- USR-TC - mailman.xmission.com

Anyone familiar with Balance and Un-Balanced E1/PRI
by Stephen Rivera - WRCA.Net 02 Jul '02

02 Jul '02

Customer is asking....(in regards to Dual E1/PRI) Can you please explain to me whether these should be balanced or unbalanced? I'm asking..Is this dictated by Telco? If so, does the card have the ability to change via software setting or board jumper? Does it even matter to the card set? Steve Rivera IM: srivera711 Toll Free: (877)WRCANET x102 DIRECT: 732-833-2034 Fax available equipment to: (732)833-2115 for more product info got www.wrca.net

3 3

Anyone need some DSP cards??
by WayneG 01 Jul '02

01 Jul '02

We have some more HiPer DSP cards that we've taken off line and would like to sell. We have 20 card sets available. I have freshly loaded v.4.3 firmware on each card and reset to factory defaults. These didn't sell at $800 last time I posted them here, so please make me an offer. Thank you, -Wayne. Wayne Griswold Network Administrator U.P.Log-On Internet Computer Connection U.P. 500 N. Stephenson Ave Iron Mountain, MI 49801 (906) 774-4847 (906) 774-0335 (fax) SysAdmin(a)uplogon.com

2 1

Re: [USR-TC] Anyone need some DSP cards??
by Mike Greene 01 Jul '02

01 Jul '02

Sorry list, that was supposed to be private! - Mike ------------------------------------------------ Rock Island Communications, Inc. (360)-378-5884 http://www.rockisland.com/ San Juan Islands, WA ------------------------------------------------

1 0

T1 or E1 DSP
by WayneG 01 Jul '02

01 Jul '02

How do you tell if a HiPer DSP is a 30 modem E1 ? Can the E1 DSP's be used in the US with a 24 channel PRI? -Wayne

2 1

Re: [USR-TC] T1 alarm traps problem
by Mike Greene 01 Jul '02

01 Jul '02

At 01:31 PM 6/28/2002 -0600, you wrote: >Hi all, > > I am having a problem getting my traps on a Hyper DSP card to save >through a hardware reset. After setting up the traps I go to commands on >the NMC and the DSP card and save to NVRAM, but the card still manages to >reset itself on reboot. Any ideas? Am I saving in teh right place? Highlight the DSP card, then go to commands|software|save T1 & Modems to NVRAM that will commit the changes to the DSP card. - Mike ------------------------------------------------ Rock Island Communications, Inc. (360)-378-5884 http://www.rockisland.com/ San Juan Islands, WA ------------------------------------------------

3 4

T1 alarm traps problem
by Peter Galbraith 28 Jun '02

28 Jun '02

Hi all, I am having a problem getting my traps on a Hyper DSP card to save through a hardware reset. After setting up the traps I go to commands on the NMC and the DSP card and save to NVRAM, but the card still manages to reset itself on reboot. Any ideas? Am I saving in teh right place? Thanks, --Peter Galraith

1 0

HARC syslogs
by MacDonald, James 28 Jun '02

28 Jun '02

Anyone out there parsing HARC syslogs for errors and problems? We are getting intermittent disconnects and reboots and need a way of determining if we can detect the problems via syslog analysis. I'm just looking for a list of errors and messages to look for. Thanks James MacDonald, CCNP Senior Platform Manager, IP Network Operations AT&T Canada Corp. 370 King St W., 6th Floor Toronto, ON M5V1J9 Ph: 416-204-5793 Fx: 416-204-5744 Emergency: 416-204-5700 (NMC Hotline) Email: james.macdonald(a)attcanada.com

5 4

RE: [USR-TC] TC1000 Training Class at 3Com - Lunch on me :)
by Brian Becker 27 Jun '02

27 Jun '02

Hey Steve, Items we'd be interested in sending someone to learn: OSPF Using TC box with MPPP to nail up a connection as a backup if main connection/route dies MPIP (I think that's the protocol) Troubleshooting the Telco's T1 or PRI Filters Thanks, Brian Brian Becker President, Poplar Bluff Internet, Inc. http://semo.net P.O. Box 190 | Poplar Bluff, MO 63902 | 573.686.9114 -----Original Message----- From: usr-tc-admin(a)mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com] On Behalf Of Stephen Rivera - WRCA.Net Sent: Thursday, June 27, 2002 6:48 PM To: usr-tc(a)lists.xmission.com Subject: [USR-TC] TC1000 Training Class at 3Com - Lunch on me :) I have been working with Thomas Goodman @ 3Com regarding these training classes, he was able to get this class schedule. THANKS TOM!. 3Com has the following classes schedule for next month... If interested you can contact Lyse Belcina @ 3com 847-262-2900 I will be attending both of these for my first level VAR certification for NEW hardware sales. If you are in the area or going to the class let me know, We'll do lunch :) On me. -Total Control Installation, Configuration and Management class scheduled for 7/22/02-7/24/02 (9-5pm) Rolling Meadows, IL -Hiper ARC Installation & Configuration class scheduled for 7/25/02-7/26/02 (9-5pm) Rolling Meadows, IL For those of you who contacted me regarding advance feature training Tom is looking into it. If you have specific things you are interested in let me know so I can present them as a class criteria requirement. PS....Anyone looking for information regarding : service contracts for v92 upgrade? trade in programs to upgrade v92? multispan cards (96 port) DS3 ingres card VPN Gateway bundle and the usual stuff. Let me know if I can help you out. Steve Rivera IM: srivera711 Toll Free: (877)WRCANET x102 DIRECT: 732-833-2034 Fax available equipment to: (732)833-2115 for more product info got www.wrca.net _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

TC1000 Training Class at 3Com - Lunch on me :)
by Stephen Rivera - WRCA.Net 27 Jun '02

27 Jun '02

I have been working with Thomas Goodman @ 3Com regarding these training classes, he was able to get this class schedule. THANKS TOM!. 3Com has the following classes schedule for next month... If interested you can contact Lyse Belcina @ 3com 847-262-2900 I will be attending both of these for my first level VAR certification for NEW hardware sales. If you are in the area or going to the class let me know, We'll do lunch :) On me. -Total Control Installation, Configuration and Management class scheduled for 7/22/02-7/24/02 (9-5pm) Rolling Meadows, IL -Hiper ARC Installation & Configuration class scheduled for 7/25/02-7/26/02 (9-5pm) Rolling Meadows, IL For those of you who contacted me regarding advance feature training Tom is looking into it. If you have specific things you are interested in let me know so I can present them as a class criteria requirement. PS....Anyone looking for information regarding : service contracts for v92 upgrade? trade in programs to upgrade v92? multispan cards (96 port) DS3 ingres card VPN Gateway bundle and the usual stuff. Let me know if I can help you out. Steve Rivera IM: srivera711 Toll Free: (877)WRCANET x102 DIRECT: 732-833-2034 Fax available equipment to: (732)833-2115 for more product info got www.wrca.net

1 0

Can someone tell me the TCM version or software version for v92 compatible code
by Stephen Rivera - WRCA.Net 26 Jun '02

26 Jun '02

Customer looking to verify that they have the right code installed. I am not sure when the v92 compatible revisions started Please advise if you can... Hiper DSP Hiper ARC Hiper NMC Thanks in advance.... By the way... oodles of Hiper ARC's and Hiper DSP's available, couple hiper nmc's Steve Rivera IM: srivera711 Toll Free: (877)WRCANET x102 DIRECT: 732-833-2034 Fax available equipment to: (732)833-2115 for more product info got www.wrca.net

8 10