That's correct...if you're using more then 1 arc you need to configure MPIP else if it's just 1 arc radius (sim use=2) will work by itself. Todd ----- Original Message ----- From: Joel - Fox Computers To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Sent: Friday, May 28, 2004 12:09 AM Subject: RE: [USR-TC] Multilink PPP Problem I believe you need to configure MPIP if you are using more than one ARC. - Joel -----Original Message----- From: John R. Aynesworth [mailto:jra@hcsinc.com] Sent: Thursday, May 27, 2004 10:48 AM To: usr-tc@mailman.xmission.com Subject: [USR-TC] Multilink PPP Problem I don't have MPIP configured at all--as best I can figure, that would only be necessary if I had more than one Total Control. Am I wrong? John R. Aynesworth Alexssa/Hnet 303 N. Main St. West Bend, WI 53095 voice: (262) 338-3742 fax: (262) 338-3387 email: jra@hnet.net ------------------------------------------------------------------------------ _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc