Hey Joel,

I've just about got this working.. I think I've missed a piece.
There are no alarms. I call the calls come in... but a modem
on the dsp doesn't seem to get mapped to the call.

Slot1 DSP/span1>  display atstat

Tslot  Status   Modem    Status        Call ID        Action    Span
               Connect Srvc State                     Queued    Status
01      Idle    N/A          IS      0x00000000        NONE    Ok
02      Idle    N/A          IS      0x00000000        NONE    Ok
03   Dial In    003          IS      0x00020002        NONE    Ok
04      Idle    N/A          IS      0x00000000        NONE    Ok
05      Idle    N/A          IS      0x00000000        NONE    Ok
06      Idle    N/A          IS      0x00000000        NONE    Ok
07      Idle    N/A          IS      0x00000000        NONE    Ok
08      Idle    N/A          IS      0x00000000        NONE    Ok

Slot1 DSP/span1> display atconfig

Tslot   Block   Assigned   Service  ID Description
      Call Type   Chan      State
01       NONE     01          IS

Cheers,
-Tom

02       NONE     02          IS







On 29 Jan 2005 at 17:06, Joel - Fox Computers wrote:

> They work with both CT1 or PRI - nothing required
>
> -----Original Message-----
> From: GiGoNET Support [mailto:tom@gigonet.com]
> Sent: Saturday, January 29, 2005 5:05 PM
> To: usr-tc@mailman.xmission.com
> Subject: [USR-TC] Channelized T1 Question
>
>
> Is it possible to flash the DSP T1/E1 card to
> work with CT1 verse PRI?
>
> Cheers,
> -Tom
>
>
> _______________________________________________
> USR-TC mailing list
> USR-TC@mailman.xmission.com
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
>
>
>
>
> _______________________________________________
> USR-TC mailing list
> USR-TC@mailman.xmission.com
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
>