That's correct...if you're using more then 1 arc you need to configure MPIP else if it's just 1 arc radius (sim use=2) will work by itself.
 
Todd
----- Original Message -----
From: Joel - Fox Computers
To: Discussion relating to the 3Com/US Robotics Total Control modemsystems.
Sent: Friday, May 28, 2004 12:09 AM
Subject: RE: [USR-TC] Multilink PPP Problem

I believe you need to configure MPIP if you are using more than one ARC.
 
- Joel
 
 
-----Original Message-----
From: John R. Aynesworth [mailto:jra@hcsinc.com]
Sent: Thursday, May 27, 2004 10:48 AM
To: usr-tc@mailman.xmission.com
Subject: [USR-TC] Multilink PPP Problem

I don't have MPIP configured at all--as best I can figure, that would only be necessary if I had more than one Total Control.  Am I wrong?
 
John R. Aynesworth
Alexssa/Hnet
303 N. Main St.
West Bend, WI 53095
voice: (262) 338-3742
fax: (262) 338-3387
email: jra@hnet.net


_______________________________________________
USR-TC mailing list
USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc