- USR-TC - mailman.xmission.com

WTS: Hiper DSP Bundles $5500.00 each
by sky1 20 Nov '02

20 Nov '02

Still have several of the 3Com Total Control Hiper DSP bundles configured as follows: (14) Hiper DSP V.90 (2) Hiper ARC 128Mb version (1) Hiper NMC (1) Newer Blue labeled chassis w/ Dual 130 Amp AC power $5500.00 each will work on price on quantity orders. Also have tons of other total control parts.....if you need anything, send me an e-mail and I'll give you pricing. Thanks for your time, Shannan Young SouthWest Data Technology, Inc. 972-739-7010 972-739-7013 (Fax) sky1(a)airmail.net www.swdt.com

1 0

Re: [USR-TC] TCS 4.7 Released
by Thomas_Goodman＠3com.com 20 Nov '02

20 Nov '02

Yes "WayneG" <WayneG(a)uplogon.com>@mailman.xmission.com on 11/14/2002 12:13:27 PM Please respond to usr-tc(a)mailman.xmission.com Sent by: usr-tc-admin(a)mailman.xmission.com To: <usr-tc(a)mailman.xmission.com> cc: Subject: Re: [USR-TC] TCS 4.7 Released Is CEM required for 4.7? ----- Original Message ----- From: <Thomas_Goodman(a)3com.com> To: <usr-tc(a)mailman.xmission.com> Sent: Wednesday, November 13, 2002 12:53 PM Subject: [USR-TC] TCS 4.7 Released > > TCS 4.7 is now available on http://totalservice.commworks.com. This system release includes the following software code for the TC1000 EDS / RAS > platform:: > > HiPer DSP T1/PRI 3.7.4 > HiPer DSP E1/R2 3.7.4 > HiPer DSP E1/PRI 3.7.4 > DSP Multispan T1/PRI 3.7.4 > DSP Multispan E1/PRI 3.7.4 > DSP Multispan E1/R2 3.7.4 > HiPer NMC 10.1.5 > NMC 333 10.2.5 > Common Element Manager 1.1.8.525 > HiPer ARC / ARC 5.7.2 > > New HiPer ARC / ARC features include: > > Density enhancement to support 48 T1 / 36 E1 spans via 12 DSP Multispan > cards > Dynamically configure and assign IP pools from RADIUS > PPPoE negotiation over L2TP as per RFC 2516 > Modification to L2TP tunnel switching RADIUS attributes > PPP Echo Request as per RFC 1661 > Microsoft PPTP enhancement > Improved "save all" performance > Tunnel switching of L2TP dial out > > New DSP features include: > > Compatibility with SS7 SLAP version 3.0 > Improved V.92 support for GSTN cleardowns, retrains and speed shifts > PCM Upstream support up to 36000 > Support for PIAFs originate mode > > New Features for HiPer NMC include: > > User definable console port > Management support for PIAFS originate > > New Features for NMC 333 include: > > User definable console port > Management support for PIAFS originate > Telnet access > Supernetting > Compact Flash file system > SNMP V3 > > New Features for Common Element Manager include: > > Find function > ARC Backup > Added Cost Feature display > Enhanced SDL > Background MIB table loading > Simplified DS1 signaling change-over for DSP cards > > Further details / changes are available in the posted System Release Note > in PDF format. Please note, no other documentation is available. > > Requirements for (CEM) Common Element Manager see System Release Notes > > The software matrix and the news update section on-line will be updated > shortly to reflect the new system release. > > > > > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

17 22

Can some anwser something about dsl
by David Seckinger 19 Nov '02

19 Nov '02

ADSL - Asymmetric DSL the ISP can send you lots of data, but you can't send them much. SDSL - Symmetric DSL the ISP and you send at the same data rate IDSL - IDSN DSL you ISP and you have a pipeline of 144kps (uses ISDN transmission coding) hope this helps. The "A" stands for "Asymmetric", meaning the phone company can send lots of data to you, but you can't send much to them. Originally, only a tiny uplink of 16 or 64kbps was supported; recent flavors of ADSL support up to ten times that much.

2 1

Problem with traffic account on NetServer/8 using with RADIUS
by Stanislav Zaytsev 19 Nov '02

19 Nov '02

Please, help to fix problem: When NetServer sends account information to RADIUS it does not provide RADIUS with traffic information. Does it supports this? Maybe I incorrectly maintain it? Thanks beforehand. Stanislav.

1 0

faxing with hiper dsp
by David Seckinger 19 Nov '02

19 Nov '02

I am trying to set up an outbound fax system using hiper dsp's. The AT fax command AT+FCLASS=? which tells you what fax services the modem will work with gives me an error. Does anyone have any ideas? thanks in advance, dave.

1 0

Setting up Netserver 16 I-modem
by Shahin Sharghi 18 Nov '02

18 Nov '02

Hi all, I have got a Netserver 16 I-modem. for setting it up I connected ISDN line to it (2 wires isdn line from telco connected to middle pins of RJ-45) and set "imodem interface" according to it's manuals. The modem lights on the box always blink amber, I dont know where is the problem. I tried setting different ISDN switch types but nothing changed. Can anyone give me a help to solve the problem? Thanks Shahin

1 0

WTS: Total Control Hiper Chassis fully populated
by sky1 18 Nov '02

18 Nov '02

I have (10) 3Com total control Hiper chassis fully populated. Configured as follows: (14) Hiper DSP V.90 (2) Hiper ARC (128Mb version) (1) Hiper NMC (2) 130 Amp AC power (1) 3Com chassis w/ fan assembly Looking for $5500.00 each OBO All units refurbished an in excellent condition...90 day warranty! If interested, contact: Shannan Young SouthWest Data Technology, Inc. 972-739-7010 972-739-7013 (Fax) sky1(a)airmail.net www.swdt.com

1 0

hi...
by Dragan Zubac 18 Nov '02

18 Nov '02

I have TC chassis with 15 Quad modems,Dual PRI NAC,Netserver PRI card and NMC card,but when I turn on the chassis,on all cards RN/FL is green but on NMC card RN/FL led is red all the time and also hub status led is red all the time :( I assume there might be some bus problem on the chassis itself or beetwen NMC and the chassis itself ? When I connect serial cable in the first rs-232 port on the back side of NMC card (NIC part) I can see no data ? I configured the dip switch to 9600. Anyone could point me how can I debug the situation ? Sincerely, Dragan Zubac

1 0

hub fan
by Kancha . 15 Nov '02

15 Nov '02

Hi All: My TC hub currently has 2 cards only and the remaining slots are free. As the power consumption of the hub is high i was told that the fans of unused slots can be turned off. How can this be done ? Is it software controlled or do i have to turn it off manually ?? __________________________________________________ Do you Yahoo!? Yahoo! Web Hosting - Let the expert host your site http://webhosting.yahoo.com

1 0

B Channel
by Travis M. Best 15 Nov '02

15 Nov '02

How do i set the B Channel For A Modem On A Quad 4 Card I Am Using The Total Control Manager Software Any Help Would Greatly Be Apreaciated Thanks, Travis

1 0