- USR-TC - mailman.xmission.com

HARM & HiPer Access Router card
by Jim Mc Cay 22 Jan '03

22 Jan '03

Hello, I'm trying to connect to a Hiper Access Router card using HARM V2.2.6 When I try to connect I get this message: Your Router is running version V4.1.11 HARM 2.2 works with ARC5.2* Sorry for sounding like a newbie (because I am) but, what do I need to do to correct this issue? Find / use a different program? Use an older version of HARM? Any help - instruction - direction would greatly be appreciated. Thanks, jim

2 1

RE: [USR-TC] Unable to CHAP
by Joel - Fox Computers 21 Jan '03

21 Jan '03

What are you using for Radius? I know Radius can be funny with chap - I use IAS on Win2K for Radius, and I know you have to change some things on the server before creating users to make it work. -----Original Message----- From: alex [mailto:alex@wanex.ge] Sent: Saturday, January 18, 2003 7:15 AM To: USR-TC(a)mailman.xmission.com Subject: [USR-TC] Unable to CHAP i enabled chap authentication on HiperARC by : SET PPP AUTHENTICATION_PREFERENCE CHAP and SET PPP RECEIVE_AUTHENTICATION CHAP but it doesnt seem to work. i dialed into HiperARC by HyperTerminal and got login prompt but not chap challenge. how is it possible to enable chap authentication and disable pap? (i have HiperARC V4.1.59) _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

5 4

RE: [USR-TC] connection type
by BSmith＠solunet.com 21 Jan '03

21 Jan '03

-----Original Message----- From: Kancha . Subject: [USR-TC] connection type I am placing my 3com TC 1000 at telco. Few E1 lines will be connected to TC then from tc I need to connect to a DSL modem which will connect to my ISP. How can i connect my TC to DSL ?? are there any spcial cards for TC ? Can i use the WAN port on TC (rj45) ? The DSL will have v.24 or v.25 or g703 connection type. __________________________________________________ Kancha, The "Wan" port is a 115200 port used to connect primarily a dial up modem too, for remote access. That won't get you to far. The TC1000 use to have DSL support, but that was making it act as a DSLAM. But, you don't want to do that. What you want to do, is to get a DSL router, and connect via ethernet. SO, it would go, ARC => SWITCH => ROUTER. Just like if you had an actual T1. Thanks, Brian Smith CCNA, NCSA Network Support Engineer SOLUSERVE www.solunet.com 1571 Robert J. Conlan Blvd., Suite 110 Palm Bay, FL 32905 (888)449-5766 fax: (321)-676-1287

1 0

Upgrading 3Com HiPer ARC NAC Software Version
by Jim Mc Cay 21 Jan '03

21 Jan '03

Hi. I have a 3Com Total Control Chasis that has several 3Com HiPer ARC NAC cards in it. I'm trying to upgrade the Software on these cards to 5.3.2. Some of these cards have: #of cards software version Hardware Version DRAM Flash 2 4.1.11 19.0.0 131072 16384 1 4.1.72 19.0.0 65536 8192 1 4.2.32 19.0.0 131072 16384 1 5.3.107 23.0.0 131072 16384 Everytime I go to update these cards using 3Com's total control Manger software v8.2.6 the update gets to about 80% then stops, says it's completed. The cards get stuck/hung up and I have to power cycle the chasis. The cards keep the same software version. Could someone tell me what I might be doing wrong. Do I have to upgrade these cards in increments? Can't I just flash-update them directly to the 5.3.2 update? Any help would be appreciated. Thanks, jim jmccay(a)adsnet.com

6 6

connection type
by Kancha . 20 Jan '03

20 Jan '03

I am placing my 3com TC 1000 at telco. Few E1 lines will be connected to TC then from tc I need to connect to a DSL modem which will connect to my ISP. How can i connect my TC to DSL ?? are there any spcial cards for TC ? Can i use the WAN port on TC (rj45) ? The DSL will have v.24 or v.25 or g703 connection type. __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com

1 0

Fully Loaded Hiper Chassis $4750.00 each
by sky1 20 Jan '03

20 Jan '03

Thanks to all that have purchased these chassis from us. Still have a few more left in stock to move!! Trying to get rid of 6 or 7 fully loaded hiper chassis. They are all V.92 upgraded Chassis consists of: (14) Hiper DSP T-1 V.92 (2) Hiper ARC 128Mb version (1) Hiper NMC (2) 130 Amp AC power supplies Refurbished excellent condition!!! 6 month warranty $4750.00 each Shannan Young SouthWest Data Technology, Inc. 972-739-7010 972-739-7013 (Fax) sky1(a)airmail.net www.swdt.com

2 1

VOIP
by Randy Cosby 20 Jan '03

20 Jan '03

I'm curious if anyone on the list has used the 3com boxes for VOIP at all. With the prices getting so low for the hardware, I'm wondering if we shouldn't be looking at ways to reuse these boxes. Randy Cosby Vice President InfoWest, Inc P: 435-674-0165x1011 F: 435-674-9654

1 0

hiper nmc
by matthew 20 Jan '03

20 Jan '03

oops.

1 0

Re: [USR-TC] Unable to CHAP
by alex 20 Jan '03

20 Jan '03

does it mean that i wouldnt be able to telnet this arc? i have just 1 login (manage) user (like adm). actually i dont need dialin/dialout login users. so i have set all ports to network type (do i have to set SLOT:x/CON:1 to network type too? ). > Yes you can but that would mean that you will have all your users just do > PPP and nothing else. What you have now guarantees you that ppp users will > do only chap, however you could have non-ppp users such as login/terminal > users who can use the system. If you setup all the users just as network > users or if you setup all the ports just as network ports you can gurantee > no one can the terminal/login thus stop all cleartext login. > > > -V > > > On 1/18/03 7:59 AM, "alex" <alex(a)wanex.ge> wrote: > > > so how can i disable cleartext logins? > > > >> How do you expect to do chap using terminal? Terminal is always cleartext > >> authentication. You need to use a ppp client that supports chap (win2k. XP, > >> etc) and dialin using ppp. That is how you do chap. > >> > >> -V > >> > >> > >> > >> On 1/18/03 7:14 AM, "alex" <alex(a)wanex.ge> wrote: > >> > >>> i enabled chap authentication on HiperARC by : > >>> SET PPP AUTHENTICATION_PREFERENCE CHAP and > >>> SET PPP RECEIVE_AUTHENTICATION CHAP > >>> but it doesnt seem to work. > >>> i dialed into HiperARC by HyperTerminal and got login prompt but not > > chap > >>> challenge. > >>> > >>> how is it possible to enable chap authentication and disable pap? > >>> (i have HiperARC V4.1.59) > >>> > >>> _______________________________________________ > >>> USR-TC mailing list > >>> USR-TC(a)mailman.xmission.com > >>> http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > >>> > >> > >> > >> _______________________________________________ > >> USR-TC mailing list > >> USR-TC(a)mailman.xmission.com > >> http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > > > > > > _______________________________________________ > > USR-TC mailing list > > USR-TC(a)mailman.xmission.com > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

4 5

Re: [USR-TC] Unable to CHAP
by alex 18 Jan '03

18 Jan '03

so how can i disable cleartext logins? > How do you expect to do chap using terminal? Terminal is always cleartext > authentication. You need to use a ppp client that supports chap (win2k. XP, > etc) and dialin using ppp. That is how you do chap. > > -V > > > > On 1/18/03 7:14 AM, "alex" <alex(a)wanex.ge> wrote: > > > i enabled chap authentication on HiperARC by : > > SET PPP AUTHENTICATION_PREFERENCE CHAP and > > SET PPP RECEIVE_AUTHENTICATION CHAP > > but it doesnt seem to work. > > i dialed into HiperARC by HyperTerminal and got login prompt but not chap > > challenge. > > > > how is it possible to enable chap authentication and disable pap? > > (i have HiperARC V4.1.59) > > > > _______________________________________________ > > USR-TC mailing list > > USR-TC(a)mailman.xmission.com > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > > > > _______________________________________________ > USR-TC mailing list > USR-TC(a)mailman.xmission.com > http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1