December 2002 - USR-TC - mailman.xmission.com

RE: [USR-TC] Firmware payload
by RickL＠solunet.com 19 Dec '02

19 Dec '02

Please see TCS 4.5 "Service Release" in Commworks SW Library if loading TCS4.5 -----Original Message----- From: Lewis Bergman [mailto:lbergman@wtxs.net] Sent: Wednesday, December 18, 2002 5:52 PM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] Firmware payload On Monday 16 December 2002 11:44 pm, Joel - Fox Computers wrote: > Stay away from DSP 3.5.12 - it's the devil. Agreed. Many modems wouldn't talk to this version -- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 915-695-6962 ext 115 _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

1 0

ISDN -> Quad -> serial?
by Charles Sprickman 19 Dec '02

19 Dec '02

Hi, Can anyone confirm that with an old quad/netserver chassis you can accept ISDN calls on the PRI card, shuffle them off to the modem, and (if the netserver is inactive on that card), pump the data out the dte port on the quad (with analog nic)? I found an old post alluding to that, just wondering if anyone has done it. I assume there's also some sort of hack-around where the user would hit the netserver and do a reverse-telnet to the serial port... Any ideas? Thanks, Charles -- Charles Sprickman spork(a)inch.com

4 7

RE: [USR-TC] Firmware payload
by Joel - Fox Computers 18 Dec '02

18 Dec '02

Stay away from DSP 3.5.12 - it's the devil. -----Original Message----- From: Joshua Coombs [mailto:jcoombs@gwi.net] Sent: Monday, December 16, 2002 2:01 PM To: usr-tc(a)mailman.xmission.com Subject: [USR-TC] Firmware payload Were looking at upgrading firmware from a mishmash of 4.3 and 4.5 code to 4.5 all around. After digging around, we've settled on a set of revisions to go for, but want to bounce it off others before we go all the way. Anyone see any reasons not to upgrade to the following code revs?: Current Firmware Payload: DS3 - 1.3.7 DSP - 3.1.110 NMC - 8.7.3 ARC - 5.2.112 Suggested Upgrade: DS3 - 1.3.7-4 DSP - 3.5.12 NMC - 8.7.3 ARC - 5.3.110 Joshua Coombs GWI Networking _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1

WTB Total Scrutinizer
by Linknet Administration 17 Dec '02

17 Dec '02

Anyone got a copy of Total Scrutinizer they would like to part with? Thanks, Peter Bundy The contents of this e-mail and its attachments are confidential and may be subject to legal professional privilege and copyright. It is intended solely for the addressee. Access to this e-mail and its attachment by anyone else is unauthorized. No representation is made that this e-mail or any attachment is free of viruses and other defects. Virus scanning is recommended and is the responsibility of the recipient. If you are not the intended addressee, any disclosure, usage, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited. If you have received this communication in error, please advise the sender immediately by reply e-mail and delete this message from your computer. Thank you for your cooperation. LINKNET INTERNET SERVICE PROVIDERS 18 Tincogan Street Mullumbimby NSW 2482 AUSTRALIA Ph: +612 66843345 Fax: +612 66843503 postal:- PO Box 520 Mullumbimby NSW 2482 AUSTRALIA for Guaranteed customer support & Quality assured service http://www.linknet.com.au

2 1

96 or 24 ports cards with v92
by eric＠dol.net 16 Dec '02

16 Dec '02

What are the more reliable cards? The 96 or the 24 port card in real life use and is the v.92 modem code useable and better than the code used in older netserver based chassis? We would like to upgrade and only want to do this one more time. Any configuration does and don't would be appreciated. thanks eric cAt 01:36 PM 12/13/2002 -0500, you wrote: >Sorry for a delay in my response. >I should have explained that warranty better. > >Sorry Tom. > >1 year warranty >Exchange and / or repair >Through WRCA - Me. > >This warranty has nothing to do with Commworks. >Cant you tell. Look at the price :) > > >At 12:23 PM 12/13/2002 -0600, you wrote: > >>Steve, >> >>Who does the Warrantee work? How does your warrantee work? >> >>Product purchased Used is not covered under the CommWorks Warrantee. Even >>if its never been open. >> >>Let me know, >> >>TG >> >> >> >> >>"Stephen Rivera - WRCA.Net" <steverivera(a)wrca.net>@mailman.xmission.com on >>12/12/2002 11:07:01 AM >> >>Please respond to usr-tc(a)mailman.xmission.com >> >>Sent by: usr-tc-admin(a)mailman.xmission.com >> >> >>To: "usr-tc @lists.xmission.com" <usr-tc(a)mailman.xmission.com> >>cc: >>Subject: [USR-TC] MultiSpan / Hiper Bundles - 1year warranty >> >> >>As you guys can tell the market is full of the TC1000. >>As I buy them I am pleasantly surprised to see the >>recent codes and cards. The result: 1 year warranty. >> >>192 port MultiSpan TC1000 V.92 >>Chassis w/ dual 130Amp AC power supplies P/N: 542635-02 >>(2) 96port Multi Span Nac's >>(2) Hiper Access Router Card 128/16 >>Hiper NMC >>(2) AC PSU 130 Amp Nac >>$7500 - 1 year warranty >> >>336 port TC1000 v92 >>Chassis w/ dual 130Amp AC power supplies P/N: 542635-02 >>Hiper NMC >>(2) Hiper ARC 128Mb version (NIC/NAC set) >>(14) Hiper DSP (T-1 NIC/NAC) >>$7000.00 - 1 year warranty >> >>If you are looking for individual cards I have them too. >> >>Technical Support Available. >> >> >>_______________________________________________ >>USR-TC mailing list >>USR-TC(a)mailman.xmission.com >>http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc >> >> >> >> >> >>_______________________________________________ >>USR-TC mailing list >>USR-TC(a)mailman.xmission.com >>http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc > > >Steve Rivera IM: srivera711 >Toll Free: (877)WRCANET x102 DIRECT: 732-833-2034 >Fax available equipment to: (732)833-2115 >for more product info got www.wrca.net > > >_______________________________________________ >USR-TC mailing list >USR-TC(a)mailman.xmission.com >http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc >

3 2

Firmware payload
by Joshua Coombs 16 Dec '02

16 Dec '02

Were looking at upgrading firmware from a mishmash of 4.3 and 4.5 code to 4.5 all around. After digging around, we've settled on a set of revisions to go for, but want to bounce it off others before we go all the way. Anyone see any reasons not to upgrade to the following code revs?: Current Firmware Payload: DS3 - 1.3.7 DSP - 3.1.110 NMC - 8.7.3 ARC - 5.2.112 Suggested Upgrade: DS3 - 1.3.7-4 DSP - 3.5.12 NMC - 8.7.3 ARC - 5.3.110 Joshua Coombs GWI Networking

2 1

RE: [USR-TC] HELP: Lightning HiPerDSP
by support＠inet2000.com 16 Dec '02

16 Dec '02

We've been trying to... but some of the wording is different, and it's different than the TelCo's wording again, so they're not a lot of help on knowing how our equipment should be set. Are you saying that the eAndMTypeII is the same as linkEMImmediateStart? On 9/5/02 12:38 PM, USR-TC(a)MAILMAN.XMISSION.COM wrote to SUPPORT: -> Try changing the setting on the DSP DialTrnkType: loopStart to EAndM Type II -> -> At the very least you should configure the DSP to these same settings that -> worked for you on your other gear. -> -> Todd -> -> -----Original Message----- -> From: usr-tc-admin(a)mailman.xmission.com -> [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of -> support(a)inet2000.com -> Sent: Thursday, September 05, 2002 2:04 PM -> To: usr-tc(a)mailman.xmission.com -> Subject: Re: [USR-TC] HELP: Lightning HiPerDSP -> -> -> The other equipment has some differences and some different wording for the -> settins. It lists.... -> -> Line Type : dsx1ESF -> Coding : dsx1B8ZS -> RecEqualiz: linkRxEqualizerOff -> LineBuildOut: t1Pulse0dB -> fd1: : Ansi-T1-403 -> Mode: : robbedBit -> robbedbitprotocal: linkEMImmediateStart -> MessageOrientedSwitchType: ni1 -> NFAS InterfaceID: 0 -> NFAS Primary WAN: 1 -> Loobackconfig: NoLoop -> SendCode: SendNoCode -> -> So, as far as we can tell, the settins are the same on everything they cross -> over on... We're just really stumped here. -> -> Are there settings in the ARC or NMC that can cause a dead air answer? -> -> On 9/5/02 11:57 AM, USR-TC(a)MAILMAN.XMISSION.COM wrote to SUPPORT: -> -> -> -> -> > We get the same results on two different DSP cards, yet the T1 works on -> our -> -> > old backup equipment, so it must be OK. -> -> Why not get the proper line settings from the old equipment and use -> those? -> -> -- -> -> Lewis Bergman -> -> Texas Communications -> -> 4309 Maple St. -> -> Abilene, TX 79602-8044 -> -> 915-695-6962 ext 115 -> -> -> -> _______________________________________________ -> -> USR-TC mailing list -> -> USR-TC(a)mailman.xmission.com -> -> http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc -> -> -> -> -> _______________________________________________ -> USR-TC mailing list -> USR-TC(a)mailman.xmission.com -> http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc -> -> -> -> -> _______________________________________________ -> USR-TC mailing list -> USR-TC(a)mailman.xmission.com -> http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

3 2

Re: [USR-TC] MultiSpan / Hiper Bundles - 1year warranty
by Thomas_Goodman＠3com.com 16 Dec '02

16 Dec '02

Steve, Who does the Warrantee work? How does your warrantee work? Product purchased Used is not covered under the CommWorks Warrantee. Even if its never been open. Let me know, TG "Stephen Rivera - WRCA.Net" <steverivera(a)wrca.net>@mailman.xmission.com on 12/12/2002 11:07:01 AM Please respond to usr-tc(a)mailman.xmission.com Sent by: usr-tc-admin(a)mailman.xmission.com To: "usr-tc @lists.xmission.com" <usr-tc(a)mailman.xmission.com> cc: Subject: [USR-TC] MultiSpan / Hiper Bundles - 1year warranty As you guys can tell the market is full of the TC1000. As I buy them I am pleasantly surprised to see the recent codes and cards. The result: 1 year warranty. 192 port MultiSpan TC1000 V.92 Chassis w/ dual 130Amp AC power supplies P/N: 542635-02 (2) 96port Multi Span Nac's (2) Hiper Access Router Card 128/16 Hiper NMC (2) AC PSU 130 Amp Nac $7500 - 1 year warranty 336 port TC1000 v92 Chassis w/ dual 130Amp AC power supplies P/N: 542635-02 Hiper NMC (2) Hiper ARC 128Mb version (NIC/NAC set) (14) Hiper DSP (T-1 NIC/NAC) $7000.00 - 1 year warranty If you are looking for individual cards I have them too. Technical Support Available. _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

3 2

ne050303.zip
by Travis M. Best 14 Dec '02

14 Dec '02

Does anyone have a copy of ne050303.zip they can send me? Thanks, Travis Best

1 0

RE: [USR-TC] tcm doesn't find nmc
by RickL＠solunet.com 14 Dec '02

14 Dec '02

Back in the console: make sure you verify community strings and if unknown, reset authorized stations. Either one can prevent connection with TCM. Hate to say it, but be sure and make sure you can't ping your NMC address when the Ethernet cable is unplugged as well. (just to rule out Dup. IP). Rick Team Solunet -----Original Message----- From: Timothy C. Bohen [mailto:Tim@CMSInter.Net] Sent: Wednesday, December 11, 2002 9:16 AM To: usr-tc(a)mailman.xmission.com Subject: RE: [USR-TC] tcm doesn't find nmc This is pretty useless info. But Steve you need to fix your sig :) "for more product info got www.wrca.net" Timothy C. Bohen CMSInter.Net LLC / Crystal MicroSystems LLC =========================================== web : www.cmsinter.net email: tim(a)cmsinter.net phone: 989.235.5100 x222 fax : 989.235.5151 -----Original Message----- From: usr-tc-admin(a)mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of Stephen Rivera - WRCA.Net Sent: Tuesday, December 10, 2002 11:01 AM To: usr-tc(a)mailman.xmission.com Subject: Re: [USR-TC] tcm doesn't find nmc Can you ping it? If not I had a similar incident yesterday. Through the console port verify that the ethernet is enabled. I think its number 5 or 6 on the console menu. Hope that helps. At 03:35 PM 12/10/2002 +0330, you wrote: >Hi all >I want to connect to nmc with tcm (windows) but tcm reports: "device not >responding" >snmp strings are correct and nmc ip ping in lan with no problem. >any suggestion? >Regards >Shahrooz Steve Rivera IM: srivera711 Toll Free: (877)WRCANET x102 DIRECT: 732-833-2034 Fax available equipment to: (732)833-2115 for more product info got www.wrca.net _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc _______________________________________________ USR-TC mailing list USR-TC(a)mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc

2 1