- USR-TC - mailman.xmission.com

TC <--> ISDN Ascend Pipeline config/Problems
by Verreault, John 05 Dec '01

05 Dec '01

We have recently acquired an ISP that had many ISDN customers using Pipeline 50's and 75's We are noticing that after a while (12-hours to a days) we start to notice significant packet losses across the ISDN link. Rebooting the Ascend immediately takes care of the problem but the cycle continues after a while again. Before the Pipelines were connecting to a MAX4048 without any problems Are there any special configs needed on the TC or Ascend to work together? We are running DSP 2.1.85 and HiperArc 5.1.99 I have disabled compression on digital calls and changed the ascends from MPP to MP Radius user file snippet coachxxx Password = "xxx" User-Service = Framed-User, Framed-Protocol = PPP, Framed-Routing = None, Framed-Netmask = 255.255.255.248, Framed-Address = 216.221.55.57, Framed-MTU = 1500 Any suggestions greatly appreciated. Thanks John Verreault AEI 514/284-4452 x 707

1 0

unnumbered PPP connections.
by Sergio Gonzalez 05 Dec '01

05 Dec '01

*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello there. I was wondering someone in the list can help me with a little thing. I need to route a subnet A.B.C.D/24 via dial-up (ISDN) in a Hiper ARC. Actually the user that has in his LAN the A.B.C.D/24 network is dialing into the RAS and get connected with a dynamic IP address W.X.Y.Z/32 from the pools already working in the Hiper ARC. I need the packets coming from A.B.C.D/24 network go throught the PPP connection made to the RAS. How can I do this? Thanks a lot. Sergio Alejandro Gonzalez Director Operativo SkyNet de Colombia. Bogota, Colombia, South America. 57 (+1) 6 422 020 57 (+3) 7 285 094

2 1

MRTG Sript for Modem utilization.
by Timothy C. Bohen 30 Nov '01

30 Nov '01

Does anyone have an MRTG script to track modem utilization on the Arc's? Thanks Timothy C. Bohen CMSInter.Net / Crystal MicroSystems =================================== web : www.cmsinter.net email : Tim(a)CMSInter.Net phone : 989.235.5100 x222

6 11

WTB: Cables - Total Control
by Steve Rivera -www.wrca.net 30 Nov '01

30 Nov '01

I am interested in any USR cables you have available. The mini scsi to 4 port rs232 or mini scsi to rj46 cables. Send me your list. http://www.wrca.net Worldwide Provider of Network Hardware since 1981 Steve Rivera 732-833-2111 x102 732-433-5890 Cell

1 0

FS: USR / 3Com Hiper DSP, ARC, NMC, 130A power sets
by Steve Rivera -www.wrca.net 29 Nov '01

29 Nov '01

WRCA.Net has the following USR in stock, ready to ship. Partial listing of USR inventory. Parts available. Hiper DSP $1200 Hiper ARC $1600 128MB Hiper ARC NAC Only $800 Hiper NMC NAC Only $800 NMC v90 $600 130A power sets $475 70A power set $225 Hiper Bundles: 130A Bundle (Blue Label chassis), nmc, hiper arc, 2x hiper dsp $4500 70A bundle, nmc, hiper arc, 2x hiper dsp $4000 Quad Bundles 45A Bundle, nmc, netserver pri, 12x quad digital modem, dual pri $850 70a Bundle, nmc v90, netserver pri, 12x quad analog/digital modem, dual pri $1500 http://www.wrca.net Worldwide Provider of Network Hardware since 1981 Steve Rivera 732-833-2111 x102 732-433-5890 Cell

3 2

Warranty period/time
by Paul Farber 27 Nov '01

27 Nov '01

Hello I have a 2.5 year old (got it in 3/99) TC Chassis that has a bad 70A PS (the light is red DOH!) Since thier web site contains no usefull information on the warranty period that I could find (URL?) what was the standard for regular repair? I thought it was 5 year.... close? Thanks -- Paul Farber Farber Technology farber(a)admin.f-tech.net Ph 570-628-5303 Fax 570-628-5545

2 1

HiperDSP v3.1.7 Reboots (anyone else?)
by Marshall Morgan 24 Nov '01

24 Nov '01

We are getting reports from our internal monitoring system saying cards are rebooting (less than 96, 15 minute intervals in the following mib after 24 hours). We haven't double checked it with online logs yet, but I believe they are correct. Anyone else getting these? (cards 1025, 4025, 5025 rebooted based on the SNMP results): transmission.18.6.1.4.1025 = 63 transmission.18.6.1.4.2025 = 96 transmission.18.6.1.4.3025 = 96 transmission.18.6.1.4.4025 = 51 transmission.18.6.1.4.5025 = 53 transmission.18.6.1.4.6025 = 96 transmission.18.6.1.4.7025 = 96 transmission.18.6.1.4.8025 = 96 transmission.18.6.1.4.9025 = 96 NOTE: For the record: Cards were flashed no more than 6 at a time via a HiperNMC (v8.2.7) and TCM 8.2.6, restored defaults on template 1, saved template to NVRAM, restore from NVRAM, refreshed channels, same T1/E1 and modems to NVRAM and then rebooted again. Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838

1 0

MRTG Question
by Giovanni Navarrette 23 Nov '01

23 Nov '01

Hey everyone :: I had a question. I have got the script from Green Apple Network for getting single dsp stats. Anyone have a modification to this script that will make it do 2 cards, or 3? I wanna poll 3 cards and get stats for just 3 cards, but the script only does 1. I'll try to figure it out too, but if someone knows how to do this, can ya help? If I find the answer, I'll post it here too. Thanks for any help. Have a nice weekend. -------------------------------------------- Giovanni Navarrette USLink Internet Systems Administrator Hours :: 8.00AM - 4.30PM :: Mon - Fri Email :: gio(a)uslink.net Phone :: (800)-450-4000 :: Ext.2003

1 0

TAPI_OPEN message sent failed
by Marcelo Souza 23 Nov '01

23 Nov '01

Hi, Does anyone can tell me what this message mean? Nov 23 14:30:40 du-gw At 16:27:33, Facility "GWC Modem Driver", Level "CRITICAL":: GWCMDM_AL, slot:9/mod:16 TAPI_OPEN message sent failed, Major Goofup - Marcelo

1 0

To The 3com or Who ever is Lurking for Mr Goodman
by Craig 21 Nov '01

21 Nov '01

Hello usr-tc, To the list I apologize to 3com I don't!! I am not in the position as many on this list with ten's of thousand ports. I just on of those small guys with 3 or 4 chassis laying around trying to make a dollar. And buying what those other guys sell off. But I need support sometimes too. But paying thousand of dollars for support is my profit line and there are thousand's and thousand's of us out there that you at 3com don't care a s**t about! Before I was strictly in the Isp service I was in asset recovery business and still dapple in it. As I am in a third world country now trying to build up an ISP business...I still see everyday 100,000 dollars of your equipment sold to guys like me around the world..that translate into if you can't count 36 million dollars in used TC equipment a year...WITH PEOPLE NEEDING SUPPORT!! To say it cost money is an argument full of hog wash! There is more than enough people out here to pay those people for support ( I don't mean thousands of dollars support contracts but plain old fashion support!) and to make profit on it. So to me and many others it comes down to 3com just doesn't want to support there equipment!!!! If you don't want to support people like us (Your future core). And only support the guys that can pay enough to **** 3com's behind..then why don't you sell off your quads and other EOLed equipment/software to a company that making a extra 30 million a year is important.... Not only you are losing a fortune by not supporting these people! Your losing hundred of million when these people like me upgraded... I won't think about buying from you guys now! I will probably upgrade with Lucent or Patton. Oh by the way my next upgrade will be to 2000 VOIP Ports with expandability to 10k and the reason I won't be buying from you guys is Comments like "People cost Money" Well MR Goodman I'm going to be spending my Hard Earned Money and the banks, I want to speak to people and be assured that what I'm about to buy will not be EOLed in a year because 3com doesn't want to support it!! If you at Comworks are listening to some pencil pushing geek about profitability you better get some one else,that knows what going on out here in the real world with your used equipment and where your future buyers are ....Not someone that's analyzing some stock options and profit beta's!! I apologize to the list but it rely erks me when a company buys out a company with good support and products USR and drives there good name to the ground...Like Compaq did to DEC!! -- Thanks, Craig mailto:Craig@tavrida.net

1 0