- USR-TC - mailman.xmission.com

WTB: USR/3Com TC1000 DC 130A power sets
by Steve Rivera - WRCA.Net 03 Aug '05

03 Aug '05

Have immediate need for 6. Power Supplies for Total Control 1000 10- 130A DC PSU and PSI DC power set Steve Rivera -WR Consultant Associates, Inc. T: 732-833-2111 x102 IM: srivera711 www.wrca.net End-to-End WAN Solutions Since 1981... "Selection Sets Us Apart"

1 0

RE: [USR-TC] Hiper DSP
by Adam Barnhill 02 Aug '05

02 Aug '05

Check your Timeslots for Local/Remote Out of Service messages. It may also be that two timeslots are mapped [Timeslot Mapping and Blocking] to one Modem or something of that nature. -----Original Message----- From: usr-tc-bounces+adam=semo.net(a)mailman.xmission.com [mailto:usr-tc-bounces+adam=semo.net@mailman.xmission.com] On Behalf Of Shahrooz Sharghi Sent: Tuesday, July 26, 2005 12:26 PM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: [USR-TC] Hiper DSP Hi all We have a tc1000 with this configuration: 1- NMC Card 2- Hiper Access router card 3- 1 E1 DSP ISDN Signaling Max users could connect to it are 29, never we don't have 30 online user together. After 29 online user they get Busy Tone. What do you think about this problem? Regards Shahrooz Sharghi

4 6

VOIP
by Lewis Bergman 29 Jul '05

29 Jul '05

What does it take to enable the TC1000 to handle VOIP? -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 325-691-3301 800-299-6962

1 0

Hiper DSP
by Shahrooz Sharghi 26 Jul '05

26 Jul '05

Hi all We have a tc1000 with this configuration: 1- NMC Card 2- Hiper Access router card 3- 1 E1 DSP ISDN Signaling Max users could connect to it are 29, never we don't have 30 online user together. After 29 online user they get Busy Tone. What do you think about this problem? Regards Shahrooz Sharghi

1 0

RE: Dial-In Problem!!!!
by Kirti S. Bajwa 26 Jul '05

26 Jul '05

Hello: Please help. This problem is going on for the last 7 weeks without fixing. TC1000 1-HiPer NMC 2-HiPerARC 10-Hiper DSP We are a small ISP (400 customers). We have 2-ISDN-PRI lines for our customers to dial in. Our entire system looks like this: / / T1 to Internet Backbone / CISCO 26XX Router | HUB 10/100 | ---------------------------------------------------------------------------- ----------------------------- | | | | | | NMC ARC1 ARC2 Web Authentication Internal Network ----------- 3Com ------------ Server email Server | | | | | | | | | | | | Customer Dial-In Our customers can dial-in, are authenticated and can access the internal web site (www.tibonline.net <http://www.tibonline.net/> ) and retrieve their email. But when they try to connect to any web site (outside our network) on the external net (such as www.yahoo.com <http://www.yahoo.com/> ), they time out with a message saying that "this page can't be displayed". We have changed the HUBs, RJ45 cables. We have the CISCO Router tested fine. Finally, I replaced the 3COM box with a backup box and the problem continues. Interestingly, we can access any Internet web site (www.msn.com <http://www.msn.com/> , www.yahoo.com <http://www.yahoo.com/> , etc.) from our internal network (over LAN) without problem. I have called Sprint, who provides us with ISDN-PRI lines. They claim that the lines are testing OK. Has anyone faced the similar problem? If YES, what was the solution? Kirti

7 18

Saving serttings problem!!
by Kirti S. Bajwa 25 Jul '05

25 Jul '05

Hello: System: TC1000 1-HiPer NMC 2-HiPerARC 10-Hiper DSP Problem: I am trying to setup this 3COM chassis. I open the Total Control Manager & select all DSP cards. Then I make the changes. Then: Software > Save Both T1/E1 and Modem to NVRAM > Execute Software > Software Reset > Execute Configure > Action/Commands This portion of the DSP settings and saving is success. Then I try to save the Chassis, as follows: Select NMC Card. Configure > Action/Commands Software > Save Chassis to NVRAM > Execute NOW THE PROBLEM. Sometimes there is "Success" and other times the result code "InProgress" stays on for ever. What is the problem? Is there any other way to save the DSP settings? I am working on this problem for 2-weeks and any HELP is highly appreciated>. Thanks, Thanks & many many thanks for a quick response. Kirti

2 1

FS: Chassis, analog parts, misc.
by Charles Sprickman 20 Jul '05

20 Jul '05

Hello all, I posted some of this stuff a few weeks ago, but decided to go the EBay route since I'm not sure what it's worth. We have two auctions running, one for two chassis, one for a bunch of misc. parts, including the hard-to-find analog NICs and quad-cables. We recently went with outsourced dialup (yeah, it's hard to give up control, er... Total Control, yuck yuck yuck) so we don't need this stuff. We're also moving to new offices, so it's time to ditch things we don't use. As noted in the parts auction, I'll probably find more oddball stuff as we pack, so the winner there can choose to take whatever else I find if interested. Here's the two auctions: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=5791216228&ssPageNa… http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=5791221070&ssPageNa… Apologies if this offends... Feel free to contact me directly at this email address with any questions. Obviously if you're local you are more than welcome to visit us to pick this stuff up. Thanks, Charles ___ Charles Sprickman NetEng/SysAdmin Bway.net - New York's Best Internet - www.bway.net spork(a)bway.net - 212.655.9344

1 0

Realms
by Lewis Bergman 14 Jul '05

14 Jul '05

Does anyone know if I can set a TC to add a realm to a username before it sends the request to the RADIUS server? We are doing some consolidation and are trying to avoid problems with duplicate user names. -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 325-691-3301 800-299-6962

3 2

4- Hiper Bundles to Blow Out.
by Steve Rivera - WRCA.Net 12 Jul '05

12 Jul '05

Just got in more than I need at this point. TC1000 with dual 70A 1x Hiper NMC 2x Hiper ARC 14x Hiper DSP $395ea I'll guarantee it for 30 days. Steve Rivera -WR Consultant Associates, Inc. T: 732-833-2111 x102 IM: srivera711 www.wrca.net End-to-End WAN Solutions Since 1981... "Selection Sets Us Apart"

1 0

Hiper NMC's for sale
by Russell Newberry 11 Jul '05

11 Jul '05

Hi all, I have Qty 12 Hiper NMC NIC/NAC sets available at $175 per set. Will consider QTY discount. Just give me a shout. Thanks! ========================= Russell Newberry Maxis Technologies, Inc 433 West Wilshire Blvd. Oklahoma City, OK 73116 AOL IM "RUSSELLatMAXIS" e-mail: russell(a)maxistech.net Phone: 1 (800) 79 MAXIS International: 1 (405) 842-3331 Fax: 1 (405) 841-7882 http://www.maxistech.net

1 0