Hey Joel, I've just about got this working.. I think I've missed a piece. There are no alarms. I call the calls come in... but a modem on the dsp doesn't seem to get mapped to the call. Slot1 DSP/span1> display atstat Tslot Status Modem Status Call ID Action Span Connect Srvc State Queued Status 01 Idle N/A IS 0x00000000 NONE Ok 02 Idle N/A IS 0x00000000 NONE Ok 03 Dial In 003 IS 0x00020002 NONE Ok 04 Idle N/A IS 0x00000000 NONE Ok 05 Idle N/A IS 0x00000000 NONE Ok 06 Idle N/A IS 0x00000000 NONE Ok 07 Idle N/A IS 0x00000000 NONE Ok 08 Idle N/A IS 0x00000000 NONE Ok Slot1 DSP/span1> display atconfig Tslot Block Assigned Service ID Description Call Type Chan State 01 NONE 01 IS Cheers, -Tom 02 NONE 02 IS On 29 Jan 2005 at 17:06, Joel - Fox Computers wrote:
They work with both CT1 or PRI - nothing required
-----Original Message----- From: GiGoNET Support [mailto:tom@gigonet.com] Sent: Saturday, January 29, 2005 5:05 PM To: usr-tc@mailman.xmission.com Subject: [USR-TC] Channelized T1 Question
Is it possible to flash the DSP T1/E1 card to work with CT1 verse PRI?
Cheers, -Tom
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc