hiper Access Bundle
by Brian Becker 24 Jul '01

24 Jul '01

We'll take it on our American Express Card Steve. Brian Becker President, Poplar Bluff Internet, Inc. P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114 Home of http://semo.net - Southeast Missouri's Online Community http://TotallyFabricated.com Total Scrutinizer - Tech Support Just Got Easier WebGabber - All-html Web Chat Software -----Original Message----- From: owner-usr-tc(a)lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com] On Behalf Of Steveslists Sent: Monday, July 23, 2001 8:25 PM To: usr-tc(a)lists.xmission.com Subject: (usr-tc) FS: 3COM Hiper Access Bundle For Sale 1. USR Total Control Hiper Access Bundle, Complete Rack 70 Amp Power Supply Hiper ARC NMC 2 Hiper DSP Cards All Documentation and cables, In original packaging. $5,500 - Buyer pays shipping and insurance Unit is 18 Months old and recently removed from service. Seller has exited the ISP business. Please send responses to: forsale(a)tcmetro.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) MP/16 Firmware
by Josh Miller 24 Jul '01

24 Jul '01

Does anyone have or know where I can get the firmware for the MP/16 V.34 modems? The product number is 80-000939-00 or 80-001133-00 (w/SNMP). I have a few modems with corrupt firmware and need to reload it, but it is no longer available (at least that I can find) on either USR's or 3Com's sites. Thanks... - Josh - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2

(usr-tc) FS: 3COM Hiper Access Bundle
by Steveslists 23 Jul '01

23 Jul '01

For Sale 1. USR Total Control Hiper Access Bundle, Complete Rack 70 Amp Power Supply Hiper ARC NMC 2 Hiper DSP Cards All Documentation and cables, In original packaging. $5,500 - Buyer pays shipping and insurance Unit is 18 Months old and recently removed from service. Seller has exited the ISP business. Please send responses to: forsale(a)tcmetro.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Ascend-IP-Direct / Policy Routing
by Carl Litt 23 Jul '01

23 Jul '01

Does anyone know if the RADIUS attribute "Ascend-IP-Direct" is supported by the HiPerARC? If so, what versions? Both Cisco and Nortel CVX claim to support this VSA. >From the definitions I've seen, Ascend-IP-Direct is used in an Access-Accept and tells the RAS to direct this user's packets to the provided gateway IP. We would be using this to provide transparent content filtering to select customers based on their RADIUS/LDAP entry. Otherwise, is there a way to do policy routing on the ARC via RADIUS? I've looked at filters, but they don't seem to give the ability to redirect, only accept or reject. (I am running ARC V4.2.32). Thanks, Carl Litt Network Administrator Execulink Internet - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) Dual PRI Question
by Brad Gass 23 Jul '01

23 Jul '01

Hello all. Although I'm getting most of the kinks worked out of my USR gear, I'm now working on the second chassis, which has a dual PRI card installed. The other chassis in this POP had a dual T1 card installed, and seems to be working just fine. However, I can't seem to see how/where to configure the dual PRI to function in channelized T1 mode. Unfortunately, I don't have access to PRI's with this telco. Reading the archives, I surmise this is possible to do, but may require a minimum firmware level. Is this correct, and if so, what version do I need? I believe I've got 3.0.2 in place now. Thanks again! Brad - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) New IBooks
by Wayne Barber 19 Jul '01

19 Jul '01

Hi, We've had two of the new Apple IBooks in here this past week and both had the same connection problems. They may connect but then drop shortly afterward or never authenticate. It looks like the PC-Tel problem. Is it possible Apple has switched to PC-Tel modems? I couldn't find anything on their website or in the discussion lists. Anyone have any further info? I'd also be interested to know if they are using the same modem chipset in the new G4s. Wayne Barber Coastal Telco Services - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Dumping ARC configuration
by Bob Purdon - Lists 19 Jul '01

19 Jul '01

Is there any way to dump the config out of an ARC? I know about TFTP'ing a bulkfile, but is there any way to get it in human readable form? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) FS: 3Com Edge Server PRO, Hiper DSP, Hiper ARC, ADSL Cellux
by ISP-NetworkHardware.com 19 Jul '01

19 Jul '01

WRCA.Net has the following 3Com Total Control Hardware available: Hiper DSP (nac/nic) sets $1800 Hiper DSP (nac/nic) sets in QTY of 10 or more $1650 each EdgeServer PRO with 2nics $1000 Hiper ARC 64MB $1200 ADSL Cellux OC3 MMF card set $900 Spare nics: Hiper DSP (nics only) $400 AXCell nics 69-002099-00 and 69-002024-00 $150ea WTB: WANT TO BUY!!!! 70A power supply sets 130A power supply sets HD Chassis w/ 70 or 130A power - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0