March 2000 - USR-TC - mailman.xmission.com

(usr-tc) Wholesale DSL ?
by jeff.binkley＠asacomp.com 20 Mar '00

20 Mar '00

Is anyone aware of wholesale DSL providers that also provide Internet service like the dialup whoesalers ? Thanks, Jeff Binkley ASA Network Computing - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

6 8

(usr-tc) hung modems return
by K Mitchell 20 Mar '00

20 Mar '00

After about 3 months of problem-free operation, I'm getting hung modem pairs again on one of my DSPs. DSPs are 0.49.0 running 2.0.81, ARC 4.2.32. I guess it's time to look at upgrading. Exactly what is the newest DSP PRI code, and how stable is it? Thanks, -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000/886-2500 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

5 4

(usr-tc) hung modems
by Dick 19 Mar '00

19 Mar '00

I am pasting my versions as extracted from the TCM. I am at a loss for why sets of modems hang and the card requires a reboot every few days. We have 2 such racks, both with the same versions of the code and they both do this now. (one more than the other). And it seems, but could just be perception, that it is only associated with a few cards/lines. On the rack shown below it is card 1 and card 5, for sure, that do this. I know I have seen this problem talked about. Has anyone seen if this is a line level problem from the telco or something? Both of these units are within a city block of the telco switch. Can I add attenuation on the line with some type of resistance or set it in the unit itself? If I could test things without the telco getting involved everything would go much smoother. 3Com 17-Slot Chassis with PB clocking 1 3COM High-Density 24 Channel NAC B158CSZA 1OQ 0.49.0 8192 2048 0000000000000000 2.0.19 2 3COM High-Density 24 Channel NAC B168CVPA 1OQ 0.49.0 8192 2048 0000000000000000 2.0.19 3 3COM High-Density 24 Channel NAC BCI7C8M4 1OQ 0.49.0 8192 2048 0000000000000000 2.0.19 4 3COM High-Density 24 Channel NAC BC97B9Z4 1OQ 0.49.0 8192 2048 0000000000000000 2.0.19 5 3COM High-Density 24 Channel NAC B249S10G 1OQ 0.53.0 8192 2048 0000000000000000 2.0.19 6 3COM High-Density 24 Channel NAC BC87B123 1OQ 0.49.0 8192 2048 0000000000000000 2.0.19 7 3COM High-Density 24 Channel NAC B229Q4AG 1OQ 0.53.0 8192 2048 0000000000000000 2.0.19 8 3COM High-Density 24 Channel NAC B789BLGM 1OQ 0.54.0 8192 2048 0000000000000000 2.0.19 16 3COM HiPer ARC NAC B478PF8Y 20C 19.0.0 65536 8192 0000000000010000 4.2.32 17 3COM Network Management Card with clock B4F8Q4Y6 1U600000 6.0 16384 8192 0000000000000000 6.1.17 1 3COM T1/E1 HDM NIC 0 0 0000000000000000 2 3COM T1/E1 HDM NIC 0 0 0000000000000000 3 3COM T1/E1 HDM NIC 0 0 0000000000000000 4 3COM T1/E1 HDM NIC 0 0 0000000000000000 5 3COM T1/E1 HDM NIC 0 0 0000000000000000 6 3COM T1/E1 HDM NIC 0 0 0000000000000000 7 3COM T1/E1 HDM NIC 0 0 0000000000000000 8 3COM T1/E1 HDM NIC 0 0 0000000000000000 16 3COM Dual 10/100 Ethernet NIC - PCI based 0 0 0000000000000000 17 3COM Ethernet NIC 0 0 0000000000000000 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) FYI...keep your eyes open...
by Jeff Mcadams 17 Mar '00

17 Mar '00

http://news.cnet.com/news/0-1004-200-1574706.html?tag=st.ne.1002.bgif?st.ne… Just an FYI of what might be coming up. I see the possibilities presented here as overall a good thing. Maybe part of this will be to quit trying to make CSO a profitable business unit. :) -- Jeff McAdams Email: jeffm(a)iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) FlexPath configuration
by Richard Roy 17 Mar '00

17 Mar '00

Hi, I would like to know the value for those HiperDSP parameters use with a CH-T1 FlexPath. My config shows: Dial in Address: Noaddress Ack Wink on dial in address info: Enabled (for the first and the last flexpath in the trunk) Every others DSP are set to disabled. Note: What happens otherwise (first flexpath ack wink = disabled) is that once that trunk fill up, none of the rest will accept calls - the customer hears the dialing, then dead air. Thank you. Richard Roy, CCNA Technical Associate Network Intelligence Design Richard.Roy(a)aliant.ca Phone: (506) 694-6983 Fax: (506) 694-2525 www.nbtel.nb.ca www.aliant.ca - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) TC Rack Power Consumption
by USRobotics TC Mailing List 16 Mar '00

16 Mar '00

Great, helped me out a lot. -----Original Message----- From: Andy [mailto:andy@mega-mail.far.net] Sent: Wednesday, March 15, 2000 2:47 PM To: USRobotics TC Mailing List Subject: Re: (usr-tc) TC Rack Power Consumption We have some of our older dialup hardware (TC w 1 70amp PS + 12 quads) running on Smart UPS 900's... They work quite well and will run the units for ~20 mins. The newer stuff (TC w/2 70amp PS + 9 pri DSP's) we run off our matrix xr, and I find they draw about 1kv. So you'd want to go with atleast a 1400 ups. Don't know if this will actually be any help... :) If anything make sure you over-buy on the ups. A few years ago we were having major problems with some netserver cards that we found went away when we got our first matrix system online. Andy > >I am trying to find out what the power requirements are for a couple of >different rack configurations, in order to figure out what size UPS I >require for each rack. >I've researched the 3com newsgroup, as well as the list serv and the support >site, but haven't been able to find any usable information. >One Hiper rack running Dual 70 Amp PS & 7 HiPer DSP's >One Hiper rack running Dual 70 Amp PS & 1 HiPer DSP >Two Racks running Dual 45 Amp PS & 12 Quad's >Any feedback appreciated. > > >- > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > > ----- Andy <andy(a)mega-mail.far.net> Far Networks http://www.far.net/ - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) Defective modem etc.
by bert.f＠staff.pacific.net.ph 16 Mar '00

16 Mar '00

Hi! I believed there a command to show which modem is defective in a HiperDSP card, but right now i can't seem to find it, any one has knoe this command? Thanks, Bert Herbert Frias Network-RAS Group Pacific Internet, Philippines Tel.(632) 637-1700 DL. (632) 683-7164 Fax. (632) 683-7197/98 - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

4 4

Re: (usr-tc) Defective modem etc.
by Campbell Simpson 16 Mar '00

16 Mar '00

Hi Mitch I'd be interested in the perl script also. Cheers Campbell >>> mitch(a)keyconn.net 03/16/00 06:01 >>> At 07:49 PM 3/15/00 +0800, bert.f(a)staff.pacific.net.ph wrote: >Hi! > >I believed there a command to show which modem is defective in a HiperDSP >card, but right now i can't seem to find it, any one has knoe this command? I'm not aware of a command, but there is a perl script that will poll the chassis for modem failure rates and write the results to a web page. I can't remember where I got it, called badmodems.pl. Let me know if you can't find it, I can get a copy to you later this afternoon. -- Kirk Mitchell-General Manager mitch(a)keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000/886-2500 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) TC Rack Power Consumption
by USRobotics TC Mailing List 16 Mar '00

16 Mar '00

I am trying to find out what the power requirements are for a couple of different rack configurations, in order to figure out what size UPS I require for each rack. I've researched the 3com newsgroup, as well as the list serv and the support site, but haven't been able to find any usable information. One Hiper rack running Dual 70 Amp PS & 7 HiPer DSP's One Hiper rack running Dual 70 Amp PS & 1 HiPer DSP Two Racks running Dual 45 Amp PS & 12 Quad's Any feedback appreciated. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

RE: (usr-tc) Weird characters appearing as User-Name in HiperARC
by Colin Wantling 14 Mar '00

14 Mar '00

Hi, I don't know the cause, but setting PPP to OFFLOAD in the HiperArc reduces if not eliminates the problem. regards, Colin Wantling Energis NV, Netherlands > ---------- > From: Louis_Sim@3com.com[SMTP:Louis_Sim@3com.com] > Reply To: usr-tc(a)lists.xmission.com > Sent: Tuesday, 14 March 2000 5:52 > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) Weird characters appearing as User-Name in HiperARC > > > > Hi there, > > I have a customer in Sinagpore using HARC 4.1.59-6 for dial-in user (newly > installed). > > The problem they are having is that when monitoring the account records > using > monitor radius. It shows many unknown userid. Sample below. > User-Name : > Â»Â®ÃÃ¦qÂ¢_'Ã³Ã_iÃ®Ã®_Â·Ã£Â»yÃ½_Ã©Ã¸&_Â¥'EÂ¥Ykg_Â·ÃÂ¤Ã_Ã¨ÃÃ·Â¡m$Â¡58|_Â·_D_Ec_k__gÂ¿Â·oA_Â© > User-Name : > Â»Â®ÃÃ¦qÂ¢_'Ã³Ã_iÃ®Ã®_Â·Ã£Â»yÃ½_Ã©Ã¸&_Â¥'EÂ¥Ykg_Â·ÃÂ¤Ã_Ã¨ÃÃ·Â¡m$Â¡58|_Â·_D_Ec_k__gÂ¿Â·oA_Â© > User-Name : S7895476u' > User-Name : Ã'#ÃÂ°1_y_Ã·ÃÃ Â¿>oÃªÂ°Ã¨z_&_, > Â²Ã½_ÃÃ®Ã¾@|#Ã__Ã¦ZÃÃ_ÃÃÂ²ÃÃ¶ÃÃ*_Â´GVXÃRÃ°EUR,_34Ã___A-rÂ§- > > Customer is using Radius for Authentication. > > Any ideas as to why this is happening. > > Thanks in advance for any contributions. > > Regards. > Louis Sim > > > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. > - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0