- USR-TC - mailman.xmission.com

Re: (usr-tc) Getting Ready for V.92
by Thomas_Goodman＠3com.com 14 Nov '01

14 Nov '01

John, Min Hardware for v92 HiPer DSPs HiPer ARC with 128MB RAM HiPer NMC http://www.commworks.com/Programs/v.92_Switchboard/ There are several trade in programs: http://www.commworks.com/Programs/Promotional_Offers/ Quad trade-in http://www.commworks.com/Programs/Promotional_Offers/TC1000_V.92_Readiness/ Competitive Trade In http://www.commworks.com/Programs/Promotional_Offers/TC1000_Competitive_Tra… NMC Card Trade In http://www.commworks.com/Programs/Promotional_Offers/TC1000_v.92_upgradepac… Check them out and call your reseller. John Scrivner <john(a)scrivner.com>@lists.xmission.com on 11/12/2001 01:18:50 PM Please respond to usr-tc(a)lists.xmission.com Sent by: owner-usr-tc(a)lists.xmission.com To: USR List <usr-tc(a)lists.xmission.com> cc: Subject: (usr-tc) Getting Ready for V.92 Could someone please list the minimum equipment needed in a chassis to perform V.92? I have been hearing lately that I will have to replace my management card? I know that quads are not supported so those are now junk. I have a number of Hiper's and I hear they will work. Also, are there any trade in programs that give a decent value for upgrading? I am certainly not looking forward to spending a bunch more on the soft dialup business. Cable has been selling 256k here for 29.95 per month with no setup fee and a free cable modem. No long term commitment needed. I HATE THOSE GUYS !! Any help is appreciated. Scriv - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

10 14

(usr-tc) Getting Ready for V.92
by John Scrivner 12 Nov '01

12 Nov '01

Could someone please list the minimum equipment needed in a chassis to perform V.92? I have been hearing lately that I will have to replace my management card? I know that quads are not supported so those are now junk. I have a number of Hiper's and I hear they will work. Also, are there any trade in programs that give a decent value for upgrading? I am certainly not looking forward to spending a bunch more on the soft dialup business. Cable has been selling 256k here for 29.95 per month with no setup fee and a free cable modem. No long term commitment needed. I HATE THOSE GUYS !! Any help is appreciated. Scriv - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) What My Soultion
by Craig 12 Nov '01

12 Nov '01

Hello usr-tc, Hello I have a project that I need so guru advice. I want to beable to have 1000-2000 user upgradable to 10k, I will have a fiber line from the telephone company then i will be transmitting voip for IP telephones.... What equipment is availible for this appilcation beside pay the outragous price's 3com is asking for equipment...and no exsisting support! -- Thanks, Craig mailto:Craig@tavrida.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Lost NMC Stop accounting
by Nicanor Pulido 08 Nov '01

08 Nov '01

Hi, anybody does/did experience this annoying accounting error? About 10% of our total calls have ARC Start, NMC Start, ARC Stop accounting packets and no NMC Stop packet. Percentage seems to increase with the number of calls. Scenario: 3COM TotalControl 1000 with SteelBelted Radius, radius does not matter since the NMC does not send the Stop packet. Any idea is welcome, thanks in advance. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) MP/16 Firmware
by Omniflux 06 Nov '01

06 Nov '01

Does anyone have or know where I can get the firmware to reflash the modems in the MP/16 V.34 modem pools? I have a number that have gone bad... I've asked once before but received no affirmative responses, so try try again :) - Omniflux - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2

(usr-tc) hiperarc + freeradius woes
by jason 31 Oct '01

31 Oct '01

I'm not sure how active this list still is but here goes :: I'm having a strange problem with getting Framed-IP-Address to work with a HiperArc Total Control Unit. It seems that even though the Framed-IP-Address is set, it won't respect that and assigns a dynamic, when my freeradius server is in action. It works however when talking to the old Cistron server. The othe thing is that my good ole portmaster 2 works fine with either.. These hiperarcs seem to be finicky beasts and I imagine that either I'd not seeing something it wants or there is some configureation setting that we're not aware of that needs to be tweaked Here's a copy of what I recieve when I do a radtest to either server.. localhost is the freeradius and svr4 is the cistron. bash-2.05# ./radtest username(a)domain.net password localhost 5 testing123 Sending Access-Request of id 57 to 127.0.0.1:1645 User-Name = "username(a)domain.net" Password = "2\006\n\323\316\371G\3334`*\315\033\020I\010\355" NAS-IP-Address = radius1.egix.net NAS-Port-Id = "5" rad_recv: Access-Accept packet from host 127.0.0.1:1645, id=57, length=68 Service-Type = Framed-User Framed-Protocol = PPP Framed-MTU = 1500 Framed-Routing = None Framed-Compression = Van-Jacobson-TCP-IP Framed-IP-Address = 209.131.199.209 Framed-IP-Netmask = 255.255.255.255 Idle-Timeout = 0 bash-2.05# ./radtest username(a)domain.net password svr4.iei.net 5 testing123 Sending Access-Request of id 61 to 209.131.216.202:1645 User-Name = "username(a)domain.net" Password = "\241`s\307r\330rQQ\2244x\233\314\344\367\334" NAS-IP-Address = radius1.egix.net NAS-Port-Id = "5" rad_recv: Access-Accept packet from host 209.131.216.202:1645, id=61, length=68 Service-Type = Framed-User Framed-Protocol = PPP Framed-MTU = 1500 Framed-Routing = None Framed-Compression = Van-Jacobson-TCP-IP Framed-IP-Address = 209.131.199.209 Framed-IP-Netmask = 255.255.255.255 Idle-Timeout = 300 Any help or insight would be greatly appreciated. -jason - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 4

(usr-tc) Re: Harc code 30
by Dayton Internet 31 Oct '01

31 Oct '01

Sorry, I didnt change the subject on the previous email. ----------------------------- Has anyone found the definition of what causes the "30" disconnect reason supplied by the HyperArc from time to time? Or does anyones other radius have that defined in their dictionary? oct01:10/30/2001 17:23:08 ktaylor 204 TS4 261 66 13413 120663 User-Request "xxxxxxxxxx" oct01:10/30/2001 20:18:29 ktaylor 1498 TS4 275 121 144930 268281 User-Request "xxxxxxxxxx" oct01:10/31/2001 00:28:18 ktaylor 16 TS4 19 150 417 407 30 "xxxxxxxxxxx" ^^ || -- --Rich Adams, President-Dayton Internet Services, Dayton, Ohio-- --w8mfd(a)dayton.net--www.dayton.net--www.dayton.com--937-586-2500-- - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) WTB: USR MP16v34
by ISP-NetworkHardware.com 31 Oct '01

31 Oct '01

Anybody sitting on qty? I'll buy small packages but would love to find 10 at a shot. Please email me what you have available. MP16 v34 must be guaranteed working, I'll pay freight in. Also buy Cisco, Livingston, Ascend, Adtran, Kentrox to name a few. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 2

(usr-tc) v90 firmware
by Scott Kupferschmidt 26 Oct '01

26 Oct '01

Hey guys. I need some help. I don't have a support contract with USR, but this is what I've got here. We have 2 USR Total Controls with 48 modems in each. The newer hardware of the two has older firmware for the modems not supporting V.90, but the SMC card has the feature code in it to support V.90. The older hardware has the V.90 firmware on the modems (so we swapped them from each chassis) and we're working on partial V.90. However, we'd like to get both of them all up to V.90 so we can utilize all of our ports once again. We have 1 PRI that is turned off because we cannot support it and we're having some config problems. I guess what I'm getting at here is.. I need to know where to get the firmware. Whether someone can email me it, or point me in the right direction on getting it -- that would be great. We are getting a lot of angry customers because of busy signals that we shouldnt be getting had we had the other TC up online accepting calls. Please help? Scott - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 5

Re: (usr-tc) What memory does the HiperARC use?
by Mike Greene 26 Oct '01

26 Oct '01

At 02:14 PM 10/16/01 -0400, you wrote: >Hi, >Does anyone know the specs on HiperARC memory? >I know it is EDO, but: >Parity or Non-Parity ? >Gold Lead or Tin Lead ? >5 volt ? 128MB EDO 168pin BUFFERED 3.3v Mine was tin lead, don't remember about parity though. - Mike ------------------------------------------------ Rock Island Communications, Inc. (360)-378-5884 http://www.rockisland.com/ San Juan Islands, WA ------------------------------------------------ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1