montgomery_boats
Threads by month
- ----- 2025 -----
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2024 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2023 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2022 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2021 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2020 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2019 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2018 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2017 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2016 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2015 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2014 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2013 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2012 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2011 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2010 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2009 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2008 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2007 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2006 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2005 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2004 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2003 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2002 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2001 -----
- December
- November
- 16153 discussions
I "turtled" my Potter 14 (masthead pointing at the bottom) the first day I sailed such a small boat, due to some rookie mistakes. I was screaming downwind with the centerboard up, and a 30+ knot gust hit me on the beam; she went clear over because the cabin filled up as we capsized. It was easy to right after I dove down to the cockpit and released the sheets, but the water was memorably cold. Funny how I have not done that again in 33 years. In the Potter, I never sail with the centerboard up, never cleat off the main, and never leave the cabin open; simple. On my M17 I mounted the mainsheet cleat upside down so it will pop loose with a yank in one of those frantic moments you can't predict. Beyond that, just have fun. I love lake sailing, but it is much different than the ocean. You can't daydream because the wind direction and speed are so variable, and you have to keep in mind what to do with those sheet if you heel wildly or capsize.
5
4
Well it is time to leave this group. I just am tried of the pages of repeat, repeat in the pages of writing. I will be keeping the montgomery face book group up and running. See ya there.
Mack
Sent from my iPad
3
2
I have a Monty 15, a 2007, hull # 641. It was built by NorSea boat builders. My beautiful boat doesn't have any added flotation at all under the vbirth , just a huge storage space under the vbirth. Also, there is no added flotation under the cockpit floor. There is no added positive flotation material at all.
I talked to Mr. Eng, owner of the company. He said that the extra floatation isn't necessary because the boat can't be knocked over. He suggested that I put an inner tube under the cockpit floor if it bothered me. He did say that all of the forward individual lockers are floatation.
My opinion is that if you put the weather boards in place and close the hatch, water isn't going into the cabin.
I can only imagine how bad the cabin would smell with a new inner tube in it. I don't think tire stores smell that great.
If it gets windy and rough, be sure to put the boards in and close the hatch, no problem.
Tim Erwin, " Dark Star " # 641
Sent from my iPad
On Mar 29, 2013, at 11:05 AM, montgomery_boats-request(a)mailman.xmission.com wrote:
> Send montgomery_boats mailing list submissions to
> montgomery_boats(a)mailman.xmission.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
> or, via email, send a message with subject or body 'help' to
> montgomery_boats-request(a)mailman.xmission.com
>
> You can reach the person managing the list at
> montgomery_boats-owner(a)mailman.xmission.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of montgomery_boats digest..."
>
>
> Today's Topics:
>
> 1. Re: Towing with the extension out (GARY M HYDE)
> 2. Re: Lifting the M-15 (John Tyner)
> 3. Re: Towing with the extension out (stevetrapp)
> 4. Re: Towing with the extension out (GARY M HYDE)
> 5. Re: Towing with the extension out (Tom Smith)
> 6. Re: Lifting the M-15 (Robert Hall)
> 7. Iron centreboard on M17 (Bill Wickett)
> 8. Re: Iron centreboard on M17 (jerry montgomery)
> 9. Re: Iron centreboard on M17 (W David Scobie)
> 10. Re: Iron centreboard on M17 (Bill Wickett)
> 11. Re: Iron centreboard on M17 (Bill Wickett)
> 12. Re: Iron centreboard on M17 (R.K. Graves)
> 13. Flotation (George R. Iemmolo)
> 14. Re: Flotation (Tom Smith)
> 15. Re: Flotation (Conbert Benneck)
> 16. Re: Flotation (W David Scobie)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 26 Mar 2013 13:54:06 -1000
> From: GARY M HYDE <gmhyde1(a)mac.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Towing with the extension out
> Message-ID: <16941021-5DD7-4467-9876-2416C5BAA172(a)mac.com>
> Content-Type: text/plain; charset=us-ascii
>
> Steve/
> To answer your other Q, I store indoors in winter.
>
> ~~~_/)~~~ Gary
> Sent from my iPhone :-)
>
> On Mar 26, 2013, at 12:06 PM, stevetrapp <stevetrapp(a)q.com> wrote:
>
>> Gary,
>> I am sure that you know this from experience of driving on the winding country roads that surround your sailing area on Lake Couer D' Alene. Do you tow you M-boat home or into town for winter, or store it there at the boat yard?
>> Steve
>>
>> ----- Original Message -----
>> From: "GARY M HYDE" <gmhyde1(a)mac.com>
>> To: "For and about Montgomery Sailboats" <montgomery_boats(a)mailman.xmission.com>
>> Sent: Tuesday, March 26, 2013 2:33 PM
>> Subject: Re: M_Boats: Towing with the extension out
>>
>>
>> Actually the sway is less with the long tongue because the car has better leverage on the trailer.
>>
>> ~~~_/)~~~ Gary
>> Sent from my iPhone :-)
>>
>> On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo" <griemmolo2(a)gmail.com> wrote:
>>
>>> My concern would be that the pivot point (ball hitch) is an increased
>>> distance from the weight (boat) any sway would be greater than normal ("Give
>>> me a lever long enough and I can move the earth") and could cause the auto
>>> to be affected.
>>>
>>> George
>>>
>>> -----Original Message-----
>>> From: montgomery_boats-bounces(a)mailman.xmission.com
>>> [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Ronald
>>> McNeil
>>> Sent: Monday, March 25, 2013 8:25 PM
>>> To: montgomery_boats(a)mailman.xmission.com
>>> Subject: M_Boats: Towing with the extension out
>>>
>>> I am considering to just tow my M17 with the extension out on the trailer.
>>> The extension on my Pacific trail is not all that long, while extended there
>>> is about 4-5 feet of overlap with two pins holding it.
>>>
>>> I tow it about 15 miles back and forth to the lake, no highway but speeds up
>>> to 55mph.
>>> I know there are ways to set it up to easily extended it without taking it
>>> off the hitch but I have not gotten around to that yet.
>>>
>>> Does anyone think this would be unsafe or not recommended for some reason?
>>>
>>>
>>> Thanks,
>>> Ron McNeil
>>> Jackpot
>>
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date: 03/26/13
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 26 Mar 2013 20:11:50 -0400
> From: John Tyner <tynerjr(a)md.metrocast.net>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Lifting the M-15
> Message-ID: <51523946.6010106(a)md.metrocast.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hey! That's my boat! (Now, anyway, I bought it from John Harris (of
> Chesapeake Light Craft) in 2003.)
> ----
> John Tyner
> M-15 #412 "Chimpanzee"
>
> On 3/26/2013 6:22 PM, W David Scobie wrote:
>> lifting an M15 example using a method related to Jerry's comments on how strong the chainplates and stern cleats are. in this case the 'lifter' is a forklift -
>>
>> http://msogphotosite.com/MSOG/b15cbrep/b15cbrep1.jpg
>>
>> the description of the above here -
>>
>> http://msogphotosite.com/M15CBRepl.html
>>
>> (you can click the spaces where the images are suppose to be ... still working on updating the site).
>>
>>
>> here is another way -
>>
>> http://msogphotosite.com/m15garage.html
>>
>> (you can click the spaces where the images are suppose to be ... still working on updating the site).
>>
>>
>> and another -
>>
>> http://msogphotosite.com/15breezecb.html
>>
>> (you can click the spaces where the images are suppose to be ... still working on updating the site).
>>
>>
>> if 'smiley' sees these posts he can comment on the lifting bridle he and a boatyard created. i've seen pictures and it is a VERY nice setup.
>>
>>
>> :: Dave Scobie
>>
>> --- On Tue, 3/26/13, Robert Hall <bert.hall(a)rogers.com> wrote:
>>
>>>
>>> Hello All, Somewhere in the
>>> literature on the net I have seen illustrated instructions
>>> on how to raise a Monty 15 off its trailer and remove the
>>> trailer while lowering the boat onto supports so work can be
>>> done on the bottom/keel. To date my search has failed to
>>> locate any information of use.Do any of my fellow M-15
>>> owners have any advice? Thanks. RTH.
>
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 26 Mar 2013 17:20:28 -0700
> From: "stevetrapp" <stevetrapp(a)q.com>
> To: "For and about Montgomery Sailboats"
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Towing with the extension out
> Message-ID: <5C1E20B4FC8C4BDFB48E03316CCFA7CE@STEVEEW>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Gary,
> Amazing. Particularly towing it with your Subaru Forester. I have a 2001 Subaru Forester that groans to get my M-15 up the hill from Conkling Park.
> Steve
>
> ----- Original Message -----
> From: "GARY M HYDE" <gmhyde1(a)mac.com>
> To: "For and about Montgomery Sailboats" <montgomery_boats(a)mailman.xmission.com>
> Sent: Tuesday, March 26, 2013 4:52 PM
> Subject: Re: M_Boats: Towing with the extension out
>
>
> Steve :
> I've towed the M17 about 10,000 miles including from California, to & from Lake Havasu, 5 times from Pullman to Western WA and back, and many shorter trips, all with a 2004 Subaru Forester Turbo, rated at 2400 pound towing capacity. I also adjusted the trailer axle position to produce a 200 pound tongue weight (about 10% of trailer weight).
> I also have Trailer brakes, wouldn't leave home without em.
> Also, I tow usually with the tongue at mid extension as mentioned before. That is NOT the maximum extension sometimes used for launching.
>
> ~~~_/)~~~ Gary
> Sent from my iPhone :-)
>
> On Mar 26, 2013, at 12:06 PM, stevetrapp <stevetrapp(a)q.com> wrote:
>
>> Gary,
>> I am sure that you know this from experience of driving on the winding country roads that surround your sailing area on Lake Couer D' Alene. Do you tow you M-boat home or into town for winter, or store it there at the boat yard?
>> Steve
>>
>> ----- Original Message -----
>> From: "GARY M HYDE" <gmhyde1(a)mac.com>
>> To: "For and about Montgomery Sailboats" <montgomery_boats(a)mailman.xmission.com>
>> Sent: Tuesday, March 26, 2013 2:33 PM
>> Subject: Re: M_Boats: Towing with the extension out
>>
>>
>> Actually the sway is less with the long tongue because the car has better leverage on the trailer.
>>
>> ~~~_/)~~~ Gary
>> Sent from my iPhone :-)
>>
>> On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo" <griemmolo2(a)gmail.com> wrote:
>>
>>> My concern would be that the pivot point (ball hitch) is an increased
>>> distance from the weight (boat) any sway would be greater than normal ("Give
>>> me a lever long enough and I can move the earth") and could cause the auto
>>> to be affected.
>>>
>>> George
>>>
>>> -----Original Message-----
>>> From: montgomery_boats-bounces(a)mailman.xmission.com
>>> [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Ronald
>>> McNeil
>>> Sent: Monday, March 25, 2013 8:25 PM
>>> To: montgomery_boats(a)mailman.xmission.com
>>> Subject: M_Boats: Towing with the extension out
>>>
>>> I am considering to just tow my M17 with the extension out on the trailer.
>>> The extension on my Pacific trail is not all that long, while extended there
>>> is about 4-5 feet of overlap with two pins holding it.
>>>
>>> I tow it about 15 miles back and forth to the lake, no highway but speeds up
>>> to 55mph.
>>> I know there are ways to set it up to easily extended it without taking it
>>> off the hitch but I have not gotten around to that yet.
>>>
>>> Does anyone think this would be unsafe or not recommended for some reason?
>>>
>>>
>>> Thanks,
>>> Ron McNeil
>>> Jackpot
>>
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date: 03/26/13
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date: 03/26/13
>
>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 26 Mar 2013 15:06:07 -1000
> From: GARY M HYDE <gmhyde1(a)mac.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Towing with the extension out
> Message-ID: <FCD3280D-39B0-45CE-9D55-EB7E5747A8EB(a)mac.com>
> Content-Type: text/plain; charset=us-ascii
>
> The turbocharger is the difference, along with the trailer brakes.
>
> ~~~_/)~~~ Gary
> Sent from my iPhone :-)
>
> On Mar 26, 2013, at 2:20 PM, stevetrapp <stevetrapp(a)q.com> wrote:
>
>> Gary,
>> Amazing. Particularly towing it with your Subaru Forester. I have a 2001 Subaru Forester that groans to get my M-15 up the hill from Conkling Park.
>> Steve
>>
>> ----- Original Message -----
>> From: "GARY M HYDE" <gmhyde1(a)mac.com>
>> To: "For and about Montgomery Sailboats" <montgomery_boats(a)mailman.xmission.com>
>> Sent: Tuesday, March 26, 2013 4:52 PM
>> Subject: Re: M_Boats: Towing with the extension out
>>
>>
>> Steve :
>> I've towed the M17 about 10,000 miles including from California, to & from Lake Havasu, 5 times from Pullman to Western WA and back, and many shorter trips, all with a 2004 Subaru Forester Turbo, rated at 2400 pound towing capacity. I also adjusted the trailer axle position to produce a 200 pound tongue weight (about 10% of trailer weight).
>> I also have Trailer brakes, wouldn't leave home without em.
>> Also, I tow usually with the tongue at mid extension as mentioned before. That is NOT the maximum extension sometimes used for launching.
>>
>> ~~~_/)~~~ Gary
>> Sent from my iPhone :-)
>>
>> On Mar 26, 2013, at 12:06 PM, stevetrapp <stevetrapp(a)q.com> wrote:
>>
>>> Gary,
>>> I am sure that you know this from experience of driving on the winding country roads that surround your sailing area on Lake Couer D' Alene. Do you tow you M-boat home or into town for winter, or store it there at the boat yard?
>>> Steve
>>>
>>> ----- Original Message -----
>>> From: "GARY M HYDE" <gmhyde1(a)mac.com>
>>> To: "For and about Montgomery Sailboats" <montgomery_boats(a)mailman.xmission.com>
>>> Sent: Tuesday, March 26, 2013 2:33 PM
>>> Subject: Re: M_Boats: Towing with the extension out
>>>
>>>
>>> Actually the sway is less with the long tongue because the car has better leverage on the trailer.
>>>
>>> ~~~_/)~~~ Gary
>>> Sent from my iPhone :-)
>>>
>>> On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo" <griemmolo2(a)gmail.com> wrote:
>>>
>>>> My concern would be that the pivot point (ball hitch) is an increased
>>>> distance from the weight (boat) any sway would be greater than normal ("Give
>>>> me a lever long enough and I can move the earth") and could cause the auto
>>>> to be affected.
>>>>
>>>> George
>>>>
>>>> -----Original Message-----
>>>> From: montgomery_boats-bounces(a)mailman.xmission.com
>>>> [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Ronald
>>>> McNeil
>>>> Sent: Monday, March 25, 2013 8:25 PM
>>>> To: montgomery_boats(a)mailman.xmission.com
>>>> Subject: M_Boats: Towing with the extension out
>>>>
>>>> I am considering to just tow my M17 with the extension out on the trailer.
>>>> The extension on my Pacific trail is not all that long, while extended there
>>>> is about 4-5 feet of overlap with two pins holding it.
>>>>
>>>> I tow it about 15 miles back and forth to the lake, no highway but speeds up
>>>> to 55mph.
>>>> I know there are ways to set it up to easily extended it without taking it
>>>> off the hitch but I have not gotten around to that yet.
>>>>
>>>> Does anyone think this would be unsafe or not recommended for some reason?
>>>>
>>>>
>>>> Thanks,
>>>> Ron McNeil
>>>> Jackpot
>>>
>>>
>>>
>>> -----
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date: 03/26/13
>>
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date: 03/26/13
>
>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 26 Mar 2013 18:10:33 -0700
> From: Tom Smith <openboatt(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Towing with the extension out
> Message-ID:
> <CA+3pONL_JENXpkAnGrL9h7jCnrRWnfmU_y5gFOGrBQaqvp5fuQ(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Aloha Gary!! t
>
> On Tue, Mar 26, 2013 at 4:39 PM, GARY M HYDE <gmhyde1(a)mac.com> wrote:
>
>> Tom:
>> Once an engineer, always an engineer.
>> Aloha!
>>
>> ~~~_/)~~~ Gary
>> Sent from my iPhone :-)
>>
>> On Mar 26, 2013, at 12:13 PM, Tom Smith <openboatt(a)gmail.com> wrote:
>>
>>> Gary 'bookworm' Hyde... :-) t
>>>
>>> On Tue, Mar 26, 2013 at 2:33 PM, GARY M HYDE <gmhyde1(a)mac.com> wrote:
>>>
>>>> Actually the sway is less with the long tongue because the car has
>> better
>>>> leverage on the trailer.
>>>>
>>>> ~~~_/)~~~ Gary
>>>> Sent from my iPhone :-)
>>>>
>>>> On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo" <griemmolo2(a)gmail.com>
>>>> wrote:
>>>>
>>>>> My concern would be that the pivot point (ball hitch) is an increased
>>>>> distance from the weight (boat) any sway would be greater than normal
>>>> ("Give
>>>>> me a lever long enough and I can move the earth") and could cause the
>>>> auto
>>>>> to be affected.
>>>>>
>>>>> George
>>>>>
>>>>> -----Original Message-----
>>>>> From: montgomery_boats-bounces(a)mailman.xmission.com
>>>>> [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of
>>>> Ronald
>>>>> McNeil
>>>>> Sent: Monday, March 25, 2013 8:25 PM
>>>>> To: montgomery_boats(a)mailman.xmission.com
>>>>> Subject: M_Boats: Towing with the extension out
>>>>>
>>>>> I am considering to just tow my M17 with the extension out on the
>>>> trailer.
>>>>> The extension on my Pacific trail is not all that long, while extended
>>>> there
>>>>> is about 4-5 feet of overlap with two pins holding it.
>>>>>
>>>>> I tow it about 15 miles back and forth to the lake, no highway but
>>>> speeds up
>>>>> to 55mph.
>>>>> I know there are ways to set it up to easily extended it without taking
>>>> it
>>>>> off the hitch but I have not gotten around to that yet.
>>>>>
>>>>> Does anyone think this would be unsafe or not recommended for some
>>>> reason?
>>>>>
>>>>>
>>>>> Thanks,
>>>>> Ron McNeil
>>>>> Jackpot
>
>
> ------------------------------
>
> Message: 6
> Date: Wed, 27 Mar 2013 10:07:15 -0400
> From: "Robert Hall" <bert.hall(a)rogers.com>
> To: "For and about Montgomery Sailboats"
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Lifting the M-15
> Message-ID: <97685DE21DBE418C9E425DEBF3AF049D@Pavilion>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> Hi David, That material you sent is exactly what I need. Many thanks. RTH.
>
> -----Original Message-----
> From: W David Scobie
> Sent: Tuesday, March 26, 2013 6:22 PM
> To: For and about Montgomery Sailboats
> Subject: Re: M_Boats: Lifting the M-15
>
> lifting an M15 example using a method related to Jerry's comments on how
> strong the chainplates and stern cleats are. in this case the 'lifter' is a
> forklift -
>
> http://msogphotosite.com/MSOG/b15cbrep/b15cbrep1.jpg
>
> the description of the above here -
>
> http://msogphotosite.com/M15CBRepl.html
>
> (you can click the spaces where the images are suppose to be ... still
> working on updating the site).
>
>
> here is another way -
>
> http://msogphotosite.com/m15garage.html
>
> (you can click the spaces where the images are suppose to be ... still
> working on updating the site).
>
>
> and another -
>
> http://msogphotosite.com/15breezecb.html
>
> (you can click the spaces where the images are suppose to be ... still
> working on updating the site).
>
>
> if 'smiley' sees these posts he can comment on the lifting bridle he and a
> boatyard created. i've seen pictures and it is a VERY nice setup.
>
>
> :: Dave Scobie
>
> --- On Tue, 3/26/13, Robert Hall <bert.hall(a)rogers.com> wrote:
>
>>
>> Hello All, Somewhere in the
>> literature on the net I have seen illustrated instructions
>> on how to raise a Monty 15 off its trailer and remove the
>> trailer while lowering the boat onto supports so work can be
>> done on the bottom/keel. To date my search has failed to
>> locate any information of use.Do any of my fellow M-15
>> owners have any advice? Thanks. RTH.
>
>
>
>
> ------------------------------
>
> Message: 7
> Date: Wed, 27 Mar 2013 17:38:19 -0400
> From: Bill Wickett <billwick(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: M_Boats: Iron centreboard on M17
> Message-ID:
> <CAFd5cDm=WDVkm2vELVpsxe8FftH06CZwERjj7EJ_1exKc=8e=Q(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Who can advise the year that the CB was changed from iron to laminate?
> Which CB would an '89 M17 be likely to have? Would the ballast be iron or
> lead?
>
> Thanks,
>
> Bill Wickett
> Makin' Time M17 #622
>
>
> ------------------------------
>
> Message: 8
> Date: Wed, 27 Mar 2013 14:50:27 -0700
> From: "jerry montgomery" <jerry(a)jerrymontgomery.org>
> To: "For and about Montgomery Sailboats"
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Iron centreboard on M17
> Message-ID: <D73F15ADF31D4E40B0E04D88BF811D37@jerryws10>
> Content-Type: text/plain; format="flowed"; charset="iso-8859-1";
> reply-type="original"
>
> That was about the time when I switched from steel punchings to lead shot in
> the ballast; I'd guess that your boat has lead ballast but the old iron
> board. You can check the ballast by running a compass or magnet over the
> keel, and the board by crawling under and looking.
>
> jerry
> ----- Original Message -----
> From: "Bill Wickett" <billwick(a)gmail.com>
> To: "For and about Montgomery Sailboats"
> <montgomery_boats(a)mailman.xmission.com>
> Sent: Wednesday, March 27, 2013 2:38 PM
> Subject: M_Boats: Iron centreboard on M17
>
>
>> Who can advise the year that the CB was changed from iron to laminate?
>> Which CB would an '89 M17 be likely to have? Would the ballast be iron or
>> lead?
>>
>> Thanks,
>>
>> Bill Wickett
>> Makin' Time M17 #622
>
>
> --
> I am using the free version of SPAMfighter.
> SPAMfighter has removed 8193 of my spam emails to date.
> Get the free SPAMfighter here: http://www.spamfighter.com/len
>
> Do you have a slow PC? Try a Free scan http://www.spamfighter.com/SLOW-PCfighter?cid=sigen
>
>
>
>
>
> ------------------------------
>
> Message: 9
> Date: Wed, 27 Mar 2013 14:55:10 -0700 (PDT)
> From: W David Scobie <wdscobie(a)yahoo.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Iron centreboard on M17
> Message-ID:
> <1364421310.65307.YahooMailClassic(a)web121702.mail.ne1.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Bill:
>
> from information shared by Randy G. -
>
> In 1988 (roughly at hull #400) the centerboard was changed from 220 lbs cast iron to the same centerboard as is used in the M15, weighing 40 lbs. The M15 is comprised of a fiberglass-lead-fiberglass sandwich and does not require a winch to raise and lower. Also, the ballast was increased to compensate for the change in centerboard weight, and the ballast was changed from steel punching to lead. These changes took places over several boats. For example; our [Randy's] 1988 M17 #410 has the fiberglass centerboard but steel punching ballast.
>
> (can't remember where i got this specifically ... what i have is credited to Randy.)
>
>
> :: Dave Scobie
>
>
> --- On Wed, 3/27/13, Bill Wickett <billwick(a)gmail.com> wrote:
>
>>
>> Who can advise the year that the CB
>> was changed from iron to laminate?
>> Which CB would an '89 M17 be likely to have? Would the
>> ballast be iron or
>> lead?
>>
>> Thanks,
>>
>> Bill Wickett
>> Makin' Time M17? #622
>
>
>
> ------------------------------
>
> Message: 10
> Date: Wed, 27 Mar 2013 17:57:50 -0400
> From: Bill Wickett <billwick(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Iron centreboard on M17
> Message-ID:
> <CAFd5cD=WEn1_Gox2K7_FNXi_F0=6Dpes_QuQtK=She8j2XVAcQ(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Thank you Jerry
>
> On Wed, Mar 27, 2013 at 5:50 PM, jerry montgomery <jerry(a)jerrymontgomery.org
>> wrote:
>
>> That was about the time when I switched from steel punchings to lead shot
>> in the ballast; I'd guess that your boat has lead ballast but the old
>> iron board. You can check the ballast by running a compass or magnet over
>> the keel, and the board by crawling under and looking.
>>
>> jerry
>> ----- Original Message ----- From: "Bill Wickett" <billwick(a)gmail.com>
>> To: "For and about Montgomery Sailboats" <montgomery_boats(a)mailman.**
>> xmission.com <montgomery_boats(a)mailman.xmission.com>>
>> Sent: Wednesday, March 27, 2013 2:38 PM
>> Subject: M_Boats: Iron centreboard on M17
>>
>>
>>
>> Who can advise the year that the CB was changed from iron to laminate?
>>> Which CB would an '89 M17 be likely to have? Would the ballast be iron or
>>> lead?
>>>
>>> Thanks,
>>>
>>> Bill Wickett
>>> Makin' Time M17 #622
>>
>> --
>> I am using the free version of SPAMfighter.
>> SPAMfighter has removed 8193 of my spam emails to date.
>> Get the free SPAMfighter here: http://www.spamfighter.com/len
>>
>> Do you have a slow PC? Try a Free scan http://www.spamfighter.com/**
>> SLOW-PCfighter?cid=sigen<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>
>
>
> ------------------------------
>
> Message: 11
> Date: Wed, 27 Mar 2013 17:58:51 -0400
> From: Bill Wickett <billwick(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Iron centreboard on M17
> Message-ID:
> <CAFd5cDkzye9bja=krMQUPTammug1Nm5TSkAaZG6M6CvhgZmJRQ(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Appreciate the info Dave. Will take a magnet with me when I look at her.
>
> Bill
>
> On Wed, Mar 27, 2013 at 5:55 PM, W David Scobie <wdscobie(a)yahoo.com> wrote:
>
>> Bill:
>>
>> from information shared by Randy G. -
>>
>> In 1988 (roughly at hull #400) the centerboard was changed from 220 lbs
>> cast iron to the same centerboard as is used in the M15, weighing 40 lbs.
>> The M15 is comprised of a fiberglass-lead-fiberglass sandwich and does not
>> require a winch to raise and lower. Also, the ballast was increased to
>> compensate for the change in centerboard weight, and the ballast was
>> changed from steel punching to lead. These changes took places over several
>> boats. For example; our [Randy's] 1988 M17 #410 has the fiberglass
>> centerboard but steel punching ballast.
>>
>> (can't remember where i got this specifically ... what i have is credited
>> to Randy.)
>>
>>
>> :: Dave Scobie
>>
>>
>> --- On Wed, 3/27/13, Bill Wickett <billwick(a)gmail.com> wrote:
>>
>>>
>>> Who can advise the year that the CB
>>> was changed from iron to laminate?
>>> Which CB would an '89 M17 be likely to have? Would the
>>> ballast be iron or
>>> lead?
>>>
>>> Thanks,
>>>
>>> Bill Wickett
>>> Makin' Time M17 #622
>
>
> ------------------------------
>
> Message: 12
> Date: Wed, 27 Mar 2013 17:16:58 -0700
> From: "R.K. Graves" <rkgraves(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Iron centreboard on M17
> Message-ID:
> <CADyq_zxE=RhQO88CPgAaZ4UxdCoX62fuPvO+D3xs37DAGbJ8ag(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Bill,
>
> The CB change for cast iron to laminated fiberglass/lead occurred around
> hull number 400, roughly early 1988. I have 1988 hull #407 and it has
> the fiberglass/lead CB but steel punchings for ballast. As far as I know
> all the non-cast iron CB's are fiberglass/lead. I believe the same
> fiberglass/lead CB is used on both the 15 and the 17. The change from steel
> punching to lead ballast occurred sometime after hull #407. The best way to
> tell which type of ballast a 17 has is to see if a large magnet is
> attracted to the keel (takes a pretty good size magnet for the test).
>
> Randy Graves
>
> On Wed, Mar 27, 2013 at 2:38 PM, Bill Wickett <billwick(a)gmail.com> wrote:
>
>> Who can advise the year that the CB was changed from iron to laminate?
>> Which CB would an '89 M17 be likely to have? Would the ballast be iron or
>> lead?
>>
>> Thanks,
>>
>> Bill Wickett
>> Makin' Time M17 #622
>
>
> ------------------------------
>
> Message: 13
> Date: Fri, 29 Mar 2013 09:48:08 -0500
> From: "George R. Iemmolo" <griemmolo2(a)gmail.com>
> To: <montgomery_boats(a)mailman.xmission.com>
> Subject: M_Boats: Flotation
> Message-ID: <DFFF3D5AD99F41C89CDFE154853B17C0@GeorgeHPDV9500>
> Content-Type: text/plain; charset="us-ascii"
>
> I have started to work on my recent acquisition that has been sitting for
> some years unused and in need of some TLC. I find a large amount of
> Styrofoam block beneath the deck. Is this normal?
>
>
>
> George
>
> 96 M15 #602
>
> NoNameYet
>
>
>
> ------------------------------
>
> Message: 14
> Date: Fri, 29 Mar 2013 07:57:16 -0700
> From: Tom Smith <openboatt(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Flotation
> Message-ID:
> <CA+3pONJomet_yD-LHJYd67oGkbbSzd2_9Y48gScUSsi0BNuQOw(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Yes, it's normal. t
>
>
> On Fri, Mar 29, 2013 at 7:48 AM, George R. Iemmolo <griemmolo2(a)gmail.com>wrote:
>
>> I have started to work on my recent acquisition that has been sitting for
>> some years unused and in need of some TLC. I find a large amount of
>> Styrofoam block beneath the deck. Is this normal?
>>
>>
>>
>> George
>>
>> 96 M15 #602
>>
>> NoNameYet
>
>
> ------------------------------
>
> Message: 15
> Date: Fri, 29 Mar 2013 11:01:18 -0400
> From: Conbert Benneck <chbenneck(a)sbcglobal.net>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Flotation
> Message-ID: <5155ACBE.7040007(a)sbcglobal.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> On 29-Mar-13 10:48 AM, George R. Iemmolo wrote:
>
> Hi George,
>
> Yes, it's normal.
>
> You'll find styrofoam blocks up in the bow compartment, if you remove
> the screws holding the cover in place.
>
> You'll also find it under the cockpit sole, in the bilge.
>
> Connie
>
> ex M15 #400 LEPPO
>
>
>> I have started to work on my recent acquisition that has been sitting for
>> some years unused and in need of some TLC. I find a large amount of
>> Styrofoam block beneath the deck. Is this normal?
>>
>>
>>
>> George
>>
>> 96 M15 #602
>>
>> NoNameYet
>
>
>
>
> ------------------------------
>
> Message: 16
> Date: Fri, 29 Mar 2013 09:05:06 -0700 (PDT)
> From: W David Scobie <wdscobie(a)yahoo.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Flotation
> Message-ID:
> <1364573106.18922.YahooMailClassic(a)web121704.mail.ne1.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> George:
>
> to add a photo to the comments already shared that yes the M15 has positive flotation foam under forward end of the v-berth and under the cockpit floor i've attached to this email a photo showin under the v-berth (after unscrewing the locker lid).
>
>
> :: Dave Scobie
> :: former M15 owner - www.freewebs.com/m15-named-scred
>
> --- On Fri, 3/29/13, George R. Iemmolo <griemmolo2(a)gmail.com> wrote:
>
>>
>> I have started to work on my recent
>> acquisition that has been sitting for
>> some years unused and in need of some TLC. I find a large
>> amount of
>> Styrofoam block beneath the deck. Is this normal?
>>
>>
>>
>> George
>>
>> 96 M15 #602
>>
>> NoNameYet? ?
>
12
18
I was wondering how much a storm jib is worth? I've only used it once when
the winds picked up past 30 kts. Comes with the sail bag and everything.
I also have a 130% genoa. Used it once or twice in very light winds. i'd
say it has about 60% of its life left.
Quite frankly I have no idea how much these sails are worth, because i
haven't had to go shopping for sails yet.
Thanks
--
Jerry Lee
Shooter's Quest Network
Hi-Kick Racing Motorsports Blog
3
2
Please remove me from thr mailing list. rvbrown(a)suffolk.lib.ny.us
1
0
01 Apr '13
We removed the flotation from out 1986 Monty 15.
In a message dated 3/31/2013 5:39:45 P.M. Mountain Daylight Time,
sailtim(a)yahoo.com writes:
I have a Monty 15, a 2007, hull # 641. It was built by NorSea boat
builders. My beautiful boat doesn't have any added flotation at all under the
vbirth , just a huge storage space under the vbirth. Also, there is no added
flotation under the cockpit floor. There is no added positive flotation
material at all.
I talked to Mr. Eng, owner of the company. He said that the extra
floatation isn't necessary because the boat can't be knocked over. He suggested
that I put an inner tube under the cockpit floor if it bothered me. He did say
that all of the forward individual lockers are floatation.
My opinion is that if you put the weather boards in place and close the
hatch, water isn't going into the cabin.
I can only imagine how bad the cabin would smell with a new inner tube in
it. I don't think tire stores smell that great.
If it gets windy and rough, be sure to put the boards in and close the
hatch, no problem.
Tim Erwin, " Dark Star " # 641
Sent from my iPad
On Mar 29, 2013, at 11:05 AM,
montgomery_boats-request(a)mailman.xmission.com wrote:
> Send montgomery_boats mailing list submissions to
> montgomery_boats(a)mailman.xmission.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
> or, via email, send a message with subject or body 'help' to
> montgomery_boats-request(a)mailman.xmission.com
>
> You can reach the person managing the list at
> montgomery_boats-owner(a)mailman.xmission.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of montgomery_boats digest..."
>
>
> Today's Topics:
>
> 1. Re: Towing with the extension out (GARY M HYDE)
> 2. Re: Lifting the M-15 (John Tyner)
> 3. Re: Towing with the extension out (stevetrapp)
> 4. Re: Towing with the extension out (GARY M HYDE)
> 5. Re: Towing with the extension out (Tom Smith)
> 6. Re: Lifting the M-15 (Robert Hall)
> 7. Iron centreboard on M17 (Bill Wickett)
> 8. Re: Iron centreboard on M17 (jerry montgomery)
> 9. Re: Iron centreboard on M17 (W David Scobie)
> 10. Re: Iron centreboard on M17 (Bill Wickett)
> 11. Re: Iron centreboard on M17 (Bill Wickett)
> 12. Re: Iron centreboard on M17 (R.K. Graves)
> 13. Flotation (George R. Iemmolo)
> 14. Re: Flotation (Tom Smith)
> 15. Re: Flotation (Conbert Benneck)
> 16. Re: Flotation (W David Scobie)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 26 Mar 2013 13:54:06 -1000
> From: GARY M HYDE <gmhyde1(a)mac.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Towing with the extension out
> Message-ID: <16941021-5DD7-4467-9876-2416C5BAA172(a)mac.com>
> Content-Type: text/plain; charset=us-ascii
>
> Steve/
> To answer your other Q, I store indoors in winter.
>
> ~~~_/)~~~ Gary
> Sent from my iPhone :-)
>
> On Mar 26, 2013, at 12:06 PM, stevetrapp <stevetrapp(a)q.com> wrote:
>
>> Gary,
>> I am sure that you know this from experience of driving on the
winding country roads that surround your sailing area on Lake Couer D' Alene. Do
you tow you M-boat home or into town for winter, or store it there at the
boat yard?
>> Steve
>>
>> ----- Original Message -----
>> From: "GARY M HYDE" <gmhyde1(a)mac.com>
>> To: "For and about Montgomery Sailboats"
<montgomery_boats(a)mailman.xmission.com>
>> Sent: Tuesday, March 26, 2013 2:33 PM
>> Subject: Re: M_Boats: Towing with the extension out
>>
>>
>> Actually the sway is less with the long tongue because the car has
better leverage on the trailer.
>>
>> ~~~_/)~~~ Gary
>> Sent from my iPhone :-)
>>
>> On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo" <griemmolo2(a)gmail.com>
wrote:
>>
>>> My concern would be that the pivot point (ball hitch) is an increased
>>> distance from the weight (boat) any sway would be greater than normal
("Give
>>> me a lever long enough and I can move the earth") and could cause the
auto
>>> to be affected.
>>>
>>> George
>>>
>>> -----Original Message-----
>>> From: montgomery_boats-bounces(a)mailman.xmission.com
>>> [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of
Ronald
>>> McNeil
>>> Sent: Monday, March 25, 2013 8:25 PM
>>> To: montgomery_boats(a)mailman.xmission.com
>>> Subject: M_Boats: Towing with the extension out
>>>
>>> I am considering to just tow my M17 with the extension out on the
trailer.
>>> The extension on my Pacific trail is not all that long, while extended
there
>>> is about 4-5 feet of overlap with two pins holding it.
>>>
>>> I tow it about 15 miles back and forth to the lake, no highway but
speeds up
>>> to 55mph.
>>> I know there are ways to set it up to easily extended it without
taking it
>>> off the hitch but I have not gotten around to that yet.
>>>
>>> Does anyone think this would be unsafe or not recommended for some
reason?
>>>
>>>
>>> Thanks,
>>> Ron McNeil
>>> Jackpot
>>
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date:
03/26/13
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 26 Mar 2013 20:11:50 -0400
> From: John Tyner <tynerjr(a)md.metrocast.net>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Lifting the M-15
> Message-ID: <51523946.6010106(a)md.metrocast.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hey! That's my boat! (Now, anyway, I bought it from John Harris (of
> Chesapeake Light Craft) in 2003.)
> ----
> John Tyner
> M-15 #412 "Chimpanzee"
>
> On 3/26/2013 6:22 PM, W David Scobie wrote:
>> lifting an M15 example using a method related to Jerry's comments on
how strong the chainplates and stern cleats are. in this case the 'lifter' is
a forklift -
>>
>> http://msogphotosite.com/MSOG/b15cbrep/b15cbrep1.jpg
>>
>> the description of the above here -
>>
>> http://msogphotosite.com/M15CBRepl.html
>>
>> (you can click the spaces where the images are suppose to be ... still
working on updating the site).
>>
>>
>> here is another way -
>>
>> http://msogphotosite.com/m15garage.html
>>
>> (you can click the spaces where the images are suppose to be ... still
working on updating the site).
>>
>>
>> and another -
>>
>> http://msogphotosite.com/15breezecb.html
>>
>> (you can click the spaces where the images are suppose to be ... still
working on updating the site).
>>
>>
>> if 'smiley' sees these posts he can comment on the lifting bridle he
and a boatyard created. i've seen pictures and it is a VERY nice setup.
>>
>>
>> :: Dave Scobie
>>
>> --- On Tue, 3/26/13, Robert Hall <bert.hall(a)rogers.com> wrote:
>>
>>>
>>> Hello All, Somewhere in the
>>> literature on the net I have seen illustrated instructions
>>> on how to raise a Monty 15 off its trailer and remove the
>>> trailer while lowering the boat onto supports so work can be
>>> done on the bottom/keel. To date my search has failed to
>>> locate any information of use.Do any of my fellow M-15
>>> owners have any advice? Thanks. RTH.
>
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 26 Mar 2013 17:20:28 -0700
> From: "stevetrapp" <stevetrapp(a)q.com>
> To: "For and about Montgomery Sailboats"
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Towing with the extension out
> Message-ID: <5C1E20B4FC8C4BDFB48E03316CCFA7CE@STEVEEW>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Gary,
> Amazing. Particularly towing it with your Subaru Forester. I have a
2001 Subaru Forester that groans to get my M-15 up the hill from Conkling
Park.
> Steve
>
> ----- Original Message -----
> From: "GARY M HYDE" <gmhyde1(a)mac.com>
> To: "For and about Montgomery Sailboats"
<montgomery_boats(a)mailman.xmission.com>
> Sent: Tuesday, March 26, 2013 4:52 PM
> Subject: Re: M_Boats: Towing with the extension out
>
>
> Steve :
> I've towed the M17 about 10,000 miles including from California, to &
from Lake Havasu, 5 times from Pullman to Western WA and back, and many
shorter trips, all with a 2004 Subaru Forester Turbo, rated at 2400 pound towing
capacity. I also adjusted the trailer axle position to produce a 200 pound
tongue weight (about 10% of trailer weight).
> I also have Trailer brakes, wouldn't leave home without em.
> Also, I tow usually with the tongue at mid extension as mentioned
before. That is NOT the maximum extension sometimes used for launching.
>
> ~~~_/)~~~ Gary
> Sent from my iPhone :-)
>
> On Mar 26, 2013, at 12:06 PM, stevetrapp <stevetrapp(a)q.com> wrote:
>
>> Gary,
>> I am sure that you know this from experience of driving on the
winding country roads that surround your sailing area on Lake Couer D' Alene. Do
you tow you M-boat home or into town for winter, or store it there at the
boat yard?
>> Steve
>>
>> ----- Original Message -----
>> From: "GARY M HYDE" <gmhyde1(a)mac.com>
>> To: "For and about Montgomery Sailboats"
<montgomery_boats(a)mailman.xmission.com>
>> Sent: Tuesday, March 26, 2013 2:33 PM
>> Subject: Re: M_Boats: Towing with the extension out
>>
>>
>> Actually the sway is less with the long tongue because the car has
better leverage on the trailer.
>>
>> ~~~_/)~~~ Gary
>> Sent from my iPhone :-)
>>
>> On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo" <griemmolo2(a)gmail.com>
wrote:
>>
>>> My concern would be that the pivot point (ball hitch) is an increased
>>> distance from the weight (boat) any sway would be greater than normal
("Give
>>> me a lever long enough and I can move the earth") and could cause the
auto
>>> to be affected.
>>>
>>> George
>>>
>>> -----Original Message-----
>>> From: montgomery_boats-bounces(a)mailman.xmission.com
>>> [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of R
onald
>>> McNeil
>>> Sent: Monday, March 25, 2013 8:25 PM
>>> To: montgomery_boats(a)mailman.xmission.com
>>> Subject: M_Boats: Towing with the extension out
>>>
>>> I am considering to just tow my M17 with the extension out on the
trailer.
>>> The extension on my Pacific trail is not all that long, while extended
there
>>> is about 4-5 feet of overlap with two pins holding it.
>>>
>>> I tow it about 15 miles back and forth to the lake, no highway but
speeds up
>>> to 55mph.
>>> I know there are ways to set it up to easily extended it without
taking it
>>> off the hitch but I have not gotten around to that yet.
>>>
>>> Does anyone think this would be unsafe or not recommended for some
reason?
>>>
>>>
>>> Thanks,
>>> Ron McNeil
>>> Jackpot
>>
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date:
03/26/13
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date:
03/26/13
>
>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 26 Mar 2013 15:06:07 -1000
> From: GARY M HYDE <gmhyde1(a)mac.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Towing with the extension out
> Message-ID: <FCD3280D-39B0-45CE-9D55-EB7E5747A8EB(a)mac.com>
> Content-Type: text/plain; charset=us-ascii
>
> The turbocharger is the difference, along with the trailer brakes.
>
> ~~~_/)~~~ Gary
> Sent from my iPhone :-)
>
> On Mar 26, 2013, at 2:20 PM, stevetrapp <stevetrapp(a)q.com> wrote:
>
>> Gary,
>> Amazing. Particularly towing it with your Subaru Forester. I have a
2001 Subaru Forester that groans to get my M-15 up the hill from Conkling
Park.
>> Steve
>>
>> ----- Original Message -----
>> From: "GARY M HYDE" <gmhyde1(a)mac.com>
>> To: "For and about Montgomery Sailboats"
<montgomery_boats(a)mailman.xmission.com>
>> Sent: Tuesday, March 26, 2013 4:52 PM
>> Subject: Re: M_Boats: Towing with the extension out
>>
>>
>> Steve :
>> I've towed the M17 about 10,000 miles including from California, to &
from Lake Havasu, 5 times from Pullman to Western WA and back, and many
shorter trips, all with a 2004 Subaru Forester Turbo, rated at 2400 pound
towing capacity. I also adjusted the trailer axle position to produce a 200
pound tongue weight (about 10% of trailer weight).
>> I also have Trailer brakes, wouldn't leave home without em.
>> Also, I tow usually with the tongue at mid extension as mentioned
before. That is NOT the maximum extension sometimes used for launching.
>>
>> ~~~_/)~~~ Gary
>> Sent from my iPhone :-)
>>
>> On Mar 26, 2013, at 12:06 PM, stevetrapp <stevetrapp(a)q.com> wrote:
>>
>>> Gary,
>>> I am sure that you know this from experience of driving on the
winding country roads that surround your sailing area on Lake Couer D' Alene. Do
you tow you M-boat home or into town for winter, or store it there at the
boat yard?
>>> Steve
>>>
>>> ----- Original Message -----
>>> From: "GARY M HYDE" <gmhyde1(a)mac.com>
>>> To: "For and about Montgomery Sailboats"
<montgomery_boats(a)mailman.xmission.com>
>>> Sent: Tuesday, March 26, 2013 2:33 PM
>>> Subject: Re: M_Boats: Towing with the extension out
>>>
>>>
>>> Actually the sway is less with the long tongue because the car has
better leverage on the trailer.
>>>
>>> ~~~_/)~~~ Gary
>>> Sent from my iPhone :-)
>>>
>>> On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo"
<griemmolo2(a)gmail.com> wrote:
>>>
>>>> My concern would be that the pivot point (ball hitch) is an increased
>>>> distance from the weight (boat) any sway would be greater than normal
("Give
>>>> me a lever long enough and I can move the earth") and could cause the
auto
>>>> to be affected.
>>>>
>>>> George
>>>>
>>>> -----Original Message-----
>>>> From: montgomery_boats-bounces(a)mailman.xmission.com
>>>> [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of
Ronald
>>>> McNeil
>>>> Sent: Monday, March 25, 2013 8:25 PM
>>>> To: montgomery_boats(a)mailman.xmission.com
>>>> Subject: M_Boats: Towing with the extension out
>>>>
>>>> I am considering to just tow my M17 with the extension out on the
trailer.
>>>> The extension on my Pacific trail is not all that long, while
extended there
>>>> is about 4-5 feet of overlap with two pins holding it.
>>>>
>>>> I tow it about 15 miles back and forth to the lake, no highway but
speeds up
>>>> to 55mph.
>>>> I know there are ways to set it up to easily extended it without
taking it
>>>> off the hitch but I have not gotten around to that yet.
>>>>
>>>> Does anyone think this would be unsafe or not recommended for some
reason?
>>>>
>>>>
>>>> Thanks,
>>>> Ron McNeil
>>>> Jackpot
>>>
>>>
>>>
>>> -----
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date:
03/26/13
>>
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date:
03/26/13
>
>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 26 Mar 2013 18:10:33 -0700
> From: Tom Smith <openboatt(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Towing with the extension out
> Message-ID:
> <CA+3pONL_JENXpkAnGrL9h7jCnrRWnfmU_y5gFOGrBQaqvp5fuQ(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Aloha Gary!! t
>
> On Tue, Mar 26, 2013 at 4:39 PM, GARY M HYDE <gmhyde1(a)mac.com> wrote:
>
>> Tom:
>> Once an engineer, always an engineer.
>> Aloha!
>>
>> ~~~_/)~~~ Gary
>> Sent from my iPhone :-)
>>
>> On Mar 26, 2013, at 12:13 PM, Tom Smith <openboatt(a)gmail.com> wrote:
>>
>>> Gary 'bookworm' Hyde... :-) t
>>>
>>> On Tue, Mar 26, 2013 at 2:33 PM, GARY M HYDE <gmhyde1(a)mac.com> wrote:
>>>
>>>> Actually the sway is less with the long tongue because the car has
>> better
>>>> leverage on the trailer.
>>>>
>>>> ~~~_/)~~~ Gary
>>>> Sent from my iPhone :-)
>>>>
>>>> On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo"
<griemmolo2(a)gmail.com>
>>>> wrote:
>>>>
>>>>> My concern would be that the pivot point (ball hitch) is an increased
>>>>> distance from the weight (boat) any sway would be greater than normal
>>>> ("Give
>>>>> me a lever long enough and I can move the earth") and could cause the
>>>> auto
>>>>> to be affected.
>>>>>
>>>>> George
>>>>>
>>>>> -----Original Message-----
>>>>> From: montgomery_boats-bounces(a)mailman.xmission.com
>>>>> [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of
>>>> Ronald
>>>>> McNeil
>>>>> Sent: Monday, March 25, 2013 8:25 PM
>>>>> To: montgomery_boats(a)mailman.xmission.com
>>>>> Subject: M_Boats: Towing with the extension out
>>>>>
>>>>> I am considering to just tow my M17 with the extension out on the
>>>> trailer.
>>>>> The extension on my Pacific trail is not all that long, while
extended
>>>> there
>>>>> is about 4-5 feet of overlap with two pins holding it.
>>>>>
>>>>> I tow it about 15 miles back and forth to the lake, no highway but
>>>> speeds up
>>>>> to 55mph.
>>>>> I know there are ways to set it up to easily extended it without
taking
>>>> it
>>>>> off the hitch but I have not gotten around to that yet.
>>>>>
>>>>> Does anyone think this would be unsafe or not recommended for some
>>>> reason?
>>>>>
>>>>>
>>>>> Thanks,
>>>>> Ron McNeil
>>>>> Jackpot
>
>
> ------------------------------
>
> Message: 6
> Date: Wed, 27 Mar 2013 10:07:15 -0400
> From: "Robert Hall" <bert.hall(a)rogers.com>
> To: "For and about Montgomery Sailboats"
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Lifting the M-15
> Message-ID: <97685DE21DBE418C9E425DEBF3AF049D@Pavilion>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> Hi David, That material you sent is exactly what I need. Many thanks.
RTH.
>
> -----Original Message-----
> From: W David Scobie
> Sent: Tuesday, March 26, 2013 6:22 PM
> To: For and about Montgomery Sailboats
> Subject: Re: M_Boats: Lifting the M-15
>
> lifting an M15 example using a method related to Jerry's comments on how
> strong the chainplates and stern cleats are. in this case the 'lifter'
is a
> forklift -
>
> http://msogphotosite.com/MSOG/b15cbrep/b15cbrep1.jpg
>
> the description of the above here -
>
> http://msogphotosite.com/M15CBRepl.html
>
> (you can click the spaces where the images are suppose to be ... still
> working on updating the site).
>
>
> here is another way -
>
> http://msogphotosite.com/m15garage.html
>
> (you can click the spaces where the images are suppose to be ... still
> working on updating the site).
>
>
> and another -
>
> http://msogphotosite.com/15breezecb.html
>
> (you can click the spaces where the images are suppose to be ... still
> working on updating the site).
>
>
> if 'smiley' sees these posts he can comment on the lifting bridle he and
a
> boatyard created. i've seen pictures and it is a VERY nice setup.
>
>
> :: Dave Scobie
>
> --- On Tue, 3/26/13, Robert Hall <bert.hall(a)rogers.com> wrote:
>
>>
>> Hello All, Somewhere in the
>> literature on the net I have seen illustrated instructions
>> on how to raise a Monty 15 off its trailer and remove the
>> trailer while lowering the boat onto supports so work can be
>> done on the bottom/keel. To date my search has failed to
>> locate any information of use.Do any of my fellow M-15
>> owners have any advice? Thanks. RTH.
>
>
>
>
> ------------------------------
>
> Message: 7
> Date: Wed, 27 Mar 2013 17:38:19 -0400
> From: Bill Wickett <billwick(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: M_Boats: Iron centreboard on M17
> Message-ID:
> <CAFd5cDm=WDVkm2vELVpsxe8FftH06CZwERjj7EJ_1exKc=8e=Q(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Who can advise the year that the CB was changed from iron to laminate?
> Which CB would an '89 M17 be likely to have? Would the ballast be iron or
> lead?
>
> Thanks,
>
> Bill Wickett
> Makin' Time M17 #622
>
>
> ------------------------------
>
> Message: 8
> Date: Wed, 27 Mar 2013 14:50:27 -0700
> From: "jerry montgomery" <jerry(a)jerrymontgomery.org>
> To: "For and about Montgomery Sailboats"
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Iron centreboard on M17
> Message-ID: <D73F15ADF31D4E40B0E04D88BF811D37@jerryws10>
> Content-Type: text/plain; format="flowed"; charset="iso-8859-1";
> reply-type="original"
>
> That was about the time when I switched from steel punchings to lead
shot in
> the ballast; I'd guess that your boat has lead ballast but the old
iron
> board. You can check the ballast by running a compass or magnet over
the
> keel, and the board by crawling under and looking.
>
> jerry
> ----- Original Message -----
> From: "Bill Wickett" <billwick(a)gmail.com>
> To: "For and about Montgomery Sailboats"
> <montgomery_boats(a)mailman.xmission.com>
> Sent: Wednesday, March 27, 2013 2:38 PM
> Subject: M_Boats: Iron centreboard on M17
>
>
>> Who can advise the year that the CB was changed from iron to laminate?
>> Which CB would an '89 M17 be likely to have? Would the ballast be iron
or
>> lead?
>>
>> Thanks,
>>
>> Bill Wickett
>> Makin' Time M17 #622
>
>
> --
> I am using the free version of SPAMfighter.
> SPAMfighter has removed 8193 of my spam emails to date.
> Get the free SPAMfighter here: http://www.spamfighter.com/len
>
> Do you have a slow PC? Try a Free scan
http://www.spamfighter.com/SLOW-PCfighter?cid=sigen
>
>
>
>
>
> ------------------------------
>
> Message: 9
> Date: Wed, 27 Mar 2013 14:55:10 -0700 (PDT)
> From: W David Scobie <wdscobie(a)yahoo.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Iron centreboard on M17
> Message-ID:
> <1364421310.65307.YahooMailClassic(a)web121702.mail.ne1.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Bill:
>
> from information shared by Randy G. -
>
> In 1988 (roughly at hull #400) the centerboard was changed from 220 lbs
cast iron to the same centerboard as is used in the M15, weighing 40 lbs.
The M15 is comprised of a fiberglass-lead-fiberglass sandwich and does not
require a winch to raise and lower. Also, the ballast was increased to
compensate for the change in centerboard weight, and the ballast was changed
from steel punching to lead. These changes took places over several boats. For
example; our [Randy's] 1988 M17 #410 has the fiberglass centerboard but
steel punching ballast.
>
> (can't remember where i got this specifically ... what i have is
credited to Randy.)
>
>
> :: Dave Scobie
>
>
> --- On Wed, 3/27/13, Bill Wickett <billwick(a)gmail.com> wrote:
>
>>
>> Who can advise the year that the CB
>> was changed from iron to laminate?
>> Which CB would an '89 M17 be likely to have? Would the
>> ballast be iron or
>> lead?
>>
>> Thanks,
>>
>> Bill Wickett
>> Makin' Time M17? #622
>
>
>
> ------------------------------
>
> Message: 10
> Date: Wed, 27 Mar 2013 17:57:50 -0400
> From: Bill Wickett <billwick(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Iron centreboard on M17
> Message-ID:
> <CAFd5cD=WEn1_Gox2K7_FNXi_F0=6Dpes_QuQtK=She8j2XVAcQ(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Thank you Jerry
>
> On Wed, Mar 27, 2013 at 5:50 PM, jerry montgomery
<jerry(a)jerrymontgomery.org
>> wrote:
>
>> That was about the time when I switched from steel punchings to lead
shot
>> in the ballast; I'd guess that your boat has lead ballast but the old
>> iron board. You can check the ballast by running a compass or magnet
over
>> the keel, and the board by crawling under and looking.
>>
>> jerry
>> ----- Original Message ----- From: "Bill Wickett" <billwick(a)gmail.com>
>> To: "For and about Montgomery Sailboats" <montgomery_boats(a)mailman.**
>> xmission.com <montgomery_boats(a)mailman.xmission.com>>
>> Sent: Wednesday, March 27, 2013 2:38 PM
>> Subject: M_Boats: Iron centreboard on M17
>>
>>
>>
>> Who can advise the year that the CB was changed from iron to laminate?
>>> Which CB would an '89 M17 be likely to have? Would the ballast be iron
or
>>> lead?
>>>
>>> Thanks,
>>>
>>> Bill Wickett
>>> Makin' Time M17 #622
>>
>> --
>> I am using the free version of SPAMfighter.
>> SPAMfighter has removed 8193 of my spam emails to date.
>> Get the free SPAMfighter here: http://www.spamfighter.com/len
>>
>> Do you have a slow PC? Try a Free scan http://www.spamfighter.com/**
>>
SLOW-PCfighter?cid=sigen<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>
>
>
> ------------------------------
>
> Message: 11
> Date: Wed, 27 Mar 2013 17:58:51 -0400
> From: Bill Wickett <billwick(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Iron centreboard on M17
> Message-ID:
> <CAFd5cDkzye9bja=krMQUPTammug1Nm5TSkAaZG6M6CvhgZmJRQ(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Appreciate the info Dave. Will take a magnet with me when I look at her.
>
> Bill
>
> On Wed, Mar 27, 2013 at 5:55 PM, W David Scobie <wdscobie(a)yahoo.com>
wrote:
>
>> Bill:
>>
>> from information shared by Randy G. -
>>
>> In 1988 (roughly at hull #400) the centerboard was changed from 220 lbs
>> cast iron to the same centerboard as is used in the M15, weighing 40
lbs.
>> The M15 is comprised of a fiberglass-lead-fiberglass sandwich and does
not
>> require a winch to raise and lower. Also, the ballast was increased to
>> compensate for the change in centerboard weight, and the ballast was
>> changed from steel punching to lead. These changes took places over
several
>> boats. For example; our [Randy's] 1988 M17 #410 has the fiberglass
>> centerboard but steel punching ballast.
>>
>> (can't remember where i got this specifically ... what i have is
credited
>> to Randy.)
>>
>>
>> :: Dave Scobie
>>
>>
>> --- On Wed, 3/27/13, Bill Wickett <billwick(a)gmail.com> wrote:
>>
>>>
>>> Who can advise the year that the CB
>>> was changed from iron to laminate?
>>> Which CB would an '89 M17 be likely to have? Would the
>>> ballast be iron or
>>> lead?
>>>
>>> Thanks,
>>>
>>> Bill Wickett
>>> Makin' Time M17 #622
>
>
> ------------------------------
>
> Message: 12
> Date: Wed, 27 Mar 2013 17:16:58 -0700
> From: "R.K. Graves" <rkgraves(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Iron centreboard on M17
> Message-ID:
> <CADyq_zxE=RhQO88CPgAaZ4UxdCoX62fuPvO+D3xs37DAGbJ8ag(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Bill,
>
> The CB change for cast iron to laminated fiberglass/lead occurred around
> hull number 400, roughly early 1988. I have 1988 hull #407 and it has
> the fiberglass/lead CB but steel punchings for ballast. As far as I know
> all the non-cast iron CB's are fiberglass/lead. I believe the same
> fiberglass/lead CB is used on both the 15 and the 17. The change from
steel
> punching to lead ballast occurred sometime after hull #407. The best way
to
> tell which type of ballast a 17 has is to see if a large magnet is
> attracted to the keel (takes a pretty good size magnet for the test).
>
> Randy Graves
>
> On Wed, Mar 27, 2013 at 2:38 PM, Bill Wickett <billwick(a)gmail.com>
wrote:
>
>> Who can advise the year that the CB was changed from iron to laminate?
>> Which CB would an '89 M17 be likely to have? Would the ballast be iron
or
>> lead?
>>
>> Thanks,
>>
>> Bill Wickett
>> Makin' Time M17 #622
>
>
> ------------------------------
>
> Message: 13
> Date: Fri, 29 Mar 2013 09:48:08 -0500
> From: "George R. Iemmolo" <griemmolo2(a)gmail.com>
> To: <montgomery_boats(a)mailman.xmission.com>
> Subject: M_Boats: Flotation
> Message-ID: <DFFF3D5AD99F41C89CDFE154853B17C0@GeorgeHPDV9500>
> Content-Type: text/plain; charset="us-ascii"
>
> I have started to work on my recent acquisition that has been sitting for
> some years unused and in need of some TLC. I find a large amount of
> Styrofoam block beneath the deck. Is this normal?
>
>
>
> George
>
> 96 M15 #602
>
> NoNameYet
>
>
>
> ------------------------------
>
> Message: 14
> Date: Fri, 29 Mar 2013 07:57:16 -0700
> From: Tom Smith <openboatt(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Flotation
> Message-ID:
> <CA+3pONJomet_yD-LHJYd67oGkbbSzd2_9Y48gScUSsi0BNuQOw(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Yes, it's normal. t
>
>
> On Fri, Mar 29, 2013 at 7:48 AM, George R. Iemmolo
<griemmolo2(a)gmail.com>wrote:
>
>> I have started to work on my recent acquisition that has been sitting
for
>> some years unused and in need of some TLC. I find a large amount of
>> Styrofoam block beneath the deck. Is this normal?
>>
>>
>>
>> George
>>
>> 96 M15 #602
>>
>> NoNameYet
>
>
> ------------------------------
>
> Message: 15
> Date: Fri, 29 Mar 2013 11:01:18 -0400
> From: Conbert Benneck <chbenneck(a)sbcglobal.net>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Flotation
> Message-ID: <5155ACBE.7040007(a)sbcglobal.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> On 29-Mar-13 10:48 AM, George R. Iemmolo wrote:
>
> Hi George,
>
> Yes, it's normal.
>
> You'll find styrofoam blocks up in the bow compartment, if you remove
> the screws holding the cover in place.
>
> You'll also find it under the cockpit sole, in the bilge.
>
> Connie
>
> ex M15 #400 LEPPO
>
>
>> I have started to work on my recent acquisition that has been sitting
for
>> some years unused and in need of some TLC. I find a large amount of
>> Styrofoam block beneath the deck. Is this normal?
>>
>>
>>
>> George
>>
>> 96 M15 #602
>>
>> NoNameYet
>
>
>
>
> ------------------------------
>
> Message: 16
> Date: Fri, 29 Mar 2013 09:05:06 -0700 (PDT)
> From: W David Scobie <wdscobie(a)yahoo.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Flotation
> Message-ID:
> <1364573106.18922.YahooMailClassic(a)web121704.mail.ne1.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> George:
>
> to add a photo to the comments already shared that yes the M15 has
positive flotation foam under forward end of the v-berth and under the cockpit
floor i've attached to this email a photo showin under the v-berth (after
unscrewing the locker lid).
>
>
> :: Dave Scobie
> :: former M15 owner - www.freewebs.com/m15-named-scred
>
> --- On Fri, 3/29/13, George R. Iemmolo <griemmolo2(a)gmail.com> wrote:
>
>>
>> I have started to work on my recent
>> acquisition that has been sitting for
>> some years unused and in need of some TLC. I find a large
>> amount of
>> Styrofoam block beneath the deck. Is this normal?
>>
>>
>>
>> George
>>
>> 96 M15 #602
>>
>> NoNameYet? ?
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: bowlocker.jpg
> Type: image/jpeg
> Size: 52507 bytes
> Desc: not available
> URL:
<http://mailman.xmission.com/cgi-bin/mailman/private/montgomery_boats/attach…>
>
> ------------------------------
>
> _______________________________________________
> montgomery_boats mailing list
> montgomery_boats(a)mailman.xmission.com
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
>
> Remember, there is no privacy on the Internet!
>
>
> End of montgomery_boats Digest, Vol 121, Issue 15
> *************************************************
4
3
31 Mar '13
Sorry for the trigger finger. She's a sound design with good self
righting.
sal
In a message dated 3/31/2013 5:39:45 P.M. Mountain Daylight Time,
sailtim(a)yahoo.com writes:
I have a Monty 15, a 2007, hull # 641. It was built by NorSea boat
builders. My beautiful boat doesn't have any added flotation at all under the
vbirth , just a huge storage space under the vbirth. Also, there is no added
flotation under the cockpit floor. There is no added positive flotation
material at all.
I talked to Mr. Eng, owner of the company. He said that the extra
floatation isn't necessary because the boat can't be knocked over. He suggested
that I put an inner tube under the cockpit floor if it bothered me. He did say
that all of the forward individual lockers are floatation.
My opinion is that if you put the weather boards in place and close the
hatch, water isn't going into the cabin.
I can only imagine how bad the cabin would smell with a new inner tube in
it. I don't think tire stores smell that great.
If it gets windy and rough, be sure to put the boards in and close the
hatch, no problem.
Tim Erwin, " Dark Star " # 641
Sent from my iPad
On Mar 29, 2013, at 11:05 AM,
montgomery_boats-request(a)mailman.xmission.com wrote:
> Send montgomery_boats mailing list submissions to
> montgomery_boats(a)mailman.xmission.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
> or, via email, send a message with subject or body 'help' to
> montgomery_boats-request(a)mailman.xmission.com
>
> You can reach the person managing the list at
> montgomery_boats-owner(a)mailman.xmission.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of montgomery_boats digest..."
>
>
> Today's Topics:
>
> 1. Re: Towing with the extension out (GARY M HYDE)
> 2. Re: Lifting the M-15 (John Tyner)
> 3. Re: Towing with the extension out (stevetrapp)
> 4. Re: Towing with the extension out (GARY M HYDE)
> 5. Re: Towing with the extension out (Tom Smith)
> 6. Re: Lifting the M-15 (Robert Hall)
> 7. Iron centreboard on M17 (Bill Wickett)
> 8. Re: Iron centreboard on M17 (jerry montgomery)
> 9. Re: Iron centreboard on M17 (W David Scobie)
> 10. Re: Iron centreboard on M17 (Bill Wickett)
> 11. Re: Iron centreboard on M17 (Bill Wickett)
> 12. Re: Iron centreboard on M17 (R.K. Graves)
> 13. Flotation (George R. Iemmolo)
> 14. Re: Flotation (Tom Smith)
> 15. Re: Flotation (Conbert Benneck)
> 16. Re: Flotation (W David Scobie)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 26 Mar 2013 13:54:06 -1000
> From: GARY M HYDE <gmhyde1(a)mac.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Towing with the extension out
> Message-ID: <16941021-5DD7-4467-9876-2416C5BAA172(a)mac.com>
> Content-Type: text/plain; charset=us-ascii
>
> Steve/
> To answer your other Q, I store indoors in winter.
>
> ~~~_/)~~~ Gary
> Sent from my iPhone :-)
>
> On Mar 26, 2013, at 12:06 PM, stevetrapp <stevetrapp(a)q.com> wrote:
>
>> Gary,
>> I am sure that you know this from experience of driving on the
winding country roads that surround your sailing area on Lake Couer D' Alene. Do
you tow you M-boat home or into town for winter, or store it there at the
boat yard?
>> Steve
>>
>> ----- Original Message -----
>> From: "GARY M HYDE" <gmhyde1(a)mac.com>
>> To: "For and about Montgomery Sailboats"
<montgomery_boats(a)mailman.xmission.com>
>> Sent: Tuesday, March 26, 2013 2:33 PM
>> Subject: Re: M_Boats: Towing with the extension out
>>
>>
>> Actually the sway is less with the long tongue because the car has
better leverage on the trailer.
>>
>> ~~~_/)~~~ Gary
>> Sent from my iPhone :-)
>>
>> On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo" <griemmolo2(a)gmail.com>
wrote:
>>
>>> My concern would be that the pivot point (ball hitch) is an increased
>>> distance from the weight (boat) any sway would be greater than normal
("Give
>>> me a lever long enough and I can move the earth") and could cause the
auto
>>> to be affected.
>>>
>>> George
>>>
>>> -----Original Message-----
>>> From: montgomery_boats-bounces(a)mailman.xmission.com
>>> [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of
Ronald
>>> McNeil
>>> Sent: Monday, March 25, 2013 8:25 PM
>>> To: montgomery_boats(a)mailman.xmission.com
>>> Subject: M_Boats: Towing with the extension out
>>>
>>> I am considering to just tow my M17 with the extension out on the
trailer.
>>> The extension on my Pacific trail is not all that long, while extended
there
>>> is about 4-5 feet of overlap with two pins holding it.
>>>
>>> I tow it about 15 miles back and forth to the lake, no highway but
speeds up
>>> to 55mph.
>>> I know there are ways to set it up to easily extended it without
taking it
>>> off the hitch but I have not gotten around to that yet.
>>>
>>> Does anyone think this would be unsafe or not recommended for some
reason?
>>>
>>>
>>> Thanks,
>>> Ron McNeil
>>> Jackpot
>>
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date:
03/26/13
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 26 Mar 2013 20:11:50 -0400
> From: John Tyner <tynerjr(a)md.metrocast.net>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Lifting the M-15
> Message-ID: <51523946.6010106(a)md.metrocast.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hey! That's my boat! (Now, anyway, I bought it from John Harris (of
> Chesapeake Light Craft) in 2003.)
> ----
> John Tyner
> M-15 #412 "Chimpanzee"
>
> On 3/26/2013 6:22 PM, W David Scobie wrote:
>> lifting an M15 example using a method related to Jerry's comments on
how strong the chainplates and stern cleats are. in this case the 'lifter' is
a forklift -
>>
>> http://msogphotosite.com/MSOG/b15cbrep/b15cbrep1.jpg
>>
>> the description of the above here -
>>
>> http://msogphotosite.com/M15CBRepl.html
>>
>> (you can click the spaces where the images are suppose to be ... still
working on updating the site).
>>
>>
>> here is another way -
>>
>> http://msogphotosite.com/m15garage.html
>>
>> (you can click the spaces where the images are suppose to be ... still
working on updating the site).
>>
>>
>> and another -
>>
>> http://msogphotosite.com/15breezecb.html
>>
>> (you can click the spaces where the images are suppose to be ... still
working on updating the site).
>>
>>
>> if 'smiley' sees these posts he can comment on the lifting bridle he
and a boatyard created. i've seen pictures and it is a VERY nice setup.
>>
>>
>> :: Dave Scobie
>>
>> --- On Tue, 3/26/13, Robert Hall <bert.hall(a)rogers.com> wrote:
>>
>>>
>>> Hello All, Somewhere in the
>>> literature on the net I have seen illustrated instructions
>>> on how to raise a Monty 15 off its trailer and remove the
>>> trailer while lowering the boat onto supports so work can be
>>> done on the bottom/keel. To date my search has failed to
>>> locate any information of use.Do any of my fellow M-15
>>> owners have any advice? Thanks. RTH.
>
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 26 Mar 2013 17:20:28 -0700
> From: "stevetrapp" <stevetrapp(a)q.com>
> To: "For and about Montgomery Sailboats"
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Towing with the extension out
> Message-ID: <5C1E20B4FC8C4BDFB48E03316CCFA7CE@STEVEEW>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Gary,
> Amazing. Particularly towing it with your Subaru Forester. I have a
2001 Subaru Forester that groans to get my M-15 up the hill from Conkling
Park.
> Steve
>
> ----- Original Message -----
> From: "GARY M HYDE" <gmhyde1(a)mac.com>
> To: "For and about Montgomery Sailboats"
<montgomery_boats(a)mailman.xmission.com>
> Sent: Tuesday, March 26, 2013 4:52 PM
> Subject: Re: M_Boats: Towing with the extension out
>
>
> Steve :
> I've towed the M17 about 10,000 miles including from California, to &
from Lake Havasu, 5 times from Pullman to Western WA and back, and many
shorter trips, all with a 2004 Subaru Forester Turbo, rated at 2400 pound towing
capacity. I also adjusted the trailer axle position to produce a 200 pound
tongue weight (about 10% of trailer weight).
> I also have Trailer brakes, wouldn't leave home without em.
> Also, I tow usually with the tongue at mid extension as mentioned
before. That is NOT the maximum extension sometimes used for launching.
>
> ~~~_/)~~~ Gary
> Sent from my iPhone :-)
>
> On Mar 26, 2013, at 12:06 PM, stevetrapp <stevetrapp(a)q.com> wrote:
>
>> Gary,
>> I am sure that you know this from experience of driving on the
winding country roads that surround your sailing area on Lake Couer D' Alene. Do
you tow you M-boat home or into town for winter, or store it there at the
boat yard?
>> Steve
>>
>> ----- Original Message -----
>> From: "GARY M HYDE" <gmhyde1(a)mac.com>
>> To: "For and about Montgomery Sailboats"
<montgomery_boats(a)mailman.xmission.com>
>> Sent: Tuesday, March 26, 2013 2:33 PM
>> Subject: Re: M_Boats: Towing with the extension out
>>
>>
>> Actually the sway is less with the long tongue because the car has
better leverage on the trailer.
>>
>> ~~~_/)~~~ Gary
>> Sent from my iPhone :-)
>>
>> On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo" <griemmolo2(a)gmail.com>
wrote:
>>
>>> My concern would be that the pivot point (ball hitch) is an increased
>>> distance from the weight (boat) any sway would be greater than normal
("Give
>>> me a lever long enough and I can move the earth") and could cause the
auto
>>> to be affected.
>>>
>>> George
>>>
>>> -----Original Message-----
>>> From: montgomery_boats-bounces(a)mailman.xmission.com
>>> [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of
Ronald
>>> McNeil
>>> Sent: Monday, March 25, 2013 8:25 PM
>>> To: montgomery_boats(a)mailman.xmission.com
>>> Subject: M_Boats: Towing with the extension out
>>>
>>> I am considering to just tow my M17 with the extension out on the
trailer.
>>> The extension on my Pacific trail is not all that long, while extended
there
>>> is about 4-5 feet of overlap with two pins holding it.
>>>
>>> I tow it about 15 miles back and forth to the lake, no highway but
speeds up
>>> to 55mph.
>>> I know there are ways to set it up to easily extended it without
taking it
>>> off the hitch but I have not gotten around to that yet.
>>>
>>> Does anyone think this would be unsafe or not recommended for some
reason?
>>>
>>>
>>> Thanks,
>>> Ron McNeil
>>> Jackpot
>>
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date:
03/26/13
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date:
03/26/13
>
>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 26 Mar 2013 15:06:07 -1000
> From: GARY M HYDE <gmhyde1(a)mac.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Towing with the extension out
> Message-ID: <FCD3280D-39B0-45CE-9D55-EB7E5747A8EB(a)mac.com>
> Content-Type: text/plain; charset=us-ascii
>
> The turbocharger is the difference, along with the trailer brakes.
>
> ~~~_/)~~~ Gary
> Sent from my iPhone :-)
>
> On Mar 26, 2013, at 2:20 PM, stevetrapp <stevetrapp(a)q.com> wrote:
>
>> Gary,
>> Amazing. Particularly towing it with your Subaru Forester. I have a
2001 Subaru Forester that groans to get my M-15 up the hill from Conkling
Park.
>> Steve
>>
>> ----- Original Message -----
>> From: "GARY M HYDE" <gmhyde1(a)mac.com>
>> To: "For and about Montgomery Sailboats"
<montgomery_boats(a)mailman.xmission.com>
>> Sent: Tuesday, March 26, 2013 4:52 PM
>> Subject: Re: M_Boats: Towing with the extension out
>>
>>
>> Steve :
>> I've towed the M17 about 10,000 miles including from California, to &
from Lake Havasu, 5 times from Pullman to Western WA and back, and many
shorter trips, all with a 2004 Subaru Forester Turbo, rated at 2400 pound
towing capacity. I also adjusted the trailer axle position to produce a 200
pound tongue weight (about 10% of trailer weight).
>> I also have Trailer brakes, wouldn't leave home without em.
>> Also, I tow usually with the tongue at mid extension as mentioned
before. That is NOT the maximum extension sometimes used for launching.
>>
>> ~~~_/)~~~ Gary
>> Sent from my iPhone :-)
>>
>> On Mar 26, 2013, at 12:06 PM, stevetrapp <stevetrapp(a)q.com> wrote:
>>
>>> Gary,
>>> I am sure that you know this from experience of driving on the
winding country roads that surround your sailing area on Lake Couer D' Alene. Do
you tow you M-boat home or into town for winter, or store it there at the
boat yard?
>>> Steve
>>>
>>> ----- Original Message -----
>>> From: "GARY M HYDE" <gmhyde1(a)mac.com>
>>> To: "For and about Montgomery Sailboats"
<montgomery_boats(a)mailman.xmission.com>
>>> Sent: Tuesday, March 26, 2013 2:33 PM
>>> Subject: Re: M_Boats: Towing with the extension out
>>>
>>>
>>> Actually the sway is less with the long tongue because the car has
better leverage on the trailer.
>>>
>>> ~~~_/)~~~ Gary
>>> Sent from my iPhone :-)
>>>
>>> On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo"
<griemmolo2(a)gmail.com> wrote:
>>>
>>>> My concern would be that the pivot point (ball hitch) is an increased
>>>> distance from the weight (boat) any sway would be greater than normal
("Give
>>>> me a lever long enough and I can move the earth") and could cause the
auto
>>>> to be affected.
>>>>
>>>> George
>>>>
>>>> -----Original Message-----
>>>> From: montgomery_boats-bounces(a)mailman.xmission.com
>>>> [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of
Ronald
>>>> McNeil
>>>> Sent: Monday, March 25, 2013 8:25 PM
>>>> To: montgomery_boats(a)mailman.xmission.com
>>>> Subject: M_Boats: Towing with the extension out
>>>>
>>>> I am considering to just tow my M17 with the extension out on the
trailer.
>>>> The extension on my Pacific trail is not all that long, while
extended there
>>>> is about 4-5 feet of overlap with two pins holding it.
>>>>
>>>> I tow it about 15 miles back and forth to the lake, no highway but
speeds up
>>>> to 55mph.
>>>> I know there are ways to set it up to easily extended it without
taking it
>>>> off the hitch but I have not gotten around to that yet.
>>>>
>>>> Does anyone think this would be unsafe or not recommended for some
reason?
>>>>
>>>>
>>>> Thanks,
>>>> Ron McNeil
>>>> Jackpot
>>>
>>>
>>>
>>> -----
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date:
03/26/13
>>
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date:
03/26/13
>
>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 26 Mar 2013 18:10:33 -0700
> From: Tom Smith <openboatt(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Towing with the extension out
> Message-ID:
> <CA+3pONL_JENXpkAnGrL9h7jCnrRWnfmU_y5gFOGrBQaqvp5fuQ(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Aloha Gary!! t
>
> On Tue, Mar 26, 2013 at 4:39 PM, GARY M HYDE <gmhyde1(a)mac.com> wrote:
>
>> Tom:
>> Once an engineer, always an engineer.
>> Aloha!
>>
>> ~~~_/)~~~ Gary
>> Sent from my iPhone :-)
>>
>> On Mar 26, 2013, at 12:13 PM, Tom Smith <openboatt(a)gmail.com> wrote:
>>
>>> Gary 'bookworm' Hyde... :-) t
>>>
>>> On Tue, Mar 26, 2013 at 2:33 PM, GARY M HYDE <gmhyde1(a)mac.com> wrote:
>>>
>>>> Actually the sway is less with the long tongue because the car has
>> better
>>>> leverage on the trailer.
>>>>
>>>> ~~~_/)~~~ Gary
>>>> Sent from my iPhone :-)
>>>>
>>>> On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo"
<griemmolo2(a)gmail.com>
>>>> wrote:
>>>>
>>>>> My concern would be that the pivot point (ball hitch) is an increased
>>>>> distance from the weight (boat) any sway would be greater than normal
>>>> ("Give
>>>>> me a lever long enough and I can move the earth") and could cause the
>>>> auto
>>>>> to be affected.
>>>>>
>>>>> George
>>>>>
>>>>> -----Original Message-----
>>>>> From: montgomery_boats-bounces(a)mailman.xmission.com
>>>>> [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of
>>>> Ronald
>>>>> McNeil
>>>>> Sent: Monday, March 25, 2013 8:25 PM
>>>>> To: montgomery_boats(a)mailman.xmission.com
>>>>> Subject: M_Boats: Towing with the extension out
>>>>>
>>>>> I am considering to just tow my M17 with the extension out on the
>>>> trailer.
>>>>> The extension on my Pacific trail is not all that long, while
extended
>>>> there
>>>>> is about 4-5 feet of overlap with two pins holding it.
>>>>>
>>>>> I tow it about 15 miles back and forth to the lake, no highway but
>>>> speeds up
>>>>> to 55mph.
>>>>> I know there are ways to set it up to easily extended it without
taking
>>>> it
>>>>> off the hitch but I have not gotten around to that yet.
>>>>>
>>>>> Does anyone think this would be unsafe or not recommended for some
>>>> reason?
>>>>>
>>>>>
>>>>> Thanks,
>>>>> Ron McNeil
>>>>> Jackpot
>
>
> ------------------------------
>
> Message: 6
> Date: Wed, 27 Mar 2013 10:07:15 -0400
> From: "Robert Hall" <bert.hall(a)rogers.com>
> To: "For and about Montgomery Sailboats"
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Lifting the M-15
> Message-ID: <97685DE21DBE418C9E425DEBF3AF049D@Pavilion>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> Hi David, That material you sent is exactly what I need. Many thanks.
RTH.
>
> -----Original Message-----
> From: W David Scobie
> Sent: Tuesday, March 26, 2013 6:22 PM
> To: For and about Montgomery Sailboats
> Subject: Re: M_Boats: Lifting the M-15
>
> lifting an M15 example using a method related to Jerry's comments on how
> strong the chainplates and stern cleats are. in this case the 'lifter'
is a
> forklift -
>
> http://msogphotosite.com/MSOG/b15cbrep/b15cbrep1.jpg
>
> the description of the above here -
>
> http://msogphotosite.com/M15CBRepl.html
>
> (you can click the spaces where the images are suppose to be ... still
> working on updating the site).
>
>
> here is another way -
>
> http://msogphotosite.com/m15garage.html
>
> (you can click the spaces where the images are suppose to be ... still
> working on updating the site).
>
>
> and another -
>
> http://msogphotosite.com/15breezecb.html
>
> (you can click the spaces where the images are suppose to be ... still
> working on updating the site).
>
>
> if 'smiley' sees these posts he can comment on the lifting bridle he and
a
> boatyard created. i've seen pictures and it is a VERY nice setup.
>
>
> :: Dave Scobie
>
> --- On Tue, 3/26/13, Robert Hall <bert.hall(a)rogers.com> wrote:
>
>>
>> Hello All, Somewhere in the
>> literature on the net I have seen illustrated instructions
>> on how to raise a Monty 15 off its trailer and remove the
>> trailer while lowering the boat onto supports so work can be
>> done on the bottom/keel. To date my search has failed to
>> locate any information of use.Do any of my fellow M-15
>> owners have any advice? Thanks. RTH.
>
>
>
>
> ------------------------------
>
> Message: 7
> Date: Wed, 27 Mar 2013 17:38:19 -0400
> From: Bill Wickett <billwick(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: M_Boats: Iron centreboard on M17
> Message-ID:
> <CAFd5cDm=WDVkm2vELVpsxe8FftH06CZwERjj7EJ_1exKc=8e=Q(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Who can advise the year that the CB was changed from iron to laminate?
> Which CB would an '89 M17 be likely to have? Would the ballast be iron or
> lead?
>
> Thanks,
>
> Bill Wickett
> Makin' Time M17 #622
>
>
> ------------------------------
>
> Message: 8
> Date: Wed, 27 Mar 2013 14:50:27 -0700
> From: "jerry montgomery" <jerry(a)jerrymontgomery.org>
> To: "For and about Montgomery Sailboats"
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Iron centreboard on M17
> Message-ID: <D73F15ADF31D4E40B0E04D88BF811D37@jerryws10>
> Content-Type: text/plain; format="flowed"; charset="iso-8859-1";
> reply-type="original"
>
> That was about the time when I switched from steel punchings to lead
shot in
> the ballast; I'd guess that your boat has lead ballast but the old
iron
> board. You can check the ballast by running a compass or magnet over
the
> keel, and the board by crawling under and looking.
>
> jerry
> ----- Original Message -----
> From: "Bill Wickett" <billwick(a)gmail.com>
> To: "For and about Montgomery Sailboats"
> <montgomery_boats(a)mailman.xmission.com>
> Sent: Wednesday, March 27, 2013 2:38 PM
> Subject: M_Boats: Iron centreboard on M17
>
>
>> Who can advise the year that the CB was changed from iron to laminate?
>> Which CB would an '89 M17 be likely to have? Would the ballast be iron
or
>> lead?
>>
>> Thanks,
>>
>> Bill Wickett
>> Makin' Time M17 #622
>
>
> --
> I am using the free version of SPAMfighter.
> SPAMfighter has removed 8193 of my spam emails to date.
> Get the free SPAMfighter here: http://www.spamfighter.com/len
>
> Do you have a slow PC? Try a Free scan
http://www.spamfighter.com/SLOW-PCfighter?cid=sigen
>
>
>
>
>
> ------------------------------
>
> Message: 9
> Date: Wed, 27 Mar 2013 14:55:10 -0700 (PDT)
> From: W David Scobie <wdscobie(a)yahoo.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Iron centreboard on M17
> Message-ID:
> <1364421310.65307.YahooMailClassic(a)web121702.mail.ne1.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Bill:
>
> from information shared by Randy G. -
>
> In 1988 (roughly at hull #400) the centerboard was changed from 220 lbs
cast iron to the same centerboard as is used in the M15, weighing 40 lbs.
The M15 is comprised of a fiberglass-lead-fiberglass sandwich and does not
require a winch to raise and lower. Also, the ballast was increased to
compensate for the change in centerboard weight, and the ballast was changed
from steel punching to lead. These changes took places over several boats. For
example; our [Randy's] 1988 M17 #410 has the fiberglass centerboard but
steel punching ballast.
>
> (can't remember where i got this specifically ... what i have is
credited to Randy.)
>
>
> :: Dave Scobie
>
>
> --- On Wed, 3/27/13, Bill Wickett <billwick(a)gmail.com> wrote:
>
>>
>> Who can advise the year that the CB
>> was changed from iron to laminate?
>> Which CB would an '89 M17 be likely to have? Would the
>> ballast be iron or
>> lead?
>>
>> Thanks,
>>
>> Bill Wickett
>> Makin' Time M17? #622
>
>
>
> ------------------------------
>
> Message: 10
> Date: Wed, 27 Mar 2013 17:57:50 -0400
> From: Bill Wickett <billwick(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Iron centreboard on M17
> Message-ID:
> <CAFd5cD=WEn1_Gox2K7_FNXi_F0=6Dpes_QuQtK=She8j2XVAcQ(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Thank you Jerry
>
> On Wed, Mar 27, 2013 at 5:50 PM, jerry montgomery
<jerry(a)jerrymontgomery.org
>> wrote:
>
>> That was about the time when I switched from steel punchings to lead
shot
>> in the ballast; I'd guess that your boat has lead ballast but the old
>> iron board. You can check the ballast by running a compass or magnet
over
>> the keel, and the board by crawling under and looking.
>>
>> jerry
>> ----- Original Message ----- From: "Bill Wickett" <billwick(a)gmail.com>
>> To: "For and about Montgomery Sailboats" <montgomery_boats(a)mailman.**
>> xmission.com <montgomery_boats(a)mailman.xmission.com>>
>> Sent: Wednesday, March 27, 2013 2:38 PM
>> Subject: M_Boats: Iron centreboard on M17
>>
>>
>>
>> Who can advise the year that the CB was changed from iron to laminate?
>>> Which CB would an '89 M17 be likely to have? Would the ballast be iron
or
>>> lead?
>>>
>>> Thanks,
>>>
>>> Bill Wickett
>>> Makin' Time M17 #622
>>
>> --
>> I am using the free version of SPAMfighter.
>> SPAMfighter has removed 8193 of my spam emails to date.
>> Get the free SPAMfighter here: http://www.spamfighter.com/len
>>
>> Do you have a slow PC? Try a Free scan http://www.spamfighter.com/**
>>
SLOW-PCfighter?cid=sigen<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>
>
>
> ------------------------------
>
> Message: 11
> Date: Wed, 27 Mar 2013 17:58:51 -0400
> From: Bill Wickett <billwick(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Iron centreboard on M17
> Message-ID:
> <CAFd5cDkzye9bja=krMQUPTammug1Nm5TSkAaZG6M6CvhgZmJRQ(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Appreciate the info Dave. Will take a magnet with me when I look at her.
>
> Bill
>
> On Wed, Mar 27, 2013 at 5:55 PM, W David Scobie <wdscobie(a)yahoo.com>
wrote:
>
>> Bill:
>>
>> from information shared by Randy G. -
>>
>> In 1988 (roughly at hull #400) the centerboard was changed from 220 lbs
>> cast iron to the same centerboard as is used in the M15, weighing 40
lbs.
>> The M15 is comprised of a fiberglass-lead-fiberglass sandwich and does
not
>> require a winch to raise and lower. Also, the ballast was increased to
>> compensate for the change in centerboard weight, and the ballast was
>> changed from steel punching to lead. These changes took places over
several
>> boats. For example; our [Randy's] 1988 M17 #410 has the fiberglass
>> centerboard but steel punching ballast.
>>
>> (can't remember where i got this specifically ... what i have is
credited
>> to Randy.)
>>
>>
>> :: Dave Scobie
>>
>>
>> --- On Wed, 3/27/13, Bill Wickett <billwick(a)gmail.com> wrote:
>>
>>>
>>> Who can advise the year that the CB
>>> was changed from iron to laminate?
>>> Which CB would an '89 M17 be likely to have? Would the
>>> ballast be iron or
>>> lead?
>>>
>>> Thanks,
>>>
>>> Bill Wickett
>>> Makin' Time M17 #622
>
>
> ------------------------------
>
> Message: 12
> Date: Wed, 27 Mar 2013 17:16:58 -0700
> From: "R.K. Graves" <rkgraves(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Iron centreboard on M17
> Message-ID:
> <CADyq_zxE=RhQO88CPgAaZ4UxdCoX62fuPvO+D3xs37DAGbJ8ag(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Bill,
>
> The CB change for cast iron to laminated fiberglass/lead occurred around
> hull number 400, roughly early 1988. I have 1988 hull #407 and it has
> the fiberglass/lead CB but steel punchings for ballast. As far as I know
> all the non-cast iron CB's are fiberglass/lead. I believe the same
> fiberglass/lead CB is used on both the 15 and the 17. The change from
steel
> punching to lead ballast occurred sometime after hull #407. The best way
to
> tell which type of ballast a 17 has is to see if a large magnet is
> attracted to the keel (takes a pretty good size magnet for the test).
>
> Randy Graves
>
> On Wed, Mar 27, 2013 at 2:38 PM, Bill Wickett <billwick(a)gmail.com>
wrote:
>
>> Who can advise the year that the CB was changed from iron to laminate?
>> Which CB would an '89 M17 be likely to have? Would the ballast be iron
or
>> lead?
>>
>> Thanks,
>>
>> Bill Wickett
>> Makin' Time M17 #622
>
>
> ------------------------------
>
> Message: 13
> Date: Fri, 29 Mar 2013 09:48:08 -0500
> From: "George R. Iemmolo" <griemmolo2(a)gmail.com>
> To: <montgomery_boats(a)mailman.xmission.com>
> Subject: M_Boats: Flotation
> Message-ID: <DFFF3D5AD99F41C89CDFE154853B17C0@GeorgeHPDV9500>
> Content-Type: text/plain; charset="us-ascii"
>
> I have started to work on my recent acquisition that has been sitting for
> some years unused and in need of some TLC. I find a large amount of
> Styrofoam block beneath the deck. Is this normal?
>
>
>
> George
>
> 96 M15 #602
>
> NoNameYet
>
>
>
> ------------------------------
>
> Message: 14
> Date: Fri, 29 Mar 2013 07:57:16 -0700
> From: Tom Smith <openboatt(a)gmail.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Flotation
> Message-ID:
> <CA+3pONJomet_yD-LHJYd67oGkbbSzd2_9Y48gScUSsi0BNuQOw(a)mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Yes, it's normal. t
>
>
> On Fri, Mar 29, 2013 at 7:48 AM, George R. Iemmolo
<griemmolo2(a)gmail.com>wrote:
>
>> I have started to work on my recent acquisition that has been sitting
for
>> some years unused and in need of some TLC. I find a large amount of
>> Styrofoam block beneath the deck. Is this normal?
>>
>>
>>
>> George
>>
>> 96 M15 #602
>>
>> NoNameYet
>
>
> ------------------------------
>
> Message: 15
> Date: Fri, 29 Mar 2013 11:01:18 -0400
> From: Conbert Benneck <chbenneck(a)sbcglobal.net>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Flotation
> Message-ID: <5155ACBE.7040007(a)sbcglobal.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> On 29-Mar-13 10:48 AM, George R. Iemmolo wrote:
>
> Hi George,
>
> Yes, it's normal.
>
> You'll find styrofoam blocks up in the bow compartment, if you remove
> the screws holding the cover in place.
>
> You'll also find it under the cockpit sole, in the bilge.
>
> Connie
>
> ex M15 #400 LEPPO
>
>
>> I have started to work on my recent acquisition that has been sitting
for
>> some years unused and in need of some TLC. I find a large amount of
>> Styrofoam block beneath the deck. Is this normal?
>>
>>
>>
>> George
>>
>> 96 M15 #602
>>
>> NoNameYet
>
>
>
>
> ------------------------------
>
> Message: 16
> Date: Fri, 29 Mar 2013 09:05:06 -0700 (PDT)
> From: W David Scobie <wdscobie(a)yahoo.com>
> To: For and about Montgomery Sailboats
> <montgomery_boats(a)mailman.xmission.com>
> Subject: Re: M_Boats: Flotation
> Message-ID:
> <1364573106.18922.YahooMailClassic(a)web121704.mail.ne1.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> George:
>
> to add a photo to the comments already shared that yes the M15 has
positive flotation foam under forward end of the v-berth and under the cockpit
floor i've attached to this email a photo showin under the v-berth (after
unscrewing the locker lid).
>
>
> :: Dave Scobie
> :: former M15 owner - www.freewebs.com/m15-named-scred
>
> --- On Fri, 3/29/13, George R. Iemmolo <griemmolo2(a)gmail.com> wrote:
>
>>
>> I have started to work on my recent
>> acquisition that has been sitting for
>> some years unused and in need of some TLC. I find a large
>> amount of
>> Styrofoam block beneath the deck. Is this normal?
>>
>>
>>
>> George
>>
>> 96 M15 #602
>>
>> NoNameYet? ?
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: bowlocker.jpg
> Type: image/jpeg
> Size: 52507 bytes
> Desc: not available
> URL:
<http://mailman.xmission.com/cgi-bin/mailman/private/montgomery_boats/attach…>
>
> ------------------------------
>
> _______________________________________________
> montgomery_boats mailing list
> montgomery_boats(a)mailman.xmission.com
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
>
> Remember, there is no privacy on the Internet!
>
>
> End of montgomery_boats Digest, Vol 121, Issue 15
> *************************************************
1
0
I could not find any info on size, length & type of various lines for the
M15 on the MSOG site. Can someone point me in the right direction for this
information?
George
M15 #602
NoNameYet
2
1
George:
based on the pictures i saw of your boat my guess was that 'bulkheaded' area in the forward part of the v-berth is filled with foam ... but no guarantee. the builder, Chuck, may have just made a 'box full of air' and put it there. if there is a hole in an 'air box' the boat can still sink. the other negative of a box of foam, or air, is if there is small hole the area can fill with some water and mold will grow (dark space with little/no airflow).
the other issue i saw was that 'bulkheaded space' seemed smaller than the area Jerry filled with foam (see the picture i sent before). if this is the case there may not be enough foam/air to float the boat.
now, the other perspective on this is not to worry about the boat floating if swamped/holed. i learned to sail on boats that would sink. my folk's boat was a 32' Cheoy Lee ... no way to keep her above the surface if she was holed. my personal perspective is i don't expect a swamped/holed boat to float so i don't 'worry' about flotation foam. what i worry about is not hitting something and holing the boat; or getting swamped (and why i put the hatchboards in place if the wind/seas come up).
with the above said on my M15 if i were to have taken a long distance/time cruise (ie, up the inside passage from WA to AK) i would have taken out the foam so i would have more space to store food and water. again, this is what i, Dave, would do for myself.
i sail my M17, that has no flotation foam, with no concerns.
:: Dave Scobie
--- On Fri, 3/29/13, George R. Iemmolo <griemmolo2(a)gmail.com> wrote:
> Connie
>
> In my unit there is small 2'x2' compartment that seals off
> the rest of the
> area under the bunks. I have to make an assumption that the
> rest of the area
> is filled with Styrofoam blocks. Do not have a small digital
> snake camera to
> check it out from the compartments under the side seats.
>
> Thanks for the prompt feed back. I know I will be seeking a
> great deal of
> information as I progress with my cleanup and rigging.
>
> George
>
>
> -----Original Message-----
> From: montgomery_boats-bounces(a)mailman.xmission.com
> [mailto:montgomery_boats-bounces@mailman.xmission.com]
> On Behalf Of Conbert
> Benneck
> Sent: Friday, March 29, 2013 10:01 AM
>
>
> Hi George,
>
> Yes, it's normal.
>
> You'll find styrofoam blocks up in the bow compartment, if
> you remove
> the screws holding the cover in place.
>
> You'll also find it under the cockpit sole, in the bilge.
>
> Connie
>
> ex M15Â #400 LEPPO
>
> > On 29-Mar-13 10:48 AM, George R. Iemmolo wrote:
> >
> > I have started to work on my recent acquisition that
> has been sitting for
> > some years unused and in need of some TLC. I find a
> large amount of
> > Styrofoam block beneath the deck. Is this normal?
> >
> >Â Â Â
> >
> > George
> >
> > 96 M15 #602
> >
> > NoNameYet
> >
> >
>
>
>
>
>
2
1
George:
to add a photo to the comments already shared that yes the M15 has positive flotation foam under forward end of the v-berth and under the cockpit floor i've attached to this email a photo showin under the v-berth (after unscrewing the locker lid).
:: Dave Scobie
:: former M15 owner - www.freewebs.com/m15-named-scred
--- On Fri, 3/29/13, George R. Iemmolo <griemmolo2(a)gmail.com> wrote:
>
> I have started to work on my recent
> acquisition that has been sitting for
> some years unused and in need of some TLC. I find a large
> amount of
> Styrofoam block beneath the deck. Is this normal?
>
>
>
> George
>
> 96 M15 #602
>
> NoNameYet Â
>
>
2
1