March 2000 - USR-TC - mailman.xmission.com

(usr-tc) Any interest in Qty non-NMC cards?
by Steve Rivera 10 Mar '00

10 Mar '00

I have 150 non v90 nmc cards available. anyone out there that could use or buy a qty? .................................................... Worldwide Provider of Network Hardware Since 1981. Steve Rivera - v-732-833-2111 / 732-433-5890 24Hr Email Page 7324335890(a)page.nextel.com http://www.ISP-NetworkHardware.com or http://www.wrca.net Cisco, Ascend, Livingston, USR, Microcom, Motorola Computone, Kentrox, Adtran...and more - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Websites failing on TCHub vs Ascend... Where to star t?
by Colin Wantling 10 Mar '00

10 Mar '00

Robb, try setting the framed MTU size to 1500 in user Radius records. regards, Colin > ---------- > From: Robb Bryn[SMTP:rbryn@cape-fear.net] > Reply To: usr-tc(a)lists.xmission.com > Sent: Sunday, March 05, 2000 7:21 PM > To: 'usr-tc(a)lists.xmission.com' > Subject: (usr-tc) Websites failing on TCHub vs Ascend... Where to > start? > > > We recently have been getting numerous complaints from our users about > websites that are dog slow or not coming up at all. Normally I wrote it > off > as "net traffic" and kept going. Recently we installed an Ascend Max > product and an old Portmaster product. It appears that users dialing into > the TCHub are having difficulty with specific sites where users dialing > into > the Ascend and Portmaster products are having no trouble at all with the > same sites. 90% of all sites are accessable from the TCHub while specific > sites continue to fail (starnews.wilmington.net, www.genforum.com are two > examples). > > Where do I begin to troubleshoot this problem? > > TCHub versions > HARC = 4.2.32 > DSP = 2.0.51 > > > > Thanks > Robb Bryn > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) FS: USR Hiper ARC
by Steve Rivera 09 Mar '00

09 Mar '00

Qty 1- available tomorrow. Asking $1900 or BO. .................................................... Worldwide Provider of Network Hardware Since 1981. Steve Rivera - v-732-833-2111 / 732-433-5890 24Hr Email Page 7324335890(a)page.nextel.com http://www.ISP-NetworkHardware.com or http://www.wrca.net Cisco, Ascend, Livingston, USR, Microcom, Motorola Computone, Kentrox, Adtran...and more - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Filter-Id
by Scott Bailey 09 Mar '00

09 Mar '00

Can 3Com NETServers be configured to use the Radius Filter-Id attribute? Any experiences good or bad with this? -- Scott Bailey Systems Administrator Epix Internet Services scott(a)epix.net 570-631-1317 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

8 13

(usr-tc) HiperAc AND Routing Adverisments!
by Talal Ghaith 09 Mar '00

09 Mar '00

Hi we used to have a singel HiperArc along with cisco routers, and customers who are assigned a static IP address will have to be staticly routed to the ip address of the hiperarc. and the Gateway Cisco router i did the following i gave the subclass where all my static IP addressed customers a static route with a hight metric ip route XXXX gateway 200 (where XXXX are the static ip addresses, 200 is the metric) Now the dialing in customer if landed on a cisco router, the gateway will know where to get that ip address because of the advertizment of the cisco router and will definitly give it a smaller metric and hence will work fine, Now, if it links to the Hiper it will follow that static route since no one else is advertizing that IP address! The problem occured when i had the second Hiperarc! i really need the hiper to advertize any ip address that is connected to it !! anybody have a clue! cheers tolio - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 4

(usr-tc) Websites failing on TCHub vs Ascend... Where to start?
by Robb Bryn 09 Mar '00

09 Mar '00

We recently have been getting numerous complaints from our users about websites that are dog slow or not coming up at all. Normally I wrote it off as "net traffic" and kept going. Recently we installed an Ascend Max product and an old Portmaster product. It appears that users dialing into the TCHub are having difficulty with specific sites where users dialing into the Ascend and Portmaster products are having no trouble at all with the same sites. 90% of all sites are accessable from the TCHub while specific sites continue to fail (starnews.wilmington.net, www.genforum.com are two examples). Where do I begin to troubleshoot this problem? TCHub versions HARC = 4.2.32 DSP = 2.0.51 Thanks Robb Bryn - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 3

(usr-tc) Hiper ARC + Radius
by Grzegorz Paszka 09 Mar '00

09 Mar '00

Hi. I'm using 3Com TCH with DSP (2.0.19) and ARC (4.2.32) cards and cistron 1.6.2. When user is doing multilink PPP connection over ISDN then Hiper ARC is sending two Start accounting records. But when user drops connection, ARC sends only one Stop record. And radius reports that user is still connected via one ISDN channel. But of course user isn't connected at all. I've got simple question : Is there any way to force Hiper ARC to send two Stop accounting records for droped multilink PPP ? Best regards. -- Grzegorz Paszka, System Administrator, Gliwice ul. Toszecka 102 e-mail: Grzegorz.Paszka(a)pik-net.pl tel. 48-32-2327070 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

3 3

(usr-tc) Error: client/server mismatch
by Garlic 08 Mar '00

08 Mar '00

The follwoing error has started to appear on one of my HiperARCs Mar 7 08:17:08 xxxxxxxx At 16:17:08, Facility "User Manager", Level "UNUSUAL":: AUTH: Most likely client/server configuration mismatch Any idea what the problem is? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 2

(usr-tc) Modems coming off hook on DSP
by System Administrator 08 Mar '00

08 Mar '00

Hi all, I'm pretty sure I've got a bad DSP, but I thought I'd ask if there's something I'm missing. Here's the info: 2 HARC's, 10 DSP's w/T1's, 1 DSP for spare. I set the proper ownership for cards and have verified by doing a list chassis. The DSP in slot 10 all of a sudden stops taking calls. I plugged the T-Berd into the circuit - the telco side shows no activity, but all channels on the DSP side show off hook - which busy's out the circuit. If I throw a loopback in the circuit at the DSX panel, leave it for a minute, then remove it, the DSP starts taking calls for about a day, then the same thing happens. If I move the T1 to the spare card, it works fine. Any ideas? __________________________________ Justin Ellison System Administrator InternetUSA sysadmin(a)nebi.com http://nebi.com 800-603-3502 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Pleaseeee help me (ISDN Service)!!!
by Jorge Lozano 08 Mar '00

08 Mar '00

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi... Can anybody that have a chassis with netserver, quads cards and a dual e1/PRI, help me with the configuration for ISDN service? please... Jorge Lozano <jorge(a)andinet.com> SA and ISSO Andinet On Line Please visit, http://www.andinet.com -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.3 for non-commercial use <http://www.pgp.com> iQA/AwUBOMWbWKp3oywyFVUlEQJbGQCgjdxg5HyutD9+aBlfqvakN8V2OwcAoJC+ UqBtH72Wy7DMADcE277Oi8xO =+e6m -----END PGP SIGNATURE-----

1 0